update vendor

vendor/golang.org/x/crypto/blowfish/block.go

+// Copyright 2010 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package blowfish
+
+// getNextWord returns the next big-endian uint32 value from the byte slice
+// at the given position in a circular manner, updating the position.
+func getNextWord(b []byte, pos *int) uint32 {
+	var w uint32
+	j := *pos
+	for i := 0; i < 4; i++ {
+		w = w<<8 | uint32(b[j])
+		j++
+		if j >= len(b) {
+			j = 0
+		}
+	}
+	*pos = j
+	return w
+}
+
+// ExpandKey performs a key expansion on the given *Cipher. Specifically, it
+// performs the Blowfish algorithm's key schedule which sets up the *Cipher's
+// pi and substitution tables for calls to Encrypt. This is used, primarily,
+// by the bcrypt package to reuse the Blowfish key schedule during its
+// set up. It's unlikely that you need to use this directly.
+func ExpandKey(key []byte, c *Cipher) {
+	j := 0
+	for i := 0; i < 18; i++ {
+		// Using inlined getNextWord for performance.
+		var d uint32
+		for k := 0; k < 4; k++ {
+			d = d<<8 | uint32(key[j])
+			j++
+			if j >= len(key) {
+				j = 0
+			}
+		}
+		c.p[i] ^= d
+	}
+
+	var l, r uint32
+	for i := 0; i < 18; i += 2 {
+		l, r = encryptBlock(l, r, c)
+		c.p[i], c.p[i+1] = l, r
+	}
+
+	for i := 0; i < 256; i += 2 {
+		l, r = encryptBlock(l, r, c)
+		c.s0[i], c.s0[i+1] = l, r
+	}
+	for i := 0; i < 256; i += 2 {
+		l, r = encryptBlock(l, r, c)
+		c.s1[i], c.s1[i+1] = l, r
+	}
+	for i := 0; i < 256; i += 2 {
+		l, r = encryptBlock(l, r, c)
+		c.s2[i], c.s2[i+1] = l, r
+	}
+	for i := 0; i < 256; i += 2 {
+		l, r = encryptBlock(l, r, c)
+		c.s3[i], c.s3[i+1] = l, r
+	}
+}
+
+// This is similar to ExpandKey, but folds the salt during the key
+// schedule. While ExpandKey is essentially expandKeyWithSalt with an all-zero
+// salt passed in, reusing ExpandKey turns out to be a place of inefficiency
+// and specializing it here is useful.
+func expandKeyWithSalt(key []byte, salt []byte, c *Cipher) {
+	j := 0
+	for i := 0; i < 18; i++ {
+		c.p[i] ^= getNextWord(key, &j)
+	}
+
+	j = 0
+	var l, r uint32
+	for i := 0; i < 18; i += 2 {
+		l ^= getNextWord(salt, &j)
+		r ^= getNextWord(salt, &j)
+		l, r = encryptBlock(l, r, c)
+		c.p[i], c.p[i+1] = l, r
+	}
+
+	for i := 0; i < 256; i += 2 {
+		l ^= getNextWord(salt, &j)
+		r ^= getNextWord(salt, &j)
+		l, r = encryptBlock(l, r, c)
+		c.s0[i], c.s0[i+1] = l, r
+	}
+
+	for i := 0; i < 256; i += 2 {
+		l ^= getNextWord(salt, &j)
+		r ^= getNextWord(salt, &j)
+		l, r = encryptBlock(l, r, c)
+		c.s1[i], c.s1[i+1] = l, r
+	}
+
+	for i := 0; i < 256; i += 2 {
+		l ^= getNextWord(salt, &j)
+		r ^= getNextWord(salt, &j)
+		l, r = encryptBlock(l, r, c)
+		c.s2[i], c.s2[i+1] = l, r
+	}
+
+	for i := 0; i < 256; i += 2 {
+		l ^= getNextWord(salt, &j)
+		r ^= getNextWord(salt, &j)
+		l, r = encryptBlock(l, r, c)
+		c.s3[i], c.s3[i+1] = l, r
+	}
+}
+
+func encryptBlock(l, r uint32, c *Cipher) (uint32, uint32) {
+	xl, xr := l, r
+	xl ^= c.p[0]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[1]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[2]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[3]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[4]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[5]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[6]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[7]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[8]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[9]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[10]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[11]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[12]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[13]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[14]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[15]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[16]
+	xr ^= c.p[17]
+	return xr, xl
+}
+
+func decryptBlock(l, r uint32, c *Cipher) (uint32, uint32) {
+	xl, xr := l, r
+	xl ^= c.p[17]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[16]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[15]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[14]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[13]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[12]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[11]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[10]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[9]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[8]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[7]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[6]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[5]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[4]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[3]
+	xr ^= ((c.s0[byte(xl>>24)] + c.s1[byte(xl>>16)]) ^ c.s2[byte(xl>>8)]) + c.s3[byte(xl)] ^ c.p[2]
+	xl ^= ((c.s0[byte(xr>>24)] + c.s1[byte(xr>>16)]) ^ c.s2[byte(xr>>8)]) + c.s3[byte(xr)] ^ c.p[1]
+	xr ^= c.p[0]
+	return xr, xl
+}

vendor/golang.org/x/crypto/blowfish/cipher.go

+// Copyright 2010 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package blowfish implements Bruce Schneier's Blowfish encryption algorithm.
+package blowfish // import "golang.org/x/crypto/blowfish"
+
+// The code is a port of Bruce Schneier's C implementation.
+// See https://www.schneier.com/blowfish.html.
+
+import "strconv"
+
+// The Blowfish block size in bytes.
+const BlockSize = 8
+
+// A Cipher is an instance of Blowfish encryption using a particular key.
+type Cipher struct {
+	p              [18]uint32
+	s0, s1, s2, s3 [256]uint32
+}
+
+type KeySizeError int
+
+func (k KeySizeError) Error() string {
+	return "crypto/blowfish: invalid key size " + strconv.Itoa(int(k))
+}
+
+// NewCipher creates and returns a Cipher.
+// The key argument should be the Blowfish key, from 1 to 56 bytes.
+func NewCipher(key []byte) (*Cipher, error) {
+	var result Cipher
+	if k := len(key); k < 1 || k > 56 {
+		return nil, KeySizeError(k)
+	}
+	initCipher(&result)
+	ExpandKey(key, &result)
+	return &result, nil
+}
+
+// NewSaltedCipher creates a returns a Cipher that folds a salt into its key
+// schedule. For most purposes, NewCipher, instead of NewSaltedCipher, is
+// sufficient and desirable. For bcrypt compatibility, the key can be over 56
+// bytes.
+func NewSaltedCipher(key, salt []byte) (*Cipher, error) {
+	if len(salt) == 0 {
+		return NewCipher(key)
+	}
+	var result Cipher
+	if k := len(key); k < 1 {
+		return nil, KeySizeError(k)
+	}
+	initCipher(&result)
+	expandKeyWithSalt(key, salt, &result)
+	return &result, nil
+}
+
+// BlockSize returns the Blowfish block size, 8 bytes.
+// It is necessary to satisfy the Block interface in the
+// package "crypto/cipher".
+func (c *Cipher) BlockSize() int { return BlockSize }
+
+// Encrypt encrypts the 8-byte buffer src using the key k
+// and stores the result in dst.
+// Note that for amounts of data larger than a block,
+// it is not safe to just call Encrypt on successive blocks;
+// instead, use an encryption mode like CBC (see crypto/cipher/cbc.go).
+func (c *Cipher) Encrypt(dst, src []byte) {
+	l := uint32(src[0])<<24 | uint32(src[1])<<16 | uint32(src[2])<<8 | uint32(src[3])
+	r := uint32(src[4])<<24 | uint32(src[5])<<16 | uint32(src[6])<<8 | uint32(src[7])
+	l, r = encryptBlock(l, r, c)
+	dst[0], dst[1], dst[2], dst[3] = byte(l>>24), byte(l>>16), byte(l>>8), byte(l)
+	dst[4], dst[5], dst[6], dst[7] = byte(r>>24), byte(r>>16), byte(r>>8), byte(r)
+}
+
+// Decrypt decrypts the 8-byte buffer src using the key k
+// and stores the result in dst.
+func (c *Cipher) Decrypt(dst, src []byte) {
+	l := uint32(src[0])<<24 | uint32(src[1])<<16 | uint32(src[2])<<8 | uint32(src[3])
+	r := uint32(src[4])<<24 | uint32(src[5])<<16 | uint32(src[6])<<8 | uint32(src[7])
+	l, r = decryptBlock(l, r, c)
+	dst[0], dst[1], dst[2], dst[3] = byte(l>>24), byte(l>>16), byte(l>>8), byte(l)
+	dst[4], dst[5], dst[6], dst[7] = byte(r>>24), byte(r>>16), byte(r>>8), byte(r)
+}
+
+func initCipher(c *Cipher) {
+	copy(c.p[0:], p[0:])
+	copy(c.s0[0:], s0[0:])
+	copy(c.s1[0:], s1[0:])
+	copy(c.s2[0:], s2[0:])
+	copy(c.s3[0:], s3[0:])
+}

