Some whitespace adjustment.

git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@4500 dfc29bdd-3216-0410-991c-e03cc46cb475

include/ECullingTypes.h

@@ -29,7 +29,7 @@ namespace scene
 		"box",			// camera box against node box
 		"frustum_box",		// camera frustum against node box
 		"frustum_sphere",	// camera frustum against node sphere
-		"occ_query",	// occlusion query
+		"occ_query",		// occlusion query
 		0
 	};
 

include/ESceneNodeTypes.h

@@ -19,7 +19,7 @@ namespace scene
 	enum ESCENE_NODE_TYPE
 	{
 		//! of type CSceneManager (note that ISceneManager is not(!) an ISceneNode)
-		ESNT_SCENE_MANAGER	= MAKE_IRR_ID('s','m','n','g'),
+		ESNT_SCENE_MANAGER  = MAKE_IRR_ID('s','m','n','g'),
 
 		//! simple cube scene node
 		ESNT_CUBE           = MAKE_IRR_ID('c','u','b','e'),

include/IAnimatedMeshMD3.h

@@ -80,17 +80,17 @@ namespace scene
 	//! this holds the header info of the MD3 file
 	struct SMD3Header
 	{
-		c8	headerID[4];	//id of file, always "IDP3"
-		s32	Version;	//this is a version number, always 15
-		s8	fileName[68];	//sometimes left Blank... 65 chars, 32bit aligned == 68 chars
-		s32	numFrames;	//number of KeyFrames
-		s32	numTags;	//number of 'tags' per frame
-		s32	numMeshes;	//number of meshes/skins
-		s32	numMaxSkins;	//maximum number of unique skins used in md3 file. artefact md2
-		s32	frameStart;	//starting position of frame-structur
-		s32	tagStart;	//starting position of tag-structures
-		s32	tagEnd;		//ending position of tag-structures/starting position of mesh-structures
-		s32	fileSize;
+		c8 headerID[4];	//id of file, always "IDP3"
+		s32 Version;	//this is a version number, always 15
+		s8 fileName[68];//sometimes left Blank... 65 chars, 32bit aligned == 68 chars
+		s32 numFrames;	//number of KeyFrames
+		s32 numTags;	//number of 'tags' per frame
+		s32 numMeshes;	//number of meshes/skins
+		s32 numMaxSkins;//maximum number of unique skins used in md3 file. artefact md2
+		s32 frameStart;	//starting position of frame-structur
+		s32 tagStart;	//starting position of tag-structures
+		s32 tagEnd;	//ending position of tag-structures/starting position of mesh-structures
+		s32 fileSize;
 	} PACK_STRUCT;
 
 	//! this holds the header info of an MD3 mesh section

include/ICameraSceneNode.h

@@ -76,7 +76,7 @@ namespace scene
 		/** If the camera's target and rotation are bound ( @see
 		bindTargetAndRotation() ) then calling this will also change
 		the camera's scene node rotation to match the target.
-		Note that setTarget uses the current absolute position 
+		Note that setTarget uses the current absolute position
 		internally, so if you changed setPosition since last rendering you must
 		call updateAbsolutePosition before using this function.
 		\param pos Look at target of the camera, in world co-ordinates. */
@@ -179,7 +179,7 @@ namespace scene
 
 			if (!out)
 				return;
-			out->addBool	("IsOrthogonal", IsOrthogonal );
+			out->addBool("IsOrthogonal", IsOrthogonal);
 		}
 
 		//! Reads attributes of the camera node

include/ICursorControl.h

@@ -20,19 +20,19 @@ namespace gui
 	enum ECURSOR_ICON
 	{
 		// Following cursors might be system specific, or might use an Irrlicht icon-set. No guarantees so far.
-		ECI_NORMAL,		// arrow
-		ECI_CROSS,		// Crosshair
-		ECI_HAND, 		// Hand
-		ECI_HELP,		// Arrow and question mark
-		ECI_IBEAM,		// typical text-selection cursor
-		ECI_NO, 		// should not click icon
-		ECI_WAIT, 		// hourclass
-		ECI_SIZEALL,  	// arrow in all directions
+		ECI_NORMAL,	// arrow
+		ECI_CROSS,	// Crosshair
+		ECI_HAND,	// Hand
+		ECI_HELP,	// Arrow and question mark
+		ECI_IBEAM,	// typical text-selection cursor
+		ECI_NO,		// should not click icon
+		ECI_WAIT,	// hourclass
+		ECI_SIZEALL,	// arrow in all directions
 		ECI_SIZENESW,	// resizes in direction north-east or south-west
-		ECI_SIZENWSE, 	// resizes in direction north-west or south-east
-		ECI_SIZENS, 	// resizes in direction north or south
-		ECI_SIZEWE, 	// resizes in direction west or east
-		ECI_UP,			// up-arrow
+		ECI_SIZENWSE,	// resizes in direction north-west or south-east
+		ECI_SIZENS,	// resizes in direction north or south
+		ECI_SIZEWE,	// resizes in direction west or east
+		ECI_UP,		// up-arrow
 
 		// Implementer note: Should we add system specific cursors, which use guaranteed the system icons,
 		// then I would recommend using a naming scheme like ECI_W32_CROSS, ECI_X11_CROSSHAIR and adding those

include/IEventReceiver.h

@@ -216,7 +216,7 @@ namespace irr
 			//! The text in an editbox was changed. This does not include automatic changes in text-breaking.
 			EGET_EDITBOX_CHANGED,
 
-            //! The marked area in an editbox was changed.
+			//! The marked area in an editbox was changed.
 			EGET_EDITBOX_MARKING_CHANGED,
 
 			//! The tab was changed in an tab control
@@ -345,7 +345,7 @@ struct SEvent
 		{
 			NUMBER_OF_BUTTONS = 32,
 
-			AXIS_X = 0, // e.g. analog stick 1 left to right
+			AXIS_X = 0,	// e.g. analog stick 1 left to right
 			AXIS_Y,		// e.g. analog stick 1 top to bottom
 			AXIS_Z,		// e.g. throttle, or analog 2 stick 2 left to right
 			AXIS_R,		// e.g. rudder, or analog 2 stick 2 top to bottom
@@ -454,18 +454,18 @@ struct SJoystickInfo
 	/** This is an internal Irrlicht index; it does not map directly
 	 * to any particular hardware joystick. It corresponds to the
 	 * irr::SJoystickEvent Joystick ID. */
-	u8				Joystick;
+	u8 Joystick;
 
 	//! The name that the joystick uses to identify itself.
-	core::stringc	Name;
+	core::stringc Name;
 
 	//! The number of buttons that the joystick has.
-	u32				Buttons;
+	u32 Buttons;
 
 	//! The number of axes that the joystick has, i.e. X, Y, Z, R, U, V.
 	/** Note: with a Linux device, the POV hat (if any) will use two axes. These
 	 *  will be included in this count. */
-	u32				Axes;
+	u32 Axes;
 
 	//! An indication of whether the joystick has a POV hat.
 	/** A Windows device will identify the presence or absence or the POV hat.  A

include/IGUIContextMenu.h

@@ -24,7 +24,7 @@ namespace gui
 		//! call setVisible(false)
 		ECMC_HIDE = 2
 
-	 	// note to implementors - this is planned as bitset, so continue with 4 if you need to add further flags.
+		// note to implementors - this is planned as bitset, so continue with 4 if you need to add further flags.
 	};
 
 	//! GUI Context menu interface.
@@ -64,10 +64,10 @@ namespace gui
 		virtual u32 addItem(const wchar_t* text, s32 commandId=-1, bool enabled=true,
 			bool hasSubMenu=false, bool checked=false, bool autoChecking=false) = 0;
 
