# proxy

*proxy* facilitates both a basic reverse proxy and a robust load balancer. The proxy has support for
 multiple backends. The load balancing features include multiple policies, health checks, and
 failovers. If all hosts fail their health check the proxy middleware will fail back to randomly
 selecting a target and sending packets to it.

## Syntax

In its most basic form, a simple reverse proxy uses this syntax:

~~~
proxy FROM TO
~~~

* **FROM** is the base domain to match for the request to be proxied.
* **TO** is the destination endpoint to proxy to.

However, advanced features including load balancing can be utilized with an expanded syntax:

~~~
proxy FROM TO... {
    policy random|least_conn|round_robin
    fail_timeout DURATION
    max_fails INTEGER
    health_check PATH:PORT [DURATION]
    except IGNORED_NAMES...
    spray
    protocol [dns [force_tcp]|https_google [bootstrap ADDRESS...]|grpc [insecure|CA-PEM|KEY-PEM CERT-PEM|KEY-PEM CERT-PEM CA-PEM]]
}
~~~

* **FROM** is the name to match for the request to be proxied.
* **TO** is the destination endpoint to proxy to. At least one is required, but multiple may be
  specified. **TO** may be an IP:Port pair, or may reference a file in resolv.conf format
* `policy` is the load balancing policy to use; applies only with multiple backends. May be one of
  random, least_conn, or round_robin. Default is random.
* `fail_timeout` specifies how long to consider a backend as down after it has failed. While it is
  down, requests will not be routed to that backend. A backend is "down" if CoreDNS fails to
  communicate with it. The default value is 10 seconds ("10s").
* `max_fails` is the number of failures within fail_timeout that are needed before considering
  a backend to be down. If 0, the backend will never be marked as down. Default is 1.
* `health_check` will check path (on port) on each backend. If a backend returns a status code of
  200-399, then that backend is healthy. If it doesn't, the backend is marked as unhealthy for
  duration and no requests are routed to it. If this option is not provided then health checks are
  disabled. The default duration is 30 seconds ("30s").
* **IGNORED_NAMES** in `except` is a space-separated list of domains to exclude from proxying.
  Requests that match none of these names will be passed through.
* `spray` when all backends are unhealthy, randomly pick one to send the traffic to. (This is
  a failsafe.)
* `protocol` specifies what protocol to use to speak to an upstream, `dns` (the default) is plain
  old DNS, and `https_google` uses `https://dns.google.com` and speaks a JSON DNS dialect. Note when
  using this **TO** will be ignored. The `grpc` option will talk to a server that has implemented
  the [DnsService](https://github.com/coredns/coredns/pb/dns.proto).
  An out-of-tree middleware that implements the server side of this can be found at
  [here](https://github.com/infobloxopen/coredns-grpc).

## Policies

There are three load-balancing policies available:
* `random` (default) - Randomly select a backend
* `least_conn` - Select the backend with the fewest active connections
* `round_robin` - Select the backend in round-robin fashion

All polices implement randomly spraying packets to backend hosts when *no healthy* hosts are
available. This is to preeempt the case where the healthchecking (as a mechanism) fails.

## Upstream Protocols

Currently `protocol` supports `dns` (i.e., standard DNS over UDP/TCP) and `https_google` (JSON
payload over HTTPS). Note that with `https_google` the entire transport is encrypted. Only *you* and
*Google* can see your DNS activity.

* `dns`: uses the standard DNS exchange. You can pass `force_tcp` to make sure that the proxied connection is performed
  over TCP, regardless of the inbound request's protocol.
* `https_google`: bootstrap **ADDRESS...** is used to (re-)resolve `dns.google.com` to an address to
  connect to. This happens every 300s. If not specified the default is used: 8.8.8.8:53/8.8.4.4:53.
  Note that **TO** is *ignored* when `https_google` is used, as its upstream is defined as
  `dns.google.com`.

  Debug queries are enabled by default and currently there is no way to turn them off. When CoreDNS
  receives a debug query (i.e. the name is prefixed with `o-o.debug.`) a TXT record with Comment
  from `dns.google.com` is added. Note this is not always set.
* `grpc`: options are used to control how the TLS connection is made to the gRPC server.
  * None - No client authentication is used, and the system CAs are used to verify the server certificate.
  * `insecure` - TLS is not used, the connection is made in plaintext (not good in production).
  * CA-PEM - No client authentication is used, and the file CA-PEM is used to verify the server certificate.
  * KEY-PEM CERT-PEM - Client authentication is used with the specified key/cert pair. The server
    certificate is verified with the system CAs.
  * KEY-PEM CERT-PEM CA-PEM - Client authentication is used with the specified key/cert pair. The
    server certificate is verified using the CA-PEM file.

  An out-of-tree middleware that implements the server side of this can be found at
  [here](https://github.com/infobloxopen/coredns-grpc).

## Metrics

If monitoring is enabled (via the *prometheus* directive) then the following metric is exported:

* coredns_proxy_request_count_total{proto, proxy_proto, from}

Where `proxy_proto` is the protocol used (`dns`, `grpc`, or `https_google`) and `from` is **FROM**
specified in the config, `proto` is the protocol used by the incoming query ("tcp" or "udp").

## Examples

Proxy all requests within example.org. to a backend system:

~~~
proxy example.org localhost:9005
~~~

Load-balance all requests between three backends (using random policy):

~~~
proxy . dns1.local:53 dns2.local:1053 dns3.local
~~~

Same as above, but round-robin style:

~~~
proxy . dns1.local:53 dns2.local:1053 dns3.local {
	policy round_robin
}
~~~

With health checks and proxy headers to pass hostname, IP, and scheme upstream:

~~~
proxy . dns1.local:53 dns2.local:53 dns3.local:53 {
	policy round_robin
	health_check /health:8080
}
~~~

Proxy everything except requests to miek.nl or example.org

~~~
proxy . backend:1234 {
	except miek.nl example.org
}
~~~

Proxy everything except example.org using the host resolv.conf nameservers:

~~~
proxy . /etc/resolv.conf {
	except miek.nl example.org
}
~~~

Proxy all requests within example.org to Google's dns.google.com.

~~~
proxy example.org 1.2.3.4:53 {
    protocol https_google
}
~~~

Proxy everything with HTTPS to `dns.google.com`, except `example.org`. Then have another proxy in
another stanza that uses plain DNS to resolve names under `example.org`.

~~~
. {
    proxy . 1.2.3.4:53 {
        execpt example.org
        protocol https_google
    }
}

example.org {
    proxy . 8.8.8.8:53
}
~~~