vendor/golang.org/x/crypto/curve25519/const_amd64.h

+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// This code was translated into a form compatible with 6a from the public
+// domain sources in SUPERCOP: https://bench.cr.yp.to/supercop.html
+
+#define REDMASK51     0x0007FFFFFFFFFFFF

vendor/golang.org/x/crypto/curve25519/const_amd64.s

+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// This code was translated into a form compatible with 6a from the public
+// domain sources in SUPERCOP: https://bench.cr.yp.to/supercop.html
+
+// +build amd64,!gccgo,!appengine
+
+// These constants cannot be encoded in non-MOVQ immediates.
+// We access them directly from memory instead.
+
+DATA ·_121666_213(SB)/8, $996687872
+GLOBL ·_121666_213(SB), 8, $8
+
+DATA ·_2P0(SB)/8, $0xFFFFFFFFFFFDA
+GLOBL ·_2P0(SB), 8, $8
+
+DATA ·_2P1234(SB)/8, $0xFFFFFFFFFFFFE
+GLOBL ·_2P1234(SB), 8, $8

vendor/golang.org/x/crypto/curve25519/cswap_amd64.s

+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build amd64,!gccgo,!appengine
+
+// func cswap(inout *[4][5]uint64, v uint64)
+TEXT ·cswap(SB),7,$0
+	MOVQ inout+0(FP),DI
+	MOVQ v+8(FP),SI
+
+	SUBQ $1, SI
+	NOTQ SI
+	MOVQ SI, X15
+	PSHUFD $0x44, X15, X15
+
+	MOVOU 0(DI), X0
+	MOVOU 16(DI), X2
+	MOVOU 32(DI), X4
+	MOVOU 48(DI), X6
+	MOVOU 64(DI), X8
+	MOVOU 80(DI), X1
+	MOVOU 96(DI), X3
+	MOVOU 112(DI), X5
+	MOVOU 128(DI), X7
+	MOVOU 144(DI), X9
+
+	MOVO X1, X10
+	MOVO X3, X11
+	MOVO X5, X12
+	MOVO X7, X13
+	MOVO X9, X14
+
+	PXOR X0, X10
+	PXOR X2, X11
+	PXOR X4, X12
+	PXOR X6, X13
+	PXOR X8, X14
+	PAND X15, X10
+	PAND X15, X11
+	PAND X15, X12
+	PAND X15, X13
+	PAND X15, X14
+	PXOR X10, X0
+	PXOR X10, X1
+	PXOR X11, X2
+	PXOR X11, X3
+	PXOR X12, X4
+	PXOR X12, X5
+	PXOR X13, X6
+	PXOR X13, X7
+	PXOR X14, X8
+	PXOR X14, X9
+
+	MOVOU X0, 0(DI)
+	MOVOU X2, 16(DI)
+	MOVOU X4, 32(DI)
+	MOVOU X6, 48(DI)
+	MOVOU X8, 64(DI)
+	MOVOU X1, 80(DI)
+	MOVOU X3, 96(DI)
+	MOVOU X5, 112(DI)
+	MOVOU X7, 128(DI)
+	MOVOU X9, 144(DI)
+	RET

vendor/golang.org/x/crypto/curve25519/doc.go

+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package curve25519 provides an implementation of scalar multiplication on
+// the elliptic curve known as curve25519. See https://cr.yp.to/ecdh.html
+package curve25519 // import "golang.org/x/crypto/curve25519"
+
+// basePoint is the x coordinate of the generator of the curve.
+var basePoint = [32]byte{9, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
+
+// ScalarMult sets dst to the product in*base where dst and base are the x
+// coordinates of group points and all values are in little-endian form.
+func ScalarMult(dst, in, base *[32]byte) {
+	scalarMult(dst, in, base)
+}
+
+// ScalarBaseMult sets dst to the product in*base where dst and base are the x
+// coordinates of group points, base is the standard generator and all values
+// are in little-endian form.
+func ScalarBaseMult(dst, in *[32]byte) {
+	ScalarMult(dst, in, &basePoint)
+}

vendor/golang.org/x/crypto/curve25519/freeze_amd64.s

+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// This code was translated into a form compatible with 6a from the public
+// domain sources in SUPERCOP: https://bench.cr.yp.to/supercop.html
+
+// +build amd64,!gccgo,!appengine
+
+#include "const_amd64.h"
+
+// func freeze(inout *[5]uint64)
+TEXT ·freeze(SB),7,$0-8
+	MOVQ inout+0(FP), DI
+
+	MOVQ 0(DI),SI
+	MOVQ 8(DI),DX
+	MOVQ 16(DI),CX
+	MOVQ 24(DI),R8
+	MOVQ 32(DI),R9
+	MOVQ $REDMASK51,AX
+	MOVQ AX,R10
+	SUBQ $18,R10
+	MOVQ $3,R11
+REDUCELOOP:
+	MOVQ SI,R12
+	SHRQ $51,R12
+	ANDQ AX,SI
+	ADDQ R12,DX
+	MOVQ DX,R12
+	SHRQ $51,R12
+	ANDQ AX,DX
+	ADDQ R12,CX
+	MOVQ CX,R12
+	SHRQ $51,R12
+	ANDQ AX,CX
+	ADDQ R12,R8
+	MOVQ R8,R12
+	SHRQ $51,R12
+	ANDQ AX,R8
+	ADDQ R12,R9
+	MOVQ R9,R12
+	SHRQ $51,R12
+	ANDQ AX,R9
+	IMUL3Q $19,R12,R12
+	ADDQ R12,SI
+	SUBQ $1,R11
+	JA REDUCELOOP
+	MOVQ $1,R12
+	CMPQ R10,SI
+	CMOVQLT R11,R12
+	CMPQ AX,DX
+	CMOVQNE R11,R12
+	CMPQ AX,CX
+	CMOVQNE R11,R12
+	CMPQ AX,R8
+	CMOVQNE R11,R12
+	CMPQ AX,R9
+	CMOVQNE R11,R12
+	NEGQ R12
+	ANDQ R12,AX
+	ANDQ R12,R10
+	SUBQ R10,SI
+	SUBQ AX,DX
+	SUBQ AX,CX
+	SUBQ AX,R8
+	SUBQ AX,R9
+	MOVQ SI,0(DI)
+	MOVQ DX,8(DI)
+	MOVQ CX,16(DI)
+	MOVQ R8,24(DI)
+	MOVQ R9,32(DI)
+	RET