-        //! Insert a menu item at specified position.
-        /** \param idx: Position to insert the new element,
-        should be smaller than itemcount otherwise the item is added to the end.
-        \param text: Text of menu item. Set this to 0 to create
+		//! Insert a menu item at specified position.
+		/** \param idx: Position to insert the new element,
+		should be smaller than itemcount otherwise the item is added to the end.
+		\param text: Text of menu item. Set this to 0 to create
 		an separator instead of a real item, which is the same like
 		calling addSeparator();
 		\param commandId: Command id of menu item, a simple id you may
@@ -81,11 +81,11 @@ namespace gui
 		virtual u32 insertItem(u32 idx, const wchar_t* text, s32 commandId=-1, bool enabled=true,
 			bool hasSubMenu=false, bool checked=false, bool autoChecking=false) = 0;
 
-		//! Find an item by it's CommandID
+		//! Find an item by its CommandID
 		/**
 		\param commandId: We are looking for the first item which has this commandID
 		\param idxStartSearch: Start searching from this index.
-        \return Returns the index of the item when found or otherwise -1. */
+		\return Returns the index of the item when found or otherwise -1. */
 		virtual s32 findItemWithCommandId(s32 commandId, u32 idxStartSearch=0) const = 0;
 
 		//! Adds a separator item to the menu

include/IGUIEditBox.h

@@ -134,11 +134,11 @@ namespace gui
 		//! Returns maximum amount of characters, previously set by setMax();
 		virtual u32 getMax() const = 0;
 
-		//! Set the character used for the cursor. 
+		//! Set the character used for the cursor.
 		/** By default it's "_" */
 		virtual void setCursorChar(const wchar_t cursorChar) = 0;
 
-		//! Get the character used for the cursor. 
+		//! Get the character used for the cursor.
 		virtual wchar_t getCursorChar() const = 0;
 
 		//! Set the blinktime for the cursor. 2x blinktime is one full cycle.
@@ -146,8 +146,7 @@ namespace gui
 		virtual void setCursorBlinkTime(irr::u32 timeMs) = 0;
 
 		//! Get the cursor blinktime
-		virtual irr::u32 getCursorBlinkTime() const = 0; 
- 
+		virtual irr::u32 getCursorBlinkTime() const = 0;
 	};
 
 

include/IGUIElement.h

@@ -564,7 +564,7 @@ public:
 	virtual bool sendToBack(IGUIElement* child)
 	{
 		core::list<IGUIElement*>::Iterator it = Children.begin();
-		if (child == (*it))	// already there
+		if (child == (*it)) // already there
 			return true;
 		for (; it != Children.end(); ++it)
 		{
@@ -748,7 +748,7 @@ public:
 	{
 		return GUIElementTypeNames[Type];
 	}
-	
+
 	//! Returns the name of the element.
 	/** \return Name as character string. */
 	virtual const c8* getName() const
@@ -778,7 +778,7 @@ public:
 	scripting languages, editors, debuggers or xml serialization purposes. */
 	virtual void serializeAttributes(io::IAttributes* out, io::SAttributeReadWriteOptions* options=0) const
 	{
-		out->addString("Name", Name.c_str());		
+		out->addString("Name", Name.c_str());
 		out->addInt("Id", ID );
 		out->addString("Caption", getText());
 		out->addRect("Rect", DesiredRect);
@@ -1017,7 +1017,7 @@ protected:
 
 	//! tooltip
 	core::stringw ToolTipText;
-	
+
 	//! users can set this for identificating the element by string
 	core::stringc Name;
 

include/IGUIEnvironment.h

@@ -87,8 +87,8 @@ public:
 	virtual IGUIElement* getFocus() const = 0;
 
 	//! Returns the element which was last under the mouse cursor
-	/** NOTE: This information is updated _after_ the user-eventreceiver 
-	received it's mouse-events. To find the hovered element while catching 
+	/** NOTE: This information is updated _after_ the user-eventreceiver
+	received it's mouse-events. To find the hovered element while catching
 	mouse events you have to use instead:
 	IGUIEnvironment::getRootGUIElement()->getElementFromPoint(mousePos);
 	\return Pointer to the element under the mouse. */
@@ -215,7 +215,7 @@ public:
 	//! Returns the root gui element.
 	/** This is the first gui element, the (direct or indirect) parent of all
 	other gui elements. It is a valid IGUIElement, with dimensions the same
-	size as the screen. 
+	size as the screen.
 	\return Pointer to the root element of the GUI. The returned pointer
 	should not be dropped. See IReferenceCounted::drop() for more
 	information. */
@@ -584,8 +584,8 @@ public:
 
 	//! Loads the gui. Note that the current gui is not cleared before.
 	/** When a parent is set the elements will be added below the parent, the parent itself does not deserialize.
-	When the file contains skin-settings from the gui-environment those are always serialized into the 
-	guienvironment independent	of the parent setting.
+	When the file contains skin-settings from the gui-environment those are always serialized into the
+	guienvironment independent of the parent setting.
 	\param filename Name of the file.
 	\param parent Parent for the loaded GUI, root if 0.
 	\return True if loading succeeded, else false. */
@@ -593,8 +593,8 @@ public:
 
 	//! Loads the gui. Note that the current gui is not cleared before.
 	/** When a parent is set the elements will be added below the parent, the parent itself does not deserialize.
-	When the file contains skin-settings from the gui-environment those are always serialized into the 
-	guienvironment independent	of the parent setting.
+	When the file contains skin-settings from the gui-environment those are always serialized into the
+	guienvironment independent of the parent setting.
 	\param file The file to load from.
 	\param parent Parent for the loaded GUI, root if 0.
 	\return True if loading succeeded, else false. */

include/IGUITreeView.h

@@ -88,7 +88,7 @@ namespace gui
 		virtual bool hasChildren() const = 0;
 
 		//! returns true if this node has child nodes
-		/** \deprecated Deprecated in 1.8, use hasChildren() instead. 
+		/** \deprecated Deprecated in 1.8, use hasChildren() instead.
 		This method may be removed by Irrlicht 1.9 */
 		_IRR_DEPRECATED_ bool hasChilds() const
 		{

include/IGUIWindow.h

@@ -62,7 +62,7 @@ namespace gui
 		So to get absolute positions you have to add the resulting rectangle to getAbsolutePosition().UpperLeftCorner.<br>
 		To get it relative to the parent element you have to add the resulting rectangle to getRelativePosition().UpperLeftCorner.
 		Beware that adding a menu will not change the clientRect as menus are own gui elements, so in that case you might want to subtract
-		the menu area additionally.	*/
+		the menu area additionally. */
 		virtual core::rect<s32> getClientRect() const = 0;
 	};
 

include/IMeshCache.h

@@ -103,7 +103,7 @@ namespace scene
 		}
 
 		//! Renames a loaded mesh.
-		/**	\deprecated Use renameMesh() instead. This method may be removed by
+		/** \deprecated Use renameMesh() instead. This method may be removed by
 		Irrlicht 1.9 */
 		_IRR_DEPRECATED_ bool setMeshFilename(u32 index, const io::path& filename)
 		{
@@ -125,12 +125,12 @@ namespace scene
 
 		//! Get the name of a loaded mesh, based on its index.
 		/** \param index: Index of the mesh, number between 0 and getMeshCount()-1.
-		\return The name if mesh was found and has a name, else	the path is empty. */
+		\return The name if mesh was found and has a name, else the path is empty. */
 		virtual const io::SNamedPath& getMeshName(u32 index) const = 0;
 
