* do endpoint/slice check in retry loop
Signed-off-by: Chris O'Haver <cohaver@infoblox.com>

* plugin/bind: exclude interface or ip address
Signed-off-by: Mohammad Yosefpor <myusefpur@gmail.com>

* fix README.md
Signed-off-by: Mohammad Yosefpor <myusefpur@gmail.com>

* Apply suggestions, Fix test
Signed-off-by: Mohammad Yosefpor <myusefpur@gmail.com>

* Apply suggestions, move errs to setup
Signed-off-by: Mohammad Yosefpor <myusefpur@gmail.com>

Signed-off-by: Frank Riley <fhriley@gmail.com>

To combat label cardinality explosions remove the type from metrics.
This was most severe in the histogram for request duration, remove it
there.

It's also highlighted difference between grpc and forward code, where
forward did use type and grpc didn't; getting rid of all that "fixes"
that discrepancy

Move monitor.go back into the vars directory and make it private again.
Also name it slightly better

Fixes: #4507
Signed-off-by: Miek Gieben <miek@miek.nl>

When the interface doesn't exist you get:

plugin/bind: not a valid IP address: eth0

Fix the wording that this can also be interface name. Also %q the
argument in the error mesg.
Signed-off-by: Miek Gieben <miek@miek.nl>

* Discard link-local addresses on binding
Signed-off-by: Mohammad Yosefpor <myusefpur@gmail.com>

* Update plugin/bind: README.md
Signed-off-by: Mohammad Yosefpor <myusefpur@gmail.com>

* Except for IPv6 link-local only
Signed-off-by: Mohammad Yosefpor <myusefpur@gmail.com>

This moves all workflows that commit to a schedule, so that it _doesn't_
push into peoples PRs as that enlarges them and is just non-obvious.

They run throughout the week.

Also change the "user" we use for this, so that DCO believes it a real
email address (DCO is pretty stupid here). Update the authors target to
filter out this bot as well.
Signed-off-by: Miek Gieben <miek@miek.nl>

Signed-off-by: coredns-auto-go-mod-tidy[bot] <coredns-auto-go-mod-tidy[bot]@users.noreply.github.com>

* auto make -f Makefile.doc
Signed-off-by: Mohammad Yosefpor <myusefpur@gmail.com>

* Bind by interface name
Signed-off-by: Mohammad Yosefpor <myusefpur@gmail.com>

* README.md: Interface with multiple address
Signed-off-by: Mohammad Yosefpor <myusefpur@gmail.com>

* auto make -f Makefile.doc
Signed-off-by: Mohammad Yosefpor <myusefpur@gmail.com>

* auto make -f Makefile.doc
Signed-off-by: Mohammad Yosefpor <myusefpur@gmail.com>

* Elaborate more on the behaviour in README.md, revert man/*, fix tests
Signed-off-by: Mohammad Yosefpor <myusefpur@gmail.com>

* auto make -f Makefile.doc
Signed-off-by: Mohammad Yosefpor <myusefpur@gmail.com>

* --sign-off

Revert man/* to fix DCO check
Signed-off-by: Mohammad Yosefpor <myusefpur@gmail.com>

* auto make -f Makefile.doc

* Revert man/* to fix DCO check
Signed-off-by: Mohammad Yosefpor <myusefpur@gmail.com>
Co-authored-by: coredns-auto-go-mod-tidy[bot] <coredns-auto-go-mod-tidy[bot]@users.noreply.github.com>

This doesn't do much, but at least it doesn't litter PRs with non-signed
commits. This should keep the DCO clean(er)
Signed-off-by: Miek Gieben <miek@miek.nl>

Signed-off-by: Chris O'Haver <cohaver@infoblox.com>

Signed-off-by: Chris O'Haver <cohaver@infoblox.com>

So there is (and will always) be a disconnect between latest Go in the
workflow and the actual latest Go used by other utils. Faillint move to
go 1.16 features and for some reason this now borkes.

Add ||true to allow failling to not compile, this will skip that
particular test (so be it)
Signed-off-by: Miek Gieben <miek@miek.nl>

Bumps [github.com/miekg/dns](https://github.com/miekg/dns) from 1.1.38 to 1.1.40.
- [Release notes](https://github.com/miekg/dns/releases)
- [Changelog](https://github.com/miekg/dns/blob/master/Makefile.release)
- [Commits](https://github.com/miekg/dns/compare/v1.1.38...v1.1.40)
Signed-off-by: dependabot-preview[bot] <support@dependabot.com>
Co-authored-by: dependabot-preview[bot] <27856297+dependabot-preview[bot]@users.noreply.github.com>

presubmit failing, fix import path.
Signed-off-by: Miek Gieben <miek@miek.nl>

This reverts commit c4720b8a.