vendor/golang.org/x/crypto/curve25519/mont25519_amd64.go

+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build amd64,!gccgo,!appengine
+
+package curve25519
+
+// These functions are implemented in the .s files. The names of the functions
+// in the rest of the file are also taken from the SUPERCOP sources to help
+// people following along.
+
+//go:noescape
+
+func cswap(inout *[5]uint64, v uint64)
+
+//go:noescape
+
+func ladderstep(inout *[5][5]uint64)
+
+//go:noescape
+
+func freeze(inout *[5]uint64)
+
+//go:noescape
+
+func mul(dest, a, b *[5]uint64)
+
+//go:noescape
+
+func square(out, in *[5]uint64)
+
+// mladder uses a Montgomery ladder to calculate (xr/zr) *= s.
+func mladder(xr, zr *[5]uint64, s *[32]byte) {
+	var work [5][5]uint64
+
+	work[0] = *xr
+	setint(&work[1], 1)
+	setint(&work[2], 0)
+	work[3] = *xr
+	setint(&work[4], 1)
+
+	j := uint(6)
+	var prevbit byte
+
+	for i := 31; i >= 0; i-- {
+		for j < 8 {
+			bit := ((*s)[i] >> j) & 1
+			swap := bit ^ prevbit
+			prevbit = bit
+			cswap(&work[1], uint64(swap))
+			ladderstep(&work)
+			j--
+		}
+		j = 7
+	}
+
+	*xr = work[1]
+	*zr = work[2]
+}
+
+func scalarMult(out, in, base *[32]byte) {
+	var e [32]byte
+	copy(e[:], (*in)[:])
+	e[0] &= 248
+	e[31] &= 127
+	e[31] |= 64
+
+	var t, z [5]uint64
+	unpack(&t, base)
+	mladder(&t, &z, &e)
+	invert(&z, &z)
+	mul(&t, &t, &z)
+	pack(out, &t)
+}
+
+func setint(r *[5]uint64, v uint64) {
+	r[0] = v
+	r[1] = 0
+	r[2] = 0
+	r[3] = 0
+	r[4] = 0
+}
+
+// unpack sets r = x where r consists of 5, 51-bit limbs in little-endian
+// order.
+func unpack(r *[5]uint64, x *[32]byte) {
+	r[0] = uint64(x[0]) |
+		uint64(x[1])<<8 |
+		uint64(x[2])<<16 |
+		uint64(x[3])<<24 |
+		uint64(x[4])<<32 |
+		uint64(x[5])<<40 |
+		uint64(x[6]&7)<<48
+
+	r[1] = uint64(x[6])>>3 |
+		uint64(x[7])<<5 |
+		uint64(x[8])<<13 |
+		uint64(x[9])<<21 |
+		uint64(x[10])<<29 |
+		uint64(x[11])<<37 |
+		uint64(x[12]&63)<<45
+
+	r[2] = uint64(x[12])>>6 |
+		uint64(x[13])<<2 |
+		uint64(x[14])<<10 |
+		uint64(x[15])<<18 |
+		uint64(x[16])<<26 |
+		uint64(x[17])<<34 |
+		uint64(x[18])<<42 |
+		uint64(x[19]&1)<<50
+
+	r[3] = uint64(x[19])>>1 |
+		uint64(x[20])<<7 |
+		uint64(x[21])<<15 |
+		uint64(x[22])<<23 |
+		uint64(x[23])<<31 |
+		uint64(x[24])<<39 |
+		uint64(x[25]&15)<<47
+
+	r[4] = uint64(x[25])>>4 |
+		uint64(x[26])<<4 |
+		uint64(x[27])<<12 |
+		uint64(x[28])<<20 |
+		uint64(x[29])<<28 |
+		uint64(x[30])<<36 |
+		uint64(x[31]&127)<<44
+}
+
+// pack sets out = x where out is the usual, little-endian form of the 5,
+// 51-bit limbs in x.
+func pack(out *[32]byte, x *[5]uint64) {
+	t := *x
+	freeze(&t)
+
+	out[0] = byte(t[0])
+	out[1] = byte(t[0] >> 8)
+	out[2] = byte(t[0] >> 16)
+	out[3] = byte(t[0] >> 24)
+	out[4] = byte(t[0] >> 32)
+	out[5] = byte(t[0] >> 40)
+	out[6] = byte(t[0] >> 48)
+
+	out[6] ^= byte(t[1]<<3) & 0xf8
+	out[7] = byte(t[1] >> 5)
+	out[8] = byte(t[1] >> 13)
+	out[9] = byte(t[1] >> 21)
+	out[10] = byte(t[1] >> 29)
+	out[11] = byte(t[1] >> 37)
+	out[12] = byte(t[1] >> 45)
+
+	out[12] ^= byte(t[2]<<6) & 0xc0
+	out[13] = byte(t[2] >> 2)
+	out[14] = byte(t[2] >> 10)
+	out[15] = byte(t[2] >> 18)
+	out[16] = byte(t[2] >> 26)
+	out[17] = byte(t[2] >> 34)
+	out[18] = byte(t[2] >> 42)
+	out[19] = byte(t[2] >> 50)
+
+	out[19] ^= byte(t[3]<<1) & 0xfe
+	out[20] = byte(t[3] >> 7)
+	out[21] = byte(t[3] >> 15)
+	out[22] = byte(t[3] >> 23)
+	out[23] = byte(t[3] >> 31)
+	out[24] = byte(t[3] >> 39)
+	out[25] = byte(t[3] >> 47)
+
+	out[25] ^= byte(t[4]<<4) & 0xf0
+	out[26] = byte(t[4] >> 4)
+	out[27] = byte(t[4] >> 12)
+	out[28] = byte(t[4] >> 20)
+	out[29] = byte(t[4] >> 28)
+	out[30] = byte(t[4] >> 36)
+	out[31] = byte(t[4] >> 44)
+}
+
+// invert calculates r = x^-1 mod p using Fermat's little theorem.
+func invert(r *[5]uint64, x *[5]uint64) {
+	var z2, z9, z11, z2_5_0, z2_10_0, z2_20_0, z2_50_0, z2_100_0, t [5]uint64
+
+	square(&z2, x)        /* 2 */
+	square(&t, &z2)       /* 4 */
+	square(&t, &t)        /* 8 */
+	mul(&z9, &t, x)       /* 9 */
+	mul(&z11, &z9, &z2)   /* 11 */
+	square(&t, &z11)      /* 22 */
+	mul(&z2_5_0, &t, &z9) /* 2^5 - 2^0 = 31 */
+
+	square(&t, &z2_5_0)      /* 2^6 - 2^1 */
+	for i := 1; i < 5; i++ { /* 2^20 - 2^10 */
+		square(&t, &t)
+	}
+	mul(&z2_10_0, &t, &z2_5_0) /* 2^10 - 2^0 */
+
+	square(&t, &z2_10_0)      /* 2^11 - 2^1 */
+	for i := 1; i < 10; i++ { /* 2^20 - 2^10 */
+		square(&t, &t)
+	}
+	mul(&z2_20_0, &t, &z2_10_0) /* 2^20 - 2^0 */
+
+	square(&t, &z2_20_0)      /* 2^21 - 2^1 */
+	for i := 1; i < 20; i++ { /* 2^40 - 2^20 */
+		square(&t, &t)
+	}
+	mul(&t, &t, &z2_20_0) /* 2^40 - 2^0 */
+
+	square(&t, &t)            /* 2^41 - 2^1 */
+	for i := 1; i < 10; i++ { /* 2^50 - 2^10 */
+		square(&t, &t)
+	}
+	mul(&z2_50_0, &t, &z2_10_0) /* 2^50 - 2^0 */
+
+	square(&t, &z2_50_0)      /* 2^51 - 2^1 */
+	for i := 1; i < 50; i++ { /* 2^100 - 2^50 */
+		square(&t, &t)
+	}
+	mul(&z2_100_0, &t, &z2_50_0) /* 2^100 - 2^0 */
+
+	square(&t, &z2_100_0)      /* 2^101 - 2^1 */
+	for i := 1; i < 100; i++ { /* 2^200 - 2^100 */
+		square(&t, &t)
+	}
+	mul(&t, &t, &z2_100_0) /* 2^200 - 2^0 */
+
+	square(&t, &t)            /* 2^201 - 2^1 */
+	for i := 1; i < 50; i++ { /* 2^250 - 2^50 */
+		square(&t, &t)
+	}
+	mul(&t, &t, &z2_50_0) /* 2^250 - 2^0 */
+
+	square(&t, &t) /* 2^251 - 2^1 */
+	square(&t, &t) /* 2^252 - 2^2 */
+	square(&t, &t) /* 2^253 - 2^3 */
+
+	square(&t, &t) /* 2^254 - 2^4 */
+
+	square(&t, &t)   /* 2^255 - 2^5 */
+	mul(r, &t, &z11) /* 2^255 - 21 */
+}