 		//! Get the name of the loaded mesh if there is any.
 		/** \param mesh Pointer to mesh to query.
-		\return The name if mesh was found and has a name, else	the path is empty. */
+		\return The name if mesh was found and has a name, else the path is empty. */
 		virtual const io::SNamedPath& getMeshName(const IMesh* const mesh) const = 0;
 
 		//! Renames a loaded mesh.

include/IMeshManipulator.h

@@ -119,7 +119,7 @@ namespace scene
 		}
 
 		//! Scales the actual mesh, not a scene node.
-		/** \deprecated Use scale() instead. This method may be removed by Irrlicht 1.9 
+		/** \deprecated Use scale() instead. This method may be removed by Irrlicht 1.9
 		\param mesh Mesh on which the operation is performed.
 		\param factor Scale factor for each axis. */
 		_IRR_DEPRECATED_ void scaleMesh(IMesh* mesh, const core::vector3df& factor) const {return scale(mesh,factor);}
@@ -159,7 +159,7 @@ namespace scene
 		}
 
 		//! Applies a transformation to a mesh
-		/** \deprecated Use transform() instead. This method may be removed by Irrlicht 1.9 
+		/** \deprecated Use transform() instead. This method may be removed by Irrlicht 1.9
 		\param mesh Mesh on which the operation is performed.
 		\param m transformation matrix. */
 		_IRR_DEPRECATED_ virtual void transformMesh(IMesh* mesh, const core::matrix4& m) const {return transform(mesh,m);}

include/IParticleEmitter.h

@@ -81,7 +81,7 @@ public:
 	//! Set the maximum particle life-time in milliseconds
 	virtual void setMaxLifeTime( u32 lifeTimeMax ) = 0;
 
-	//!	Set maximal random derivation from the direction
+	//! Set maximal random derivation from the direction
 	virtual void setMaxAngleDegrees( s32 maxAngleDegrees ) = 0;
 
 	//! Get direction the emitter emits particles
@@ -111,10 +111,9 @@ public:
 	//! Get the maximum particle life-time in milliseconds
 	virtual u32 getMaxLifeTime() const = 0;
 
-	//!	Get maximal random derivation from the direction
+	//! Get maximal random derivation from the direction
 	virtual s32 getMaxAngleDegrees() const = 0;
 
-
 	//! Get emitter type
 	virtual E_PARTICLE_EMITTER_TYPE getType() const { return EPET_POINT; }
 };

include/IParticleSystemSceneNode.h

@@ -68,8 +68,9 @@ public:
 	virtual void clearParticles() = 0;
 
 	//! Do manually update the particles.
- 	//! This should only be called when you want to render the node outside the scenegraph,
- 	//! as the node will care about this otherwise automatically.
+	/** This should only be called when you want to render the node outside
+	the scenegraph, as the node will care about this otherwise
+	automatically. */
 	virtual void doParticleSystem(u32 time) = 0;
 
 	//! Gets the particle emitter, which creates the particles.

include/IQ3Shader.h

@@ -371,50 +371,48 @@ namespace quake3
 
 	enum eQ3ModifierFunction
 	{
-		TCMOD				= 0,
+		TCMOD			= 0,
 		DEFORMVERTEXES		= 1,
-		RGBGEN				= 2,
-		TCGEN				= 3,
-		MAP					= 4,
-		ALPHAGEN			= 5,
-
-		FUNCTION2			= 0x10,
-		SCROLL				= FUNCTION2 + 1,
-		SCALE				= FUNCTION2 + 2,
-		ROTATE				= FUNCTION2 + 3,
-		STRETCH				= FUNCTION2 + 4,
-		TURBULENCE			= FUNCTION2 + 5,
-		WAVE				= FUNCTION2 + 6,
-
-		IDENTITY			= FUNCTION2 + 7,
-		VERTEX				= FUNCTION2 + 8,
-		TEXTURE				= FUNCTION2 + 9,
-		LIGHTMAP			= FUNCTION2 + 10,
-		ENVIRONMENT			= FUNCTION2 + 11,
+		RGBGEN			= 2,
+		TCGEN			= 3,
+		MAP			= 4,
+		ALPHAGEN		= 5,
+
+		FUNCTION2		= 0x10,
+		SCROLL			= FUNCTION2 + 1,
+		SCALE			= FUNCTION2 + 2,
+		ROTATE			= FUNCTION2 + 3,
+		STRETCH			= FUNCTION2 + 4,
+		TURBULENCE		= FUNCTION2 + 5,
+		WAVE			= FUNCTION2 + 6,
+
+		IDENTITY		= FUNCTION2 + 7,
+		VERTEX			= FUNCTION2 + 8,
+		TEXTURE			= FUNCTION2 + 9,
+		LIGHTMAP		= FUNCTION2 + 10,
+		ENVIRONMENT		= FUNCTION2 + 11,
 		DOLLAR_LIGHTMAP		= FUNCTION2 + 12,
-		BULGE				= FUNCTION2 + 13,
-		AUTOSPRITE			= FUNCTION2 + 14,
-		AUTOSPRITE2			= FUNCTION2 + 15,
-		TRANSFORM			= FUNCTION2 + 16,
-		EXACTVERTEX			= FUNCTION2 + 17,
-		CONSTANT			= FUNCTION2 + 18,
+		BULGE			= FUNCTION2 + 13,
+		AUTOSPRITE		= FUNCTION2 + 14,
+		AUTOSPRITE2		= FUNCTION2 + 15,
+		TRANSFORM		= FUNCTION2 + 16,
+		EXACTVERTEX		= FUNCTION2 + 17,
+		CONSTANT		= FUNCTION2 + 18,
 		LIGHTINGSPECULAR	= FUNCTION2 + 19,
-		MOVE				= FUNCTION2 + 20,
-		NORMAL				= FUNCTION2 + 21,
+		MOVE			= FUNCTION2 + 20,
+		NORMAL			= FUNCTION2 + 21,
 		IDENTITYLIGHTING	= FUNCTION2 + 22,
 
 		WAVE_MODIFIER_FUNCTION	= 0x30,
-		SINUS				= WAVE_MODIFIER_FUNCTION + 1,
-		COSINUS				= WAVE_MODIFIER_FUNCTION + 2,
-		SQUARE				= WAVE_MODIFIER_FUNCTION + 3,
-		TRIANGLE			= WAVE_MODIFIER_FUNCTION + 4,
-		SAWTOOTH			= WAVE_MODIFIER_FUNCTION + 5,
+		SINUS			= WAVE_MODIFIER_FUNCTION + 1,
+		COSINUS			= WAVE_MODIFIER_FUNCTION + 2,
+		SQUARE			= WAVE_MODIFIER_FUNCTION + 3,
+		TRIANGLE		= WAVE_MODIFIER_FUNCTION + 4,
+		SAWTOOTH		= WAVE_MODIFIER_FUNCTION + 5,
 		SAWTOOTH_INVERSE	= WAVE_MODIFIER_FUNCTION + 6,
-		NOISE				= WAVE_MODIFIER_FUNCTION + 7,
-
-
-		UNKNOWN				= -2
+		NOISE			= WAVE_MODIFIER_FUNCTION + 7,
 
+		UNKNOWN			= -2
 	};
 
 	struct SModifierFunction

include/IReferenceCounted.h

@@ -9,7 +9,7 @@
 
 #ifdef _IRR_COMPILE_WITH_LEAK_HUNTER_
 	#include "leakHunter.h"
-#endif 
+#endif
 
 namespace irr
 {

include/ISceneNode.h

@@ -702,17 +702,17 @@ namespace scene
 		{
 			if (!out)
 				return;
-			out->addString	("Name", Name.c_str());
-			out->addInt	("Id", ID );
+			out->addString("Name", Name.c_str());
+			out->addInt("Id", ID );
 
 			out->addVector3d("Position", getPosition() );
 			out->addVector3d("Rotation", getRotation() );
 			out->addVector3d("Scale", getScale() );
 