* Added minimal-responses plugin
Signed-off-by: Soumya Ghosh Dastidar <gdsoumya@gmail.com>

* Removed unnecessary comments

* Updated tests
Signed-off-by: Soumya Ghosh Dastidar <gdsoumya@gmail.com>

* Reformated imports
Signed-off-by: Soumya Ghosh Dastidar <gdsoumya@gmail.com>

* Updated package name
Signed-off-by: Soumya Ghosh Dastidar <gdsoumya@gmail.com>

* Removed  unnecessary comments
Co-authored-by: Miek Gieben <miek@miek.nl>

* Added changes
Signed-off-by: Soumya Ghosh Dastidar <gdsoumya@gmail.com>

* updated
Signed-off-by: Soumya Ghosh Dastidar <gdsoumya@gmail.com>

* Updated comment for NextOrFailure
Signed-off-by: Soumya Ghosh Dastidar <gdsoumya@gmail.com>

* Updated to test.Case for testing
Signed-off-by: Soumya Ghosh Dastidar <gdsoumya@gmail.com>

* Formated imports using goimports
Signed-off-by: Soumya Ghosh Dastidar <gdsoumya@gmail.com>
Co-authored-by: Miek Gieben <miek@miek.nl>

* transfer: reply with refused

When the *transfer* plugin is not loaded and of the handlers will still
see the AXFR/IXFR request because it is not intercepted.

They need to reply with REFUSED in that case. Update file, auto and k8s
to do this. Add testcase in the file plugin.

Ideally *erratic* should be moved over as well, but maybe that's
*erratic*

This is a bug fix.
Signed-off-by: Miek Gieben <miek@miek.nl>

* import path
Signed-off-by: Miek Gieben <miek@miek.nl>

Update go.mod to 1.16 and make the workflows default to the latest
available.
Signed-off-by: Miek Gieben <miek@miek.nl>

Watching TGI Kubernetes 147 and it helps to show a small zonefile
example in the documentation.
Signed-off-by: Miek Gieben <miek@miek.nl>

A generic question might be more suited for a discussion, add pointer to
the issue template.
Signed-off-by: Miek Gieben <miek@miek.nl>

When err=nil try to determine the version of the k8s cluster and disable
endpoint slices. Don't return from connecting to the cluster.

In the future we should just default to true, and delete all this code.
Signed-off-by: Miek Gieben <miek@miek.nl>

Signed-off-by: Chris O'Haver <cohaver@infoblox.com>

Just dry-run all important targets.
Signed-off-by: Miek Gieben <miek@miek.nl>

See #4484
Signed-off-by: Miek Gieben <miek@miek.nl>

Signed-off-by: Miek Gieben <miek@miek.nl>

Move the make syntax out of the shell syntax section and pull it to the
top of the file.

Also add notes on how to test this script. And yes Makefile syntax is
pretty horrible. Testing on a release machine with my personal docker
repo.
Signed-off-by: Miek Gieben <miek@miek.nl>

See #4479
Signed-off-by: Miek Gieben <miek@miek.nl>

Update the notes and set the date to tomorrow.

See #4479
Signed-off-by: Miek Gieben <miek@miek.nl>

unsure why this only pops up, but the yaml was not correct for this
workflow. Randomly added whitespace until it parsed as proper yaml
Signed-off-by: Miek Gieben <miek@miek.nl>

* Rewrite plugin - rewrite SRV targets and names in response answer and additional records
Signed-off-by: Nic Colledge <nic@njcolledge.net>

* Added README content to describe new behaviour
Signed-off-by: Nic Colledge <nic@njcolledge.net>

* Added more record types to rewrite handling based on PR/Issue feedback
Signed-off-by: Nic Colledge <nic@njcolledge.net>

* Updated README.md for plugin
Signed-off-by: Nic Colledge <nic@njcolledge.net>

* Updated unit tests.
Small refactor of getTarget... function.
Signed-off-by: Nic Colledge <nic@njcolledge.net>

* Refactor to add response value rewrite as answer value option
Signed-off-by: Nic Colledge <nic@njcolledge.net>

* Removed TODO comment, added test for NAPTR record.
Signed-off-by: Nic Colledge <nic@njcolledge.net>