vendor/golang.org/x/crypto/curve25519/mul_amd64.s

+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// This code was translated into a form compatible with 6a from the public
+// domain sources in SUPERCOP: https://bench.cr.yp.to/supercop.html
+
+// +build amd64,!gccgo,!appengine
+
+#include "const_amd64.h"
+
+// func mul(dest, a, b *[5]uint64)
+TEXT ·mul(SB),0,$16-24
+	MOVQ dest+0(FP), DI
+	MOVQ a+8(FP), SI
+	MOVQ b+16(FP), DX
+
+	MOVQ DX,CX
+	MOVQ 24(SI),DX
+	IMUL3Q $19,DX,AX
+	MOVQ AX,0(SP)
+	MULQ 16(CX)
+	MOVQ AX,R8
+	MOVQ DX,R9
+	MOVQ 32(SI),DX
+	IMUL3Q $19,DX,AX
+	MOVQ AX,8(SP)
+	MULQ 8(CX)
+	ADDQ AX,R8
+	ADCQ DX,R9
+	MOVQ 0(SI),AX
+	MULQ 0(CX)
+	ADDQ AX,R8
+	ADCQ DX,R9
+	MOVQ 0(SI),AX
+	MULQ 8(CX)
+	MOVQ AX,R10
+	MOVQ DX,R11
+	MOVQ 0(SI),AX
+	MULQ 16(CX)
+	MOVQ AX,R12
+	MOVQ DX,R13
+	MOVQ 0(SI),AX
+	MULQ 24(CX)
+	MOVQ AX,R14
+	MOVQ DX,R15
+	MOVQ 0(SI),AX
+	MULQ 32(CX)
+	MOVQ AX,BX
+	MOVQ DX,BP
+	MOVQ 8(SI),AX
+	MULQ 0(CX)
+	ADDQ AX,R10
+	ADCQ DX,R11
+	MOVQ 8(SI),AX
+	MULQ 8(CX)
+	ADDQ AX,R12
+	ADCQ DX,R13
+	MOVQ 8(SI),AX
+	MULQ 16(CX)
+	ADDQ AX,R14
+	ADCQ DX,R15
+	MOVQ 8(SI),AX
+	MULQ 24(CX)
+	ADDQ AX,BX
+	ADCQ DX,BP
+	MOVQ 8(SI),DX
+	IMUL3Q $19,DX,AX
+	MULQ 32(CX)
+	ADDQ AX,R8
+	ADCQ DX,R9
+	MOVQ 16(SI),AX
+	MULQ 0(CX)
+	ADDQ AX,R12
+	ADCQ DX,R13
+	MOVQ 16(SI),AX
+	MULQ 8(CX)
+	ADDQ AX,R14
+	ADCQ DX,R15
+	MOVQ 16(SI),AX
+	MULQ 16(CX)
+	ADDQ AX,BX
+	ADCQ DX,BP
+	MOVQ 16(SI),DX
+	IMUL3Q $19,DX,AX
+	MULQ 24(CX)
+	ADDQ AX,R8
+	ADCQ DX,R9
+	MOVQ 16(SI),DX
+	IMUL3Q $19,DX,AX
+	MULQ 32(CX)
+	ADDQ AX,R10
+	ADCQ DX,R11
+	MOVQ 24(SI),AX
+	MULQ 0(CX)
+	ADDQ AX,R14
+	ADCQ DX,R15
+	MOVQ 24(SI),AX
+	MULQ 8(CX)
+	ADDQ AX,BX
+	ADCQ DX,BP
+	MOVQ 0(SP),AX
+	MULQ 24(CX)
+	ADDQ AX,R10
+	ADCQ DX,R11
+	MOVQ 0(SP),AX
+	MULQ 32(CX)
+	ADDQ AX,R12
+	ADCQ DX,R13
+	MOVQ 32(SI),AX
+	MULQ 0(CX)
+	ADDQ AX,BX
+	ADCQ DX,BP
+	MOVQ 8(SP),AX
+	MULQ 16(CX)
+	ADDQ AX,R10
+	ADCQ DX,R11
+	MOVQ 8(SP),AX
+	MULQ 24(CX)
+	ADDQ AX,R12
+	ADCQ DX,R13
+	MOVQ 8(SP),AX
+	MULQ 32(CX)
+	ADDQ AX,R14
+	ADCQ DX,R15
+	MOVQ $REDMASK51,SI
+	SHLQ $13,R9:R8
+	ANDQ SI,R8
+	SHLQ $13,R11:R10
+	ANDQ SI,R10
+	ADDQ R9,R10
+	SHLQ $13,R13:R12
+	ANDQ SI,R12
+	ADDQ R11,R12
+	SHLQ $13,R15:R14
+	ANDQ SI,R14
+	ADDQ R13,R14
+	SHLQ $13,BP:BX
+	ANDQ SI,BX
+	ADDQ R15,BX
+	IMUL3Q $19,BP,DX
+	ADDQ DX,R8
+	MOVQ R8,DX
+	SHRQ $51,DX
+	ADDQ R10,DX
+	MOVQ DX,CX
+	SHRQ $51,DX
+	ANDQ SI,R8
+	ADDQ R12,DX
+	MOVQ DX,R9
+	SHRQ $51,DX
+	ANDQ SI,CX
+	ADDQ R14,DX
+	MOVQ DX,AX
+	SHRQ $51,DX
+	ANDQ SI,R9
+	ADDQ BX,DX
+	MOVQ DX,R10
+	SHRQ $51,DX
+	ANDQ SI,AX
+	IMUL3Q $19,DX,DX
+	ADDQ DX,R8
+	ANDQ SI,R10
+	MOVQ R8,0(DI)
+	MOVQ CX,8(DI)
+	MOVQ R9,16(DI)
+	MOVQ AX,24(DI)
+	MOVQ R10,32(DI)
+	RET