-			out->addBool	("Visible", IsVisible );
-			out->addInt	("AutomaticCulling", AutomaticCullingState);
-			out->addInt	("DebugDataVisible", DebugDataVisible );
-			out->addBool	("IsDebugObject", IsDebugObject );
+			out->addBool("Visible", IsVisible );
+			out->addInt("AutomaticCulling", AutomaticCullingState);
+			out->addInt("DebugDataVisible", DebugDataVisible );
+			out->addBool("IsDebugObject", IsDebugObject );
 		}
 
 

include/ISceneNodeAnimatorCameraFPS.h

@@ -18,7 +18,7 @@ namespace scene
 
 	//! Special scene node animator for FPS cameras
 	/** This scene node animator can be attached to a camera to make it act
-	like a first person shooter 
+	like a first person shooter
 	*/
 	class ISceneNodeAnimatorCameraFPS : public ISceneNodeAnimator
 	{
@@ -45,15 +45,15 @@ namespace scene
 		virtual void setKeyMap(SKeyMap *map, u32 count) = 0;
 
 		//! Sets the keyboard mapping for this animator
-		//!	\param keymap The new keymap array 
+		//! \param keymap The new keymap array
 		virtual void setKeyMap(const core::array<SKeyMap>& keymap) = 0;
 
 		//! Gets the keyboard mapping for this animator
 		virtual const core::array<SKeyMap>& getKeyMap() const = 0;
 
 		//! Sets whether vertical movement should be allowed.
-		/** If vertical movement is enabled then the camera may fight with 
-		gravity causing camera shake. Disable this if the camera has 
+		/** If vertical movement is enabled then the camera may fight with
+		gravity causing camera shake. Disable this if the camera has
 		a collision animator with gravity enabled. */
 		virtual void setVerticalMovement(bool allow) = 0;
 

include/ISceneUserDataSerializer.h

@@ -29,7 +29,7 @@ public:
 
 	//! Called when the scene manager create a scene node while loading a file.
 	virtual void OnCreateNode(ISceneNode* node) = 0;
-	
+
 	//! Called when the scene manager read a scene node while loading a file.
 	/** The userData pointer contains a list of attributes with userData which
 	were attached to the scene node in the read scene file.*/

include/ITerrainSceneNode.h

@@ -152,7 +152,7 @@ namespace scene
 		\param file The file to read the image from. File is not rewinded.
 		\param vertexColor Color of all vertices.
 		\param smoothFactor Number of smoothing passes. */
-		virtual bool loadHeightMap(io::IReadFile* file, 
+		virtual bool loadHeightMap(io::IReadFile* file,
 			video::SColor vertexColor=video::SColor(255,255,255,255),
 			s32 smoothFactor=0) =0;
 

include/ITimer.h

@@ -51,7 +51,7 @@ public:
 		// Day of the year, from 1 to 366
 		u32 Yearday;
 		// Whether daylight saving is on
-		bool IsDST;		
+		bool IsDST;
 	};
 
 	virtual RealTimeDate getRealTimeAndDate() const = 0;

include/IXMLWriter.h

@@ -15,7 +15,7 @@ namespace io
 {
 
 	//! Interface providing methods for making it easier to write XML files.
-	/** This XML Writer writes xml files using in the platform dependent 
+	/** This XML Writer writes xml files using in the platform dependent
 	wchar_t format and sets the xml-encoding correspondingly. */
 	class IXMLWriter : public virtual IReferenceCounted
 	{

include/IrrCompileConfig.h

@@ -161,7 +161,7 @@ If not defined, Windows Multimedia library is used, which offers also broad supp
 #undef _IRR_COMPILE_WITH_DIRECTINPUT_JOYSTICK_
 #endif
 // can't get this to compile currently under borland, can be removed if someone has a better solution
-#if defined(__BORLANDC__)	
+#if defined(__BORLANDC__)
 #undef _IRR_COMPILE_WITH_DIRECTINPUT_JOYSTICK_
 #endif
 
@@ -391,7 +391,7 @@ B3D, MS3D or X meshes */
 #ifdef NO_IRR_COMPILE_WITH_OGRE_LOADER_
 #undef _IRR_COMPILE_WITH_OGRE_LOADER_
 #endif
-#endif	// _IRR_COMPILE_WITH_SKINNED_MESH_SUPPORT_
+#endif // _IRR_COMPILE_WITH_SKINNED_MESH_SUPPORT_
 
 //! Define _IRR_COMPILE_WITH_IRR_MESH_LOADER_ if you want to load Irrlicht Engine .irrmesh files
 #define _IRR_COMPILE_WITH_IRR_MESH_LOADER_
@@ -845,7 +845,6 @@ precision will be lower but speed higher. currently X86 only
 		#define _tfindnext   __tfindnext
 		typedef long intptr_t;
 	#endif
-    
 #endif
 
 #endif // __IRR_COMPILE_CONFIG_H_INCLUDED__

include/SColor.h

@@ -429,14 +429,14 @@ namespace video
 				{
 					u16 * dest = (u16*)data;
 					*dest = video::A8R8G8B8toA1R5G5B5( color );
-				} 
+				}
 				break;
 
 				case ECF_R5G6B5:
 				{
 					u16 * dest = (u16*)data;
 					*dest = video::A8R8G8B8toR5G6B5( color );
-				} 
+				}
 				break;
 
 				case ECF_R8G8B8:
@@ -445,14 +445,14 @@ namespace video
 					dest[0] = (u8)getRed();
 					dest[1] = (u8)getGreen();
 					dest[2] = (u8)getBlue();
-				} 
+				}
 				break;
 
 				case ECF_A8R8G8B8:
 				{
 					u32 * dest = (u32*)data;
 					*dest = color;
-				} 
+				}
 				break;
 
 				default:

include/SMaterial.h

@@ -22,15 +22,15 @@ namespace video
 	//! Flag for EMT_ONETEXTURE_BLEND, ( BlendFactor ) BlendFunc = source * sourceFactor + dest * destFactor
 	enum E_BLEND_FACTOR
 	{
-		EBF_ZERO	= 0,			//!< src & dest	(0, 0, 0, 0)
-		EBF_ONE,					//!< src & dest	(1, 1, 1, 1)
-		EBF_DST_COLOR, 				//!< src	(destR, destG, destB, destA)
+		EBF_ZERO	= 0,		//!< src & dest	(0, 0, 0, 0)
+		EBF_ONE,			//!< src & dest	(1, 1, 1, 1)
+		EBF_DST_COLOR,			//!< src	(destR, destG, destB, destA)
 		EBF_ONE_MINUS_DST_COLOR,	//!< src	(1-destR, 1-destG, 1-destB, 1-destA)
-		EBF_SRC_COLOR,				//!< dest	(srcR, srcG, srcB, srcA)
-		EBF_ONE_MINUS_SRC_COLOR, 	//!< dest	(1-srcR, 1-srcG, 1-srcB, 1-srcA)
-		EBF_SRC_ALPHA,				//!< src & dest	(srcA, srcA, srcA, srcA)
+		EBF_SRC_COLOR,			//!< dest	(srcR, srcG, srcB, srcA)
+		EBF_ONE_MINUS_SRC_COLOR,	//!< dest	(1-srcR, 1-srcG, 1-srcB, 1-srcA)
+		EBF_SRC_ALPHA,			//!< src & dest	(srcA, srcA, srcA, srcA)
 		EBF_ONE_MINUS_SRC_ALPHA,	//!< src & dest	(1-srcA, 1-srcA, 1-srcA, 1-srcA)
-		EBF_DST_ALPHA,				//!< src & dest	(destA, destA, destA, destA)
+		EBF_DST_ALPHA,			//!< src & dest	(destA, destA, destA, destA)
 		EBF_ONE_MINUS_DST_ALPHA,	//!< src & dest	(1-destA, 1-destA, 1-destA, 1-destA)
 		EBF_SRC_ALPHA_SATURATE		//!< src	(min(srcA, 1-destA), idem, ...)
 	};
@@ -39,11 +39,11 @@ namespace video
 	enum E_BLEND_OPERATION
 	{
 		EBO_NONE = 0,	//!< No blending happens
-		EBO_ADD,		//!< Default blending adds the color values
+		EBO_ADD,	//!< Default blending adds the color values
 		EBO_SUBTRACT,	//!< This mode subtracts the color values
 		EBO_REVSUBTRACT,//!< This modes subtracts destination from source
-		EBO_MIN,		//!< Choose minimum value of each color channel
-		EBO_MAX,		//!< Choose maximum value of each color channel
+		EBO_MIN,	//!< Choose minimum value of each color channel
+		EBO_MAX,	//!< Choose maximum value of each color channel
 		EBO_MIN_FACTOR,	//!< Choose minimum value of each color channel after applying blend factors, not widely supported
 		EBO_MAX_FACTOR,	//!< Choose maximum value of each color channel after applying blend factors, not widely supported
 		EBO_MIN_ALPHA,	//!< Choose minimum value of each color channel based on alpha value, not widely supported
@@ -128,7 +128,7 @@ namespace video
 	{
 		const u32 state = IR(param);
 		alphaSource = (state & 0x0000F000) >> 12;
-		modulo	= E_MODULATE_FUNC( ( state & 0x00000F00 ) >> 8 );
+		modulo = E_MODULATE_FUNC( ( state & 0x00000F00 ) >> 8 );
 		srcFact = E_BLEND_FACTOR ( ( state & 0x000000F0 ) >> 4 );
 		dstFact = E_BLEND_FACTOR ( ( state & 0x0000000F ) );
 	}
@@ -370,7 +370,7 @@ namespace video
 		u8 ZBuffer;
 
 		//! Sets the antialiasing mode
-		/** Values are chosen from E_ANTI_ALIASING_MODE. Default is 
+		/** Values are chosen from E_ANTI_ALIASING_MODE. Default is
 		EAAM_SIMPLE|EAAM_LINE_SMOOTH, i.e. simple multi-sample
 		anti-aliasing and lime smoothing is enabled. */
 		u8 AntiAliasing;
@@ -384,7 +384,7 @@ namespace video
 
 		//! Defines the interpretation of vertex color in the lighting equation
 		/** Values should be chosen from E_COLOR_MATERIAL.
-		When lighting is enabled, vertex color can be used instead of the 
+		When lighting is enabled, vertex color can be used instead of the
 		material values for light modulation. This allows to easily change e.g. the
 		diffuse light behavior of each face. The default, ECM_DIFFUSE, will result in
 		a very similar rendering as with lighting turned off, just with light shading. */

include/SMaterialLayer.h

@@ -73,7 +73,7 @@ namespace video
 		~SMaterialLayer()
 		{
 			MatrixAllocator.destruct(TextureMatrix);
-			MatrixAllocator.deallocate(TextureMatrix); 
+			MatrixAllocator.deallocate(TextureMatrix);
 		}
 
 		//! Assignment operator
@@ -93,7 +93,7 @@ namespace video
 				else
 				{
 					MatrixAllocator.destruct(TextureMatrix);
-					MatrixAllocator.deallocate(TextureMatrix); 
+					MatrixAllocator.deallocate(TextureMatrix);
 					TextureMatrix = 0;
 				}
 			}
@@ -200,8 +200,8 @@ namespace video
 		/** In Irrlicht you can use anisotropic texture filtering
 		in conjunction with bilinear or trilinear texture
 		filtering to improve rendering results. Primitives
-		will look less blurry with this flag switched on. The number gives 
-		the maximal anisotropy degree, and is often in the range 2-16. 
+		will look less blurry with this flag switched on. The number gives
+		the maximal anisotropy degree, and is often in the range 2-16.
 		Value 1 is equivalent to 0, but should be avoided. */
 		u8 AnisotropicFilter;
 

include/coreutil.h

@@ -20,27 +20,26 @@ namespace core
 // ----------- some basic quite often used string functions -----------------
 
 //! search if a filename has a proper extension
-inline s32 isFileExtension (	const io::path& filename,
-								const io::path& ext0,
-								const io::path& ext1,
-								const io::path& ext2)
+inline s32 isFileExtension (const io::path& filename, const io::path& ext0,
+				const io::path& ext1, const io::path& ext2)
 {
 	s32 extPos = filename.findLast ( '.' );
 	if ( extPos < 0 )
 		return 0;
 
 	extPos += 1;
-	if ( filename.equals_substring_ignore_case ( ext0, extPos ) ) return 1;
-	if ( filename.equals_substring_ignore_case ( ext1, extPos ) ) return 2;
-	if ( filename.equals_substring_ignore_case ( ext2, extPos ) ) return 3;
+	if ( filename.equals_substring_ignore_case ( ext0, extPos ) )
+		return 1;
+	if ( filename.equals_substring_ignore_case ( ext1, extPos ) )
+		return 2;
+	if ( filename.equals_substring_ignore_case ( ext2, extPos ) )
+		return 3;
 	return 0;
 }
 
 //! search if a filename has a proper extension
-inline bool hasFileExtension (	const io::path& filename,
-								const io::path& ext0,
-								const io::path& ext1 = "",
-								const io::path& ext2 = "")
+inline bool hasFileExtension(const io::path& filename, const io::path& ext0,
+				const io::path& ext1 = "", const io::path& ext2 = "")
 {
 	return isFileExtension ( filename, ext0, ext1, ext2 ) > 0;
 }

include/fast_atof.h

@@ -13,8 +13,8 @@ namespace irr
 namespace core
 {
 	//! Selection of characters which count as decimal point in fast_atof
-	// TODO: This should probably also be used in irr::core::string, but the float-to-string code
-	//		used there has to be rewritten first.
+	// TODO: This should probably also be used in irr::core::string, but
+	// the float-to-string code used there has to be rewritten first.
 	IRRLICHT_API extern irr::core::stringc LOCALE_DECIMAL_POINTS;
 
 // we write [17] here instead of [] to work around a swig bug

include/irrArray.h

@@ -25,8 +25,7 @@ class array
 public:
 
 	//! Default constructor for empty array.
-	array()
-		: data(0), allocated(0), used(0),
+	array() : data(0), allocated(0), used(0),
 			strategy(ALLOC_STRATEGY_DOUBLE), free_when_destroyed(true), is_sorted(true)
 	{
 	}
@@ -34,9 +33,9 @@ public:
 