vendor/golang.org/x/crypto/curve25519/square_amd64.s

+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// This code was translated into a form compatible with 6a from the public
+// domain sources in SUPERCOP: https://bench.cr.yp.to/supercop.html
+
+// +build amd64,!gccgo,!appengine
+
+#include "const_amd64.h"
+
+// func square(out, in *[5]uint64)
+TEXT ·square(SB),7,$0-16
+	MOVQ out+0(FP), DI
+	MOVQ in+8(FP), SI
+
+	MOVQ 0(SI),AX
+	MULQ 0(SI)
+	MOVQ AX,CX
+	MOVQ DX,R8
+	MOVQ 0(SI),AX
+	SHLQ $1,AX
+	MULQ 8(SI)
+	MOVQ AX,R9
+	MOVQ DX,R10
+	MOVQ 0(SI),AX
+	SHLQ $1,AX
+	MULQ 16(SI)
+	MOVQ AX,R11
+	MOVQ DX,R12
+	MOVQ 0(SI),AX
+	SHLQ $1,AX
+	MULQ 24(SI)
+	MOVQ AX,R13
+	MOVQ DX,R14
+	MOVQ 0(SI),AX
+	SHLQ $1,AX
+	MULQ 32(SI)
+	MOVQ AX,R15
+	MOVQ DX,BX
+	MOVQ 8(SI),AX
+	MULQ 8(SI)
+	ADDQ AX,R11
+	ADCQ DX,R12
+	MOVQ 8(SI),AX
+	SHLQ $1,AX
+	MULQ 16(SI)
+	ADDQ AX,R13
+	ADCQ DX,R14
+	MOVQ 8(SI),AX
+	SHLQ $1,AX
+	MULQ 24(SI)
+	ADDQ AX,R15
+	ADCQ DX,BX
+	MOVQ 8(SI),DX
+	IMUL3Q $38,DX,AX
+	MULQ 32(SI)
+	ADDQ AX,CX
+	ADCQ DX,R8
+	MOVQ 16(SI),AX
+	MULQ 16(SI)
+	ADDQ AX,R15
+	ADCQ DX,BX
+	MOVQ 16(SI),DX
+	IMUL3Q $38,DX,AX
+	MULQ 24(SI)
+	ADDQ AX,CX
+	ADCQ DX,R8
+	MOVQ 16(SI),DX
+	IMUL3Q $38,DX,AX
+	MULQ 32(SI)
+	ADDQ AX,R9
+	ADCQ DX,R10
+	MOVQ 24(SI),DX
+	IMUL3Q $19,DX,AX
+	MULQ 24(SI)
+	ADDQ AX,R9
+	ADCQ DX,R10
+	MOVQ 24(SI),DX
+	IMUL3Q $38,DX,AX
+	MULQ 32(SI)
+	ADDQ AX,R11
+	ADCQ DX,R12
+	MOVQ 32(SI),DX
+	IMUL3Q $19,DX,AX
+	MULQ 32(SI)
+	ADDQ AX,R13
+	ADCQ DX,R14
+	MOVQ $REDMASK51,SI
+	SHLQ $13,R8:CX
+	ANDQ SI,CX
+	SHLQ $13,R10:R9
+	ANDQ SI,R9
+	ADDQ R8,R9
+	SHLQ $13,R12:R11
+	ANDQ SI,R11
+	ADDQ R10,R11
+	SHLQ $13,R14:R13
+	ANDQ SI,R13
+	ADDQ R12,R13
+	SHLQ $13,BX:R15
+	ANDQ SI,R15
+	ADDQ R14,R15
+	IMUL3Q $19,BX,DX
+	ADDQ DX,CX
+	MOVQ CX,DX
+	SHRQ $51,DX
+	ADDQ R9,DX
+	ANDQ SI,CX
+	MOVQ DX,R8
+	SHRQ $51,DX
+	ADDQ R11,DX
+	ANDQ SI,R8
+	MOVQ DX,R9
+	SHRQ $51,DX
+	ADDQ R13,DX
+	ANDQ SI,R9
+	MOVQ DX,AX
+	SHRQ $51,DX
+	ADDQ R15,DX
+	ANDQ SI,AX
+	MOVQ DX,R10
+	SHRQ $51,DX
+	IMUL3Q $19,DX,DX
+	ADDQ DX,CX
+	ANDQ SI,R10
+	MOVQ CX,0(DI)
+	MOVQ R8,8(DI)
+	MOVQ R9,16(DI)
+	MOVQ AX,24(DI)
+	MOVQ R10,32(DI)
+	RET

vendor/golang.org/x/crypto/ed25519/ed25519.go

+// Copyright 2016 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package ed25519 implements the Ed25519 signature algorithm. See
+// https://ed25519.cr.yp.to/.
+//
+// These functions are also compatible with the “Ed25519” function defined in
+// RFC 8032. However, unlike RFC 8032's formulation, this package's private key
+// representation includes a public key suffix to make multiple signing
+// operations with the same key more efficient. This package refers to the RFC
+// 8032 private key as the “seed”.
+package ed25519
+
+// This code is a port of the public domain, “ref10” implementation of ed25519
+// from SUPERCOP.
+
+import (
+	"bytes"
+	"crypto"
+	cryptorand "crypto/rand"
+	"crypto/sha512"
+	"errors"
+	"io"
+	"strconv"
+
+	"golang.org/x/crypto/ed25519/internal/edwards25519"
+)
+
+const (
+	// PublicKeySize is the size, in bytes, of public keys as used in this package.
+	PublicKeySize = 32
+	// PrivateKeySize is the size, in bytes, of private keys as used in this package.
+	PrivateKeySize = 64
+	// SignatureSize is the size, in bytes, of signatures generated and verified by this package.
+	SignatureSize = 64
+	// SeedSize is the size, in bytes, of private key seeds. These are the private key representations used by RFC 8032.
+	SeedSize = 32
+)
+
+// PublicKey is the type of Ed25519 public keys.
+type PublicKey []byte
+
+// PrivateKey is the type of Ed25519 private keys. It implements crypto.Signer.
+type PrivateKey []byte
+
+// Public returns the PublicKey corresponding to priv.
+func (priv PrivateKey) Public() crypto.PublicKey {
+	publicKey := make([]byte, PublicKeySize)
+	copy(publicKey, priv[32:])
+	return PublicKey(publicKey)
+}
+
+// Seed returns the private key seed corresponding to priv. It is provided for
+// interoperability with RFC 8032. RFC 8032's private keys correspond to seeds
+// in this package.
+func (priv PrivateKey) Seed() []byte {
+	seed := make([]byte, SeedSize)
+	copy(seed, priv[:32])
+	return seed
+}
+
+// Sign signs the given message with priv.
+// Ed25519 performs two passes over messages to be signed and therefore cannot
+// handle pre-hashed messages. Thus opts.HashFunc() must return zero to
+// indicate the message hasn't been hashed. This can be achieved by passing
+// crypto.Hash(0) as the value for opts.
+func (priv PrivateKey) Sign(rand io.Reader, message []byte, opts crypto.SignerOpts) (signature []byte, err error) {
+	if opts.HashFunc() != crypto.Hash(0) {
+		return nil, errors.New("ed25519: cannot sign hashed message")
+	}
+
+	return Sign(priv, message), nil
+}
+
+// GenerateKey generates a public/private key pair using entropy from rand.
+// If rand is nil, crypto/rand.Reader will be used.
+func GenerateKey(rand io.Reader) (PublicKey, PrivateKey, error) {
+	if rand == nil {
+		rand = cryptorand.Reader
+	}
+
+	seed := make([]byte, SeedSize)
+	if _, err := io.ReadFull(rand, seed); err != nil {
+		return nil, nil, err
+	}
+
+	privateKey := NewKeyFromSeed(seed)
+	publicKey := make([]byte, PublicKeySize)
+	copy(publicKey, privateKey[32:])
+
+	return publicKey, privateKey, nil
+}
+
+// NewKeyFromSeed calculates a private key from a seed. It will panic if
+// len(seed) is not SeedSize. This function is provided for interoperability
+// with RFC 8032. RFC 8032's private keys correspond to seeds in this
+// package.
+func NewKeyFromSeed(seed []byte) PrivateKey {
+	if l := len(seed); l != SeedSize {
+		panic("ed25519: bad seed length: " + strconv.Itoa(l))
+	}
+
+	digest := sha512.Sum512(seed)
+	digest[0] &= 248
+	digest[31] &= 127
+	digest[31] |= 64
+
+	var A edwards25519.ExtendedGroupElement
+	var hBytes [32]byte
+	copy(hBytes[:], digest[:])
+	edwards25519.GeScalarMultBase(&A, &hBytes)
+	var publicKeyBytes [32]byte
+	A.ToBytes(&publicKeyBytes)
+
+	privateKey := make([]byte, PrivateKeySize)
+	copy(privateKey, seed)
+	copy(privateKey[32:], publicKeyBytes[:])
+
+	return privateKey
+}
+
+// Sign signs the message with privateKey and returns a signature. It will
+// panic if len(privateKey) is not PrivateKeySize.
+func Sign(privateKey PrivateKey, message []byte) []byte {
+	if l := len(privateKey); l != PrivateKeySize {
+		panic("ed25519: bad private key length: " + strconv.Itoa(l))
+	}
+
+	h := sha512.New()
+	h.Write(privateKey[:32])
+
+	var digest1, messageDigest, hramDigest [64]byte
+	var expandedSecretKey [32]byte
+	h.Sum(digest1[:0])
+	copy(expandedSecretKey[:], digest1[:])
+	expandedSecretKey[0] &= 248
+	expandedSecretKey[31] &= 63
+	expandedSecretKey[31] |= 64
+
+	h.Reset()
+	h.Write(digest1[32:])
+	h.Write(message)
+	h.Sum(messageDigest[:0])
+
+	var messageDigestReduced [32]byte
+	edwards25519.ScReduce(&messageDigestReduced, &messageDigest)
+	var R edwards25519.ExtendedGroupElement
+	edwards25519.GeScalarMultBase(&R, &messageDigestReduced)
+
+	var encodedR [32]byte
+	R.ToBytes(&encodedR)
+
+	h.Reset()
+	h.Write(encodedR[:])
+	h.Write(privateKey[32:])
+	h.Write(message)
+	h.Sum(hramDigest[:0])
+	var hramDigestReduced [32]byte
+	edwards25519.ScReduce(&hramDigestReduced, &hramDigest)
+
+	var s [32]byte
+	edwards25519.ScMulAdd(&s, &hramDigestReduced, &expandedSecretKey, &messageDigestReduced)
+
+	signature := make([]byte, SignatureSize)
+	copy(signature[:], encodedR[:])
+	copy(signature[32:], s[:])
+
+	return signature
+}
+
+// Verify reports whether sig is a valid signature of message by publicKey. It
+// will panic if len(publicKey) is not PublicKeySize.
+func Verify(publicKey PublicKey, message, sig []byte) bool {
+	if l := len(publicKey); l != PublicKeySize {
+		panic("ed25519: bad public key length: " + strconv.Itoa(l))
+	}
+
+	if len(sig) != SignatureSize || sig[63]&224 != 0 {
+		return false
+	}
+
+	var A edwards25519.ExtendedGroupElement
+	var publicKeyBytes [32]byte
+	copy(publicKeyBytes[:], publicKey)
+	if !A.FromBytes(&publicKeyBytes) {
+		return false
+	}
+	edwards25519.FeNeg(&A.X, &A.X)
+	edwards25519.FeNeg(&A.T, &A.T)
+
+	h := sha512.New()
+	h.Write(sig[:32])
+	h.Write(publicKey[:])
+	h.Write(message)
+	var digest [64]byte
+	h.Sum(digest[:0])
+
+	var hReduced [32]byte
+	edwards25519.ScReduce(&hReduced, &digest)
+
+	var R edwards25519.ProjectiveGroupElement
+	var s [32]byte
+	copy(s[:], sig[32:])
+
+	// https://tools.ietf.org/html/rfc8032#section-5.1.7 requires that s be in
+	// the range [0, order) in order to prevent signature malleability.
+	if !edwards25519.ScMinimal(&s) {
+		return false
+	}
+
+	edwards25519.GeDoubleScalarMultVartime(&R, &hReduced, &A, &s)
+
+	var checkR [32]byte
+	R.ToBytes(&checkR)
+	return bytes.Equal(sig[:32], checkR[:])
+}

vendor/golang.org/x/crypto/hkdf/hkdf.go

+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package hkdf implements the HMAC-based Extract-and-Expand Key Derivation
+// Function (HKDF) as defined in RFC 5869.
+//
+// HKDF is a cryptographic key derivation function (KDF) with the goal of
+// expanding limited input keying material into one or more cryptographically
+// strong secret keys.
+//
+// RFC 5869: https://tools.ietf.org/html/rfc5869
+package hkdf // import "golang.org/x/crypto/hkdf"
+
+import (
+	"crypto/hmac"
+	"errors"
+	"hash"
+	"io"
+)
+
+type hkdf struct {
+	expander hash.Hash
+	size     int
+
+	info    []byte
+	counter byte
+
+	prev  []byte
+	cache []byte
+}
+
+func (f *hkdf) Read(p []byte) (int, error) {
+	// Check whether enough data can be generated
+	need := len(p)
+	remains := len(f.cache) + int(255-f.counter+1)*f.size
+	if remains < need {
+		return 0, errors.New("hkdf: entropy limit reached")
+	}
+	// Read from the cache, if enough data is present
+	n := copy(p, f.cache)
+	p = p[n:]
+
+	// Fill the buffer
+	for len(p) > 0 {
+		f.expander.Reset()
+		f.expander.Write(f.prev)
+		f.expander.Write(f.info)
+		f.expander.Write([]byte{f.counter})
+		f.prev = f.expander.Sum(f.prev[:0])
+		f.counter++
+
+		// Copy the new batch into p
+		f.cache = f.prev
+		n = copy(p, f.cache)
+		p = p[n:]
+	}
+	// Save leftovers for next run
+	f.cache = f.cache[n:]
+
+	return need, nil
+}
+
+// New returns a new HKDF using the given hash, the secret keying material to expand
+// and optional salt and info fields.
+func New(hash func() hash.Hash, secret, salt, info []byte) io.Reader {
+	if salt == nil {
+		salt = make([]byte, hash().Size())
+	}
+	extractor := hmac.New(hash, salt)
+	extractor.Write(secret)
+	prk := extractor.Sum(nil)
+
+	return &hkdf{hmac.New(hash, prk), extractor.Size(), info, 1, nil, nil}
+}