 	//! Constructs an array and allocates an initial chunk of memory.
 	/** \param start_count Amount of elements to pre-allocate. */
-	array(u32 start_count)
-      : data(0), allocated(0), used(0),
-        strategy(ALLOC_STRATEGY_DOUBLE), free_when_destroyed(true), is_sorted(true)
+	array(u32 start_count) : data(0), allocated(0), used(0),
+			strategy(ALLOC_STRATEGY_DOUBLE),
+			free_when_destroyed(true), is_sorted(true)
 	{
 		reallocate(start_count);
 	}
@@ -468,8 +467,8 @@ public:
 	//! it is used for searching a multiset
 	/** The array will be sorted before the binary search if it is not
 	already sorted.
-	\param element	Element to search for.
-	\param &last	return lastIndex of equal elements
+	\param element Element to search for.
+	\param &last return lastIndex of equal elements
 	\return Position of the first searched element if it was found,
 	otherwise -1 is returned. */
 	s32 binary_search_multi(const T& element, s32 &last)
@@ -567,12 +566,12 @@ public:
 
 		for (i=index+count; i<used; ++i)
 		{
-			if (i-count >= index+count)	// not already destructed before loop
+			if (i-count >= index+count) // not already destructed before loop
 				allocator.destruct(&data[i-count]);
 
 			allocator.construct(&data[i-count], data[i]); // data[i-count] = data[i];
 
-			if (i >= used-count)	// those which are not overwritten
+			if (i >= used-count) // those which are not overwritten
 				allocator.destruct(&data[i]);
 		}
 
@@ -590,14 +589,14 @@ public:
 	//! Swap the content of this array container with the content of another array
 	/** Afterwards this object will contain the content of the other object and the other
 	object will contain the content of this object.
-	\param other Swap content with this object	*/
+	\param other Swap content with this object */
 	void swap(array<T, TAlloc>& other)
 	{
 		core::swap(data, other.data);
 		core::swap(allocated, other.allocated);
 		core::swap(used, other.used);
-		core::swap(allocator, other.allocator);	// memory is still released by the same allocator used for allocation
-		eAllocStrategy helper_strategy(strategy);	// can't use core::swap with bitfields
+		core::swap(allocator, other.allocator); // memory is still released by the same allocator used for allocation
+		eAllocStrategy helper_strategy(strategy); // can't use core::swap with bitfields
 		strategy = other.strategy;
 		other.strategy = helper_strategy;
 		bool helper_free_when_destroyed(free_when_destroyed);

include/irrList.h

@@ -389,13 +389,13 @@ public:
 	/** Afterwards this object will contain the content of the other object and the other
 	object will contain the content of this object. Iterators will afterwards be valid for
 	the swapped object.
-	\param other Swap content with this object	*/
+	\param other Swap content with this object */
 	void swap(list<T>& other)
 	{
 		core::swap(First, other.First);
 		core::swap(Last, other.Last);
 		core::swap(Size, other.Size);
-		core::swap(allocator, other.allocator);	// memory is still released by the same allocator used for allocation
+		core::swap(allocator, other.allocator); // memory is still released by the same allocator used for allocation
 	}
 
 

include/irrMap.h

@@ -41,16 +41,16 @@ class map
 				p->setParent(this);
 		}
 
-		void setParent(RBTree* p)		{ Parent=p; }
+		void setParent(RBTree* p) { Parent=p; }
 
-		void setValue(const ValueTypeRB& v)	{ Value = v; }
+		void setValue(const ValueTypeRB& v) { Value = v; }
 
-		void setRed()			{ IsRed = true; }
-		void setBlack()			{ IsRed = false; }
+		void setRed() { IsRed = true; }
+		void setBlack() { IsRed = false; }
 
-		RBTree* getLeftChild() const	{ return LeftChild; }
-		RBTree* getRightChild() const	{ return RightChild; }
-		RBTree* getParent() const		{ return Parent; }
+		RBTree* getLeftChild() const { return LeftChild; }
+		RBTree* getRightChild() const { return RightChild; }
+		RBTree* getParent() const { return Parent; }
 
 		const ValueTypeRB& getValue() const
 		{
@@ -118,13 +118,13 @@ class map
 	private:
 		RBTree();
 
-		RBTree*		LeftChild;
-		RBTree*		RightChild;
+		RBTree* LeftChild;
+		RBTree* RightChild;
 
-		RBTree*		Parent;
+		RBTree* Parent;
 
-		KeyTypeRB	Key;
-		ValueTypeRB	Value;
+		KeyTypeRB Key;
+		ValueTypeRB Value;
 
 		bool IsRed;
 	}; // RBTree
@@ -442,7 +442,7 @@ class map
 	{
 	public:
 
-	ParentFirstIterator() : Root(0), Cur(0)	{}
+	ParentFirstIterator() : Root(0), Cur(0) {}
 
 	explicit ParentFirstIterator(Node* root) : Root(root), Cur(0)
 	{
@@ -938,7 +938,7 @@ class map
 	/** Afterwards this object will contain the content of the other object and the other
 	object will contain the content of this object. Iterators will afterwards be valid for
 	the swapped object.
-	\param other Swap content with this object	*/
+	\param other Swap content with this object */
 	void swap(map<KeyType, ValueType>& other)
 	{
 		core::swap(Root, other.Root);

include/irrMath.h

@@ -53,19 +53,19 @@ namespace core
 #undef PI
 #endif
 	//! Constant for PI.
-	const f32 PI		= 3.14159265359f;
+	const f32 PI = 3.14159265359f;
 
 	//! Constant for reciprocal of PI.
-	const f32 RECIPROCAL_PI	= 1.0f/PI;
+	const f32 RECIPROCAL_PI = 1.0f/PI;
 
 	//! Constant for half of PI.
-	const f32 HALF_PI	= PI/2.0f;
+	const f32 HALF_PI = PI/2.0f;
 
 #ifdef PI64 // make sure we don't collide with a define
 #undef PI64
 #endif
 	//! Constant for 64bit PI.
-	const f64 PI64		= 3.1415926535897932384626433832795028841971693993751;
+	const f64 PI64 = 3.1415926535897932384626433832795028841971693993751;
 
 	//! Constant for 64bit reciprocal of PI.
 	const f64 RECIPROCAL_PI64 = 1.0/PI64;
@@ -84,7 +84,7 @@ namespace core
 
 	//! Utility function to convert a radian value to degrees
 	/** Provided as it can be clearer to write radToDeg(X) than RADTODEG * X
-	\param radians	The radians value to convert to degrees.
+	\param radians The radians value to convert to degrees.
 	*/
 	inline f32 radToDeg(f32 radians)
 	{
@@ -93,7 +93,7 @@ namespace core
 
 	//! Utility function to convert a radian value to degrees
 	/** Provided as it can be clearer to write radToDeg(X) than RADTODEG * X
-	\param radians	The radians value to convert to degrees.
+	\param radians The radians value to convert to degrees.
 	*/
 	inline f64 radToDeg(f64 radians)
 	{
@@ -102,7 +102,7 @@ namespace core
 
 	//! Utility function to convert a degrees value to radians
 	/** Provided as it can be clearer to write degToRad(X) than DEGTORAD * X
-	\param degrees	The degrees value to convert to radians.
+	\param degrees The degrees value to convert to radians.
 	*/
 	inline f32 degToRad(f32 degrees)
 	{
@@ -111,7 +111,7 @@ namespace core
 
 	//! Utility function to convert a degrees value to radians
 	/** Provided as it can be clearer to write degToRad(X) than DEGTORAD * X
-	\param degrees	The degrees value to convert to radians.
+	\param degrees The degrees value to convert to radians.
 	*/
 	inline f64 degToRad(f64 degrees)
 	{
@@ -348,26 +348,26 @@ namespace core
 	//! code is taken from IceFPU
 	//! Integer representation of a floating-point value.
 #ifdef IRRLICHT_FAST_MATH
-	#define IR(x)                           ((u32&)(x))
+	#define IR(x)			((u32&)(x))
 #else
 	inline u32 IR(f32 x) {inttofloat tmp; tmp.f=x; return tmp.u;}
 #endif
 