vendor/golang.org/x/crypto/nacl/secretbox/secretbox.go

+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+/*
+Package secretbox encrypts and authenticates small messages.
+
+Secretbox uses XSalsa20 and Poly1305 to encrypt and authenticate messages with
+secret-key cryptography. The length of messages is not hidden.
+
+It is the caller's responsibility to ensure the uniqueness of nonces—for
+example, by using nonce 1 for the first message, nonce 2 for the second
+message, etc. Nonces are long enough that randomly generated nonces have
+negligible risk of collision.
+
+Messages should be small because:
+
+1. The whole message needs to be held in memory to be processed.
+
+2. Using large messages pressures implementations on small machines to decrypt
+and process plaintext before authenticating it. This is very dangerous, and
+this API does not allow it, but a protocol that uses excessive message sizes
+might present some implementations with no other choice.
+
+3. Fixed overheads will be sufficiently amortised by messages as small as 8KB.
+
+4. Performance may be improved by working with messages that fit into data caches.
+
+Thus large amounts of data should be chunked so that each message is small.
+(Each message still needs a unique nonce.) If in doubt, 16KB is a reasonable
+chunk size.
+
+This package is interoperable with NaCl: https://nacl.cr.yp.to/secretbox.html.
+*/
+package secretbox // import "golang.org/x/crypto/nacl/secretbox"
+
+import (
+	"golang.org/x/crypto/internal/subtle"
+	"golang.org/x/crypto/poly1305"
+	"golang.org/x/crypto/salsa20/salsa"
+)
+
+// Overhead is the number of bytes of overhead when boxing a message.
+const Overhead = poly1305.TagSize
+
+// setup produces a sub-key and Salsa20 counter given a nonce and key.
+func setup(subKey *[32]byte, counter *[16]byte, nonce *[24]byte, key *[32]byte) {
+	// We use XSalsa20 for encryption so first we need to generate a
+	// key and nonce with HSalsa20.
+	var hNonce [16]byte
+	copy(hNonce[:], nonce[:])
+	salsa.HSalsa20(subKey, &hNonce, key, &salsa.Sigma)
+
+	// The final 8 bytes of the original nonce form the new nonce.
+	copy(counter[:], nonce[16:])
+}
+
+// sliceForAppend takes a slice and a requested number of bytes. It returns a
+// slice with the contents of the given slice followed by that many bytes and a
+// second slice that aliases into it and contains only the extra bytes. If the
+// original slice has sufficient capacity then no allocation is performed.
+func sliceForAppend(in []byte, n int) (head, tail []byte) {
+	if total := len(in) + n; cap(in) >= total {
+		head = in[:total]
+	} else {
+		head = make([]byte, total)
+		copy(head, in)
+	}
+	tail = head[len(in):]
+	return
+}
+
+// Seal appends an encrypted and authenticated copy of message to out, which
+// must not overlap message. The key and nonce pair must be unique for each
+// distinct message and the output will be Overhead bytes longer than message.
+func Seal(out, message []byte, nonce *[24]byte, key *[32]byte) []byte {
+	var subKey [32]byte
+	var counter [16]byte
+	setup(&subKey, &counter, nonce, key)
+
+	// The Poly1305 key is generated by encrypting 32 bytes of zeros. Since
+	// Salsa20 works with 64-byte blocks, we also generate 32 bytes of
+	// keystream as a side effect.
+	var firstBlock [64]byte
+	salsa.XORKeyStream(firstBlock[:], firstBlock[:], &counter, &subKey)
+
+	var poly1305Key [32]byte
+	copy(poly1305Key[:], firstBlock[:])
+
+	ret, out := sliceForAppend(out, len(message)+poly1305.TagSize)
+	if subtle.AnyOverlap(out, message) {
+		panic("nacl: invalid buffer overlap")
+	}
+
+	// We XOR up to 32 bytes of message with the keystream generated from
+	// the first block.
+	firstMessageBlock := message
+	if len(firstMessageBlock) > 32 {
+		firstMessageBlock = firstMessageBlock[:32]
+	}
+
+	tagOut := out
+	out = out[poly1305.TagSize:]
+	for i, x := range firstMessageBlock {
+		out[i] = firstBlock[32+i] ^ x
+	}
+	message = message[len(firstMessageBlock):]
+	ciphertext := out
+	out = out[len(firstMessageBlock):]
+
+	// Now encrypt the rest.
+	counter[8] = 1
+	salsa.XORKeyStream(out, message, &counter, &subKey)
+
+	var tag [poly1305.TagSize]byte
+	poly1305.Sum(&tag, ciphertext, &poly1305Key)
+	copy(tagOut, tag[:])
+
+	return ret
+}
+
+// Open authenticates and decrypts a box produced by Seal and appends the
+// message to out, which must not overlap box. The output will be Overhead
+// bytes smaller than box.
+func Open(out, box []byte, nonce *[24]byte, key *[32]byte) ([]byte, bool) {
+	if len(box) < Overhead {
+		return nil, false
+	}
+
+	var subKey [32]byte
+	var counter [16]byte
+	setup(&subKey, &counter, nonce, key)
+
+	// The Poly1305 key is generated by encrypting 32 bytes of zeros. Since
+	// Salsa20 works with 64-byte blocks, we also generate 32 bytes of
+	// keystream as a side effect.
+	var firstBlock [64]byte
+	salsa.XORKeyStream(firstBlock[:], firstBlock[:], &counter, &subKey)
+
+	var poly1305Key [32]byte
+	copy(poly1305Key[:], firstBlock[:])
+	var tag [poly1305.TagSize]byte
+	copy(tag[:], box)
+
+	if !poly1305.Verify(&tag, box[poly1305.TagSize:], &poly1305Key) {
+		return nil, false
+	}
+
+	ret, out := sliceForAppend(out, len(box)-Overhead)
+	if subtle.AnyOverlap(out, box) {
+		panic("nacl: invalid buffer overlap")
+	}
+
+	// We XOR up to 32 bytes of box with the keystream generated from
+	// the first block.
+	box = box[Overhead:]
+	firstMessageBlock := box
+	if len(firstMessageBlock) > 32 {
+		firstMessageBlock = firstMessageBlock[:32]
+	}
+	for i, x := range firstMessageBlock {
+		out[i] = firstBlock[32+i] ^ x
+	}
+
+	box = box[len(firstMessageBlock):]
+	out = out[len(firstMessageBlock):]
+
+	// Now decrypt the rest.
+	counter[8] = 1
+	salsa.XORKeyStream(out, box, &counter, &subKey)
+
+	return ret, true
+}

vendor/golang.org/x/crypto/pbkdf2/pbkdf2.go

+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+/*
+Package pbkdf2 implements the key derivation function PBKDF2 as defined in RFC
+2898 / PKCS #5 v2.0.
+
+A key derivation function is useful when encrypting data based on a password
+or any other not-fully-random data. It uses a pseudorandom function to derive
+a secure encryption key based on the password.
+
+While v2.0 of the standard defines only one pseudorandom function to use,
+HMAC-SHA1, the drafted v2.1 specification allows use of all five FIPS Approved
+Hash Functions SHA-1, SHA-224, SHA-256, SHA-384 and SHA-512 for HMAC. To
+choose, you can pass the `New` functions from the different SHA packages to
+pbkdf2.Key.
+*/
+package pbkdf2 // import "golang.org/x/crypto/pbkdf2"
+
+import (
+	"crypto/hmac"
+	"hash"
+)
+
+// Key derives a key from the password, salt and iteration count, returning a
+// []byte of length keylen that can be used as cryptographic key. The key is
+// derived based on the method described as PBKDF2 with the HMAC variant using
+// the supplied hash function.
+//
+// For example, to use a HMAC-SHA-1 based PBKDF2 key derivation function, you
+// can get a derived key for e.g. AES-256 (which needs a 32-byte key) by
+// doing:
+//
+// 	dk := pbkdf2.Key([]byte("some password"), salt, 4096, 32, sha1.New)
+//
+// Remember to get a good random salt. At least 8 bytes is recommended by the
+// RFC.
+//
+// Using a higher iteration count will increase the cost of an exhaustive
+// search but will also make derivation proportionally slower.
+func Key(password, salt []byte, iter, keyLen int, h func() hash.Hash) []byte {
+	prf := hmac.New(h, password)
+	hashLen := prf.Size()
+	numBlocks := (keyLen + hashLen - 1) / hashLen
+
+	var buf [4]byte
+	dk := make([]byte, 0, numBlocks*hashLen)
+	U := make([]byte, hashLen)
+	for block := 1; block <= numBlocks; block++ {
+		// N.B.: || means concatenation, ^ means XOR
+		// for each block T_i = U_1 ^ U_2 ^ ... ^ U_iter
+		// U_1 = PRF(password, salt || uint(i))
+		prf.Reset()
+		prf.Write(salt)
+		buf[0] = byte(block >> 24)
+		buf[1] = byte(block >> 16)
+		buf[2] = byte(block >> 8)
+		buf[3] = byte(block)
+		prf.Write(buf[:4])
+		dk = prf.Sum(dk)
+		T := dk[len(dk)-hashLen:]
+		copy(U, T)
+
+		// U_n = PRF(password, U_(n-1))
+		for n := 2; n <= iter; n++ {
+			prf.Reset()
+			prf.Write(U)
+			U = U[:0]
+			U = prf.Sum(U)
+			for x := range U {
+				T[x] ^= U[x]
+			}
+		}
+	}
+	return dk[:keyLen]
+}