 	//! Absolute integer representation of a floating-point value
-	#define AIR(x)				(IR(x)&0x7fffffff)
+	#define AIR(x)			(IR(x)&0x7fffffff)
 
 	//! Floating-point representation of an integer value.
 #ifdef IRRLICHT_FAST_MATH
-	#define FR(x)                           ((f32&)(x))
+	#define FR(x)			((f32&)(x))
 #else
 	inline f32 FR(u32 x) {inttofloat tmp; tmp.u=x; return tmp.f;}
 	inline f32 FR(s32 x) {inttofloat tmp; tmp.s=x; return tmp.f;}
 #endif
 
 	//! integer representation of 1.0
-	#define IEEE_1_0			0x3f800000
+	#define IEEE_1_0		0x3f800000
 	//! integer representation of 255.0
-	#define IEEE_255_0			0x437f0000
+	#define IEEE_255_0		0x437f0000
 
 #ifdef IRRLICHT_FAST_MATH
 	#define	F32_LOWER_0(f)		(F32_AS_U32(f) >  F32_SIGN_BIT)

include/irrTypes.h

@@ -74,7 +74,7 @@ typedef signed int		s32;
 typedef unsigned __int64			u64;
 #elif __GNUC__
 #if __WORDSIZE == 64
-typedef unsigned long int 			u64;
+typedef unsigned long int			u64;
 #else
 __extension__ typedef unsigned long long	u64;
 #endif
@@ -88,7 +88,7 @@ typedef unsigned long long			u64;
 typedef __int64					s64;
 #elif __GNUC__
 #if __WORDSIZE == 64
-typedef long int 				s64;
+typedef long int				s64;
 #else
 __extension__ typedef long long			s64;
 #endif
@@ -164,18 +164,18 @@ strings
 //! define a break macro for debugging.
 #if defined(_DEBUG)
 #if defined(_IRR_WINDOWS_API_) && defined(_MSC_VER) && !defined (_WIN32_WCE)
-  #if defined(WIN64) || defined(_WIN64) // using portable common solution for x64 configuration
-  #include <crtdbg.h>
-  #define _IRR_DEBUG_BREAK_IF( _CONDITION_ ) if (_CONDITION_) {_CrtDbgBreak();}
-  #else
-  #define _IRR_DEBUG_BREAK_IF( _CONDITION_ ) if (_CONDITION_) {_asm int 3}
-  #endif
+#if defined(WIN64) || defined(_WIN64) // using portable common solution for x64 configuration
+	#include <crtdbg.h>
+	#define _IRR_DEBUG_BREAK_IF( _CONDITION_ ) if (_CONDITION_) {_CrtDbgBreak();}
+#else
+	#define _IRR_DEBUG_BREAK_IF( _CONDITION_ ) if (_CONDITION_) {_asm int 3}
+#endif
 #else
-#include "assert.h"
-#define _IRR_DEBUG_BREAK_IF( _CONDITION_ ) assert( !(_CONDITION_) );
+	#include "assert.h"
+	#define _IRR_DEBUG_BREAK_IF( _CONDITION_ ) assert( !(_CONDITION_) );
 #endif
 #else
-#define _IRR_DEBUG_BREAK_IF( _CONDITION_ )
+	#define _IRR_DEBUG_BREAK_IF( _CONDITION_ )
 #endif
 
 //! Defines a deprecated macro which generates a warning at compile time

include/irrXML.h

@@ -381,7 +381,7 @@ namespace io
 		xmlChar<T>(unsigned short in) : c(static_cast<T>(in)) {}
 		xmlChar<T>(unsigned int in) : c(static_cast<T>(in)) {}
 		xmlChar<T>(unsigned long in) : c(static_cast<T>(in)) {}
-#else 
+#else
 		explicit xmlChar<T>(unsigned char in) : c(static_cast<T>(in)) {}
 		explicit xmlChar<T>(unsigned short in) : c(static_cast<T>(in)) {}
 		explicit xmlChar<T>(unsigned int in) : c(static_cast<T>(in)) {}

include/leakHunter.h

@@ -13,40 +13,40 @@
 namespace irr
 {
 	class IReferenceCounted;
-	
+
 	//! A calls helping to find unrelease objects of type IReferenceCounted.
 	/** To use this you have recompile Irrlicht with _IRR_COMPILE_WITH_LEAK_HUNTER_.
-		Note that this will slow down your application and should only be used for debugging. 
+		Note that this will slow down your application and should only be used for debugging.
 		The way to use is that you can check after you closed and dropped your last Irrlicht device
 		if there are still any IReferenceCounted left over which have not been deleted.
 	*/
-	class LeakHunter 
+	class LeakHunter
 	{
 		public:
 			friend class IReferenceCounted;
-			
+
 			//! Clear all IReferenceCounted objects inside LeakHunter
-			/** This does not affect the IReferenceCounted themselfes only the 
-				counting of them. Usually you don't ever need to clear, but 
-				sometimes it helps when for example you want for to ignore 
+			/** This does not affect the IReferenceCounted themselfes only the
+				counting of them. Usually you don't ever need to clear, but
+				sometimes it helps when for example you want for to ignore
 				certain leaks.
 			*/
-			static void clearReferenceCountedObjects() 
+			static void clearReferenceCountedObjects()
 			{
 				ReferenceCountedObjects.clear();
 			}
-			
+
 			static inline irr::core::array<const IReferenceCounted*> getReferenceCountedObjects()
 			{
-				return ReferenceCountedObjects; 
+				return ReferenceCountedObjects;
 			}
-			
-		protected:			
+
+		protected:
 			static inline void addObject(const IReferenceCounted* object)
 			{
 				ReferenceCountedObjects.push_back(object);
 			}
-			
+
 			static inline void removeObject(const IReferenceCounted* object)
 			{
 				irr::s32 idx = ReferenceCountedObjects.linear_search(object );
@@ -56,10 +56,10 @@ namespace irr
 					ReferenceCountedObjects.erase( ReferenceCountedObjects.size()-1 );
 				}
 			}
-		
+
 		private:
 			// NOTE: We don't do additional grab()/drop()'s here as we want to supervise reference counted objects and not affect them otherwise.
-			IRRLICHT_API static irr::core::array<const IReferenceCounted*> ReferenceCountedObjects; 
+			IRRLICHT_API static irr::core::array<const IReferenceCounted*> ReferenceCountedObjects;
 	};
 } // end namespace irr
 

include/line2d.h

@@ -218,7 +218,7 @@ class line2d
 			vector2d<f64> c((f64)(point.X-start.X), (f64)(point.Y- start.Y));
 			vector2d<f64> v((f64)(end.X-start.X), (f64)(end.Y-start.Y));
 			f64 d = v.getLength();
-			if ( d == 0 )	// can't tell much when the line is just a single point
+			if ( d == 0 ) // can't tell much when the line is just a single point
 				return start;
 			v /= d;
 			f64 t = v.dotProduct(c);
@@ -246,7 +246,7 @@ class line2d
 		vector2df c = point - start;
 		vector2df v = end - start;
 		f32 d = (f32)v.getLength();
-		if ( d == 0 )	// can't tell much when the line is just a single point
+		if ( d == 0 ) // can't tell much when the line is just a single point
 			return start;
 		v /= d;
 		f32 t = v.dotProduct(c);

include/matrix4.h

@@ -947,18 +947,18 @@ namespace core
 	template <class T>
 	inline CMatrix4<T>& CMatrix4<T>::setRotationAxisRadians( const T& angle, const vector3d<T>& axis )
 	{
- 		const f64 c = cos(angle);
+		const f64 c = cos(angle);
 		const f64 s = sin(angle);
 		const f64 t = 1.0 - c;
 
 		const f64 tx  = t * axis.X;
-		const f64 ty  = t * axis.Y;		
+		const f64 ty  = t * axis.Y;
 		const f64 tz  = t * axis.Z;
 
 		const f64 sx  = s * axis.X;
 		const f64 sy  = s * axis.Y;
 		const f64 sz  = s * axis.Z;
-		
+
 		M[0] = (T)(tx * axis.X + c);
 		M[1] = (T)(tx * axis.Y + sz);
 		M[2] = (T)(tx * axis.Z - sy);

include/plane3d.h

@@ -37,14 +37,14 @@ class plane3d
 		// Constructors
 
 		plane3d(): Normal(0,1,0) { recalculateD(vector3d<T>(0,0,0)); }
-		
+
 		plane3d(const vector3d<T>& MPoint, const vector3d<T>& Normal) : Normal(Normal) { recalculateD(MPoint); }
-		
+
 		plane3d(T px, T py, T pz, T nx, T ny, T nz) : Normal(nx, ny, nz) { recalculateD(vector3d<T>(px, py, pz)); }
-		
+
 		plane3d(const vector3d<T>& point1, const vector3d<T>& point2, const vector3d<T>& point3)
 		{ setPlane(point1, point2, point3); }
-		
+
 		plane3d(const vector3d<T> & normal, const T d) : Normal(normal), D(d) { }
 
 		// operators

include/quaternion.h

@@ -11,7 +11,7 @@
 #include "vector3d.h"
 
 // Between Irrlicht 1.7 and Irrlicht 1.8 the quaternion-matrix conversions got fixed.
-// This define disables all involved functions completely to allow finding all places 
+// This define disables all involved functions completely to allow finding all places
 // where the wrong conversions had been in use.
 #define IRR_TEST_BROKEN_QUATERNION_USE 0
 
@@ -101,7 +101,7 @@ class quaternion
 #if !IRR_TEST_BROKEN_QUATERNION_USE
 		//! Creates a matrix from this quaternion
 		matrix4 getMatrix() const;
-#endif 
+#endif
 
 		//! Creates a matrix from this quaternion
 		void getMatrix( matrix4 &dest, const core::vector3df &translation=core::vector3df() ) const;

include/triangle3d.h

@@ -93,8 +93,8 @@ namespace core
 			vector3d<f64> cf64((f64)pointC.X, (f64)pointC.Y, (f64)pointC.Z);
 			vector3d<f64> pf64((f64)p.X, (f64)p.Y, (f64)p.Z);
 			return (isOnSameSide(pf64, af64, bf64, cf64) &&
- 				isOnSameSide(pf64, bf64, af64, cf64) &&
- 				isOnSameSide(pf64, cf64, af64, bf64));
+				isOnSameSide(pf64, bf64, af64, cf64) &&
+				isOnSameSide(pf64, cf64, af64, bf64));
 		}
 
 		//! Check if a point is inside the triangle (border-points count also as inside)
@@ -254,9 +254,9 @@ namespace core
 				// This catches some floating point troubles.
 				// Unfortunately slightly expensive and we don't really know the best epsilon for iszero.
 				vector3d<f64> cp1 = bminusa.normalize().crossProduct((p1 - a).normalize());
-				if ( 	core::iszero(cp1.X, (f64)ROUNDING_ERROR_f32)
-					&& 	core::iszero(cp1.Y, (f64)ROUNDING_ERROR_f32)
-					&& 	core::iszero(cp1.Z, (f64)ROUNDING_ERROR_f32) )
+				if (core::iszero(cp1.X, (f64)ROUNDING_ERROR_f32)
+					&& core::iszero(cp1.Y, (f64)ROUNDING_ERROR_f32)
+					&& core::iszero(cp1.Z, (f64)ROUNDING_ERROR_f32) )
 				{
 					res = 0.f;
 				}

include/vector2d.h

@@ -67,28 +67,28 @@ public:
 	//! sort in order X, Y. Equality with rounding tolerance.
 	bool operator<=(const vector2d<T>&other) const
 	{
-		return 	(X<other.X || core::equals(X, other.X)) ||
+		return (X<other.X || core::equals(X, other.X)) ||
 				(core::equals(X, other.X) && (Y<other.Y || core::equals(Y, other.Y)));
 	}
 
 	//! sort in order X, Y. Equality with rounding tolerance.
 	bool operator>=(const vector2d<T>&other) const
 	{
-		return 	(X>other.X || core::equals(X, other.X)) ||
+		return (X>other.X || core::equals(X, other.X)) ||
 				(core::equals(X, other.X) && (Y>other.Y || core::equals(Y, other.Y)));
 	}
 
 	//! sort in order X, Y. Difference must be above rounding tolerance.
 	bool operator<(const vector2d<T>&other) const
 	{
-		return 	(X<other.X && !core::equals(X, other.X)) ||
+		return (X<other.X && !core::equals(X, other.X)) ||
 				(core::equals(X, other.X) && Y<other.Y && !core::equals(Y, other.Y));
 	}
 
 	//! sort in order X, Y. Difference must be above rounding tolerance.
 	bool operator>(const vector2d<T>&other) const
 	{
-		return 	(X>other.X && !core::equals(X, other.X)) ||
+		return (X>other.X && !core::equals(X, other.X)) ||
 				(core::equals(X, other.X) && Y>other.Y && !core::equals(Y, other.Y));
 	}
 

include/vector3d.h

@@ -60,7 +60,7 @@ namespace core
 		//! sort in order X, Y, Z. Equality with rounding tolerance.
 		bool operator<=(const vector3d<T>&other) const
 		{
-			return 	(X<other.X || core::equals(X, other.X)) ||
+			return (X<other.X || core::equals(X, other.X)) ||
 					(core::equals(X, other.X) && (Y<other.Y || core::equals(Y, other.Y))) ||
 					(core::equals(X, other.X) && core::equals(Y, other.Y) && (Z<other.Z || core::equals(Z, other.Z)));
 		}
@@ -68,7 +68,7 @@ namespace core
 		//! sort in order X, Y, Z. Equality with rounding tolerance.
 		bool operator>=(const vector3d<T>&other) const
 		{
-			return 	(X>other.X || core::equals(X, other.X)) ||
+			return (X>other.X || core::equals(X, other.X)) ||
 					(core::equals(X, other.X) && (Y>other.Y || core::equals(Y, other.Y))) ||
 					(core::equals(X, other.X) && core::equals(Y, other.Y) && (Z>other.Z || core::equals(Z, other.Z)));
 		}
@@ -76,7 +76,7 @@ namespace core
 		//! sort in order X, Y, Z. Difference must be above rounding tolerance.
 		bool operator<(const vector3d<T>&other) const
 		{
-			return 	(X<other.X && !core::equals(X, other.X)) ||
+			return (X<other.X && !core::equals(X, other.X)) ||
 					(core::equals(X, other.X) && Y<other.Y && !core::equals(Y, other.Y)) ||
 					(core::equals(X, other.X) && core::equals(Y, other.Y) && Z<other.Z && !core::equals(Z, other.Z));
 		}
@@ -84,7 +84,7 @@ namespace core
 		//! sort in order X, Y, Z. Difference must be above rounding tolerance.
 		bool operator>(const vector3d<T>&other) const
 		{
-			return 	(X>other.X && !core::equals(X, other.X)) ||
+			return (X>other.X && !core::equals(X, other.X)) ||
 					(core::equals(X, other.X) && Y>other.Y && !core::equals(Y, other.Y)) ||
 					(core::equals(X, other.X) && core::equals(Y, other.Y) && Z>other.Z && !core::equals(Z, other.Z));
 		}