vendor/golang.org/x/crypto/poly1305/poly1305.go

+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+/*
+Package poly1305 implements Poly1305 one-time message authentication code as
+specified in https://cr.yp.to/mac/poly1305-20050329.pdf.
+
+Poly1305 is a fast, one-time authentication function. It is infeasible for an
+attacker to generate an authenticator for a message without the key. However, a
+key must only be used for a single message. Authenticating two different
+messages with the same key allows an attacker to forge authenticators for other
+messages with the same key.
+
+Poly1305 was originally coupled with AES in order to make Poly1305-AES. AES was
+used with a fixed key in order to generate one-time keys from an nonce.
+However, in this package AES isn't used and the one-time key is specified
+directly.
+*/
+package poly1305 // import "golang.org/x/crypto/poly1305"
+
+import "crypto/subtle"
+
+// TagSize is the size, in bytes, of a poly1305 authenticator.
+const TagSize = 16
+
+// Verify returns true if mac is a valid authenticator for m with the given
+// key.
+func Verify(mac *[16]byte, m []byte, key *[32]byte) bool {
+	var tmp [16]byte
+	Sum(&tmp, m, key)
+	return subtle.ConstantTimeCompare(tmp[:], mac[:]) == 1
+}

vendor/golang.org/x/crypto/poly1305/sum_amd64.go

+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build amd64,!gccgo,!appengine
+
+package poly1305
+
+// This function is implemented in sum_amd64.s
+//go:noescape
+func poly1305(out *[16]byte, m *byte, mlen uint64, key *[32]byte)
+
+// Sum generates an authenticator for m using a one-time key and puts the
+// 16-byte result into out. Authenticating two different messages with the same
+// key allows an attacker to forge messages at will.
+func Sum(out *[16]byte, m []byte, key *[32]byte) {
+	var mPtr *byte
+	if len(m) > 0 {
+		mPtr = &m[0]
+	}
+	poly1305(out, mPtr, uint64(len(m)), key)
+}

vendor/golang.org/x/crypto/poly1305/sum_amd64.s

+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build amd64,!gccgo,!appengine
+
+#include "textflag.h"
+
+#define POLY1305_ADD(msg, h0, h1, h2) \
+	ADDQ 0(msg), h0;  \
+	ADCQ 8(msg), h1;  \
+	ADCQ $1, h2;      \
+	LEAQ 16(msg), msg
+
+#define POLY1305_MUL(h0, h1, h2, r0, r1, t0, t1, t2, t3) \
+	MOVQ  r0, AX;                  \
+	MULQ  h0;                      \
+	MOVQ  AX, t0;                  \
+	MOVQ  DX, t1;                  \
+	MOVQ  r0, AX;                  \
+	MULQ  h1;                      \
+	ADDQ  AX, t1;                  \
+	ADCQ  $0, DX;                  \
+	MOVQ  r0, t2;                  \
+	IMULQ h2, t2;                  \
+	ADDQ  DX, t2;                  \
+	                               \
+	MOVQ  r1, AX;                  \
+	MULQ  h0;                      \
+	ADDQ  AX, t1;                  \
+	ADCQ  $0, DX;                  \
+	MOVQ  DX, h0;                  \
+	MOVQ  r1, t3;                  \
+	IMULQ h2, t3;                  \
+	MOVQ  r1, AX;                  \
+	MULQ  h1;                      \
+	ADDQ  AX, t2;                  \
+	ADCQ  DX, t3;                  \
+	ADDQ  h0, t2;                  \
+	ADCQ  $0, t3;                  \
+	                               \
+	MOVQ  t0, h0;                  \
+	MOVQ  t1, h1;                  \
+	MOVQ  t2, h2;                  \
+	ANDQ  $3, h2;                  \
+	MOVQ  t2, t0;                  \
+	ANDQ  $0xFFFFFFFFFFFFFFFC, t0; \
+	ADDQ  t0, h0;                  \
+	ADCQ  t3, h1;                  \
+	ADCQ  $0, h2;                  \
+	SHRQ  $2, t3, t2;              \
+	SHRQ  $2, t3;                  \
+	ADDQ  t2, h0;                  \
+	ADCQ  t3, h1;                  \
+	ADCQ  $0, h2
+
+DATA ·poly1305Mask<>+0x00(SB)/8, $0x0FFFFFFC0FFFFFFF
+DATA ·poly1305Mask<>+0x08(SB)/8, $0x0FFFFFFC0FFFFFFC
+GLOBL ·poly1305Mask<>(SB), RODATA, $16
+
+// func poly1305(out *[16]byte, m *byte, mlen uint64, key *[32]key)
+TEXT ·poly1305(SB), $0-32
+	MOVQ out+0(FP), DI
+	MOVQ m+8(FP), SI
+	MOVQ mlen+16(FP), R15
+	MOVQ key+24(FP), AX
+
+	MOVQ 0(AX), R11
+	MOVQ 8(AX), R12
+	ANDQ ·poly1305Mask<>(SB), R11   // r0
+	ANDQ ·poly1305Mask<>+8(SB), R12 // r1
+	XORQ R8, R8                    // h0
+	XORQ R9, R9                    // h1
+	XORQ R10, R10                  // h2
+
+	CMPQ R15, $16
+	JB   bytes_between_0_and_15
+
+loop:
+	POLY1305_ADD(SI, R8, R9, R10)
+
+multiply:
+	POLY1305_MUL(R8, R9, R10, R11, R12, BX, CX, R13, R14)
+	SUBQ $16, R15
+	CMPQ R15, $16
+	JAE  loop
+
+bytes_between_0_and_15:
+	TESTQ R15, R15
+	JZ    done
+	MOVQ  $1, BX
+	XORQ  CX, CX
+	XORQ  R13, R13
+	ADDQ  R15, SI
+
+flush_buffer:
+	SHLQ $8, BX, CX
+	SHLQ $8, BX
+	MOVB -1(SI), R13
+	XORQ R13, BX
+	DECQ SI
+	DECQ R15
+	JNZ  flush_buffer
+
+	ADDQ BX, R8
+	ADCQ CX, R9
+	ADCQ $0, R10
+	MOVQ $16, R15
+	JMP  multiply
+
+done:
+	MOVQ    R8, AX
+	MOVQ    R9, BX
+	SUBQ    $0xFFFFFFFFFFFFFFFB, AX
+	SBBQ    $0xFFFFFFFFFFFFFFFF, BX
+	SBBQ    $3, R10
+	CMOVQCS R8, AX
+	CMOVQCS R9, BX
+	MOVQ    key+24(FP), R8
+	ADDQ    16(R8), AX
+	ADCQ    24(R8), BX
+
+	MOVQ AX, 0(DI)
+	MOVQ BX, 8(DI)
+	RET

vendor/golang.org/x/crypto/poly1305/sum_arm.go

+// Copyright 2015 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build arm,!gccgo,!appengine,!nacl
+
+package poly1305
+
+// This function is implemented in sum_arm.s
+//go:noescape
+func poly1305_auth_armv6(out *[16]byte, m *byte, mlen uint32, key *[32]byte)
+
+// Sum generates an authenticator for m using a one-time key and puts the
+// 16-byte result into out. Authenticating two different messages with the same
+// key allows an attacker to forge messages at will.
+func Sum(out *[16]byte, m []byte, key *[32]byte) {
+	var mPtr *byte
+	if len(m) > 0 {
+		mPtr = &m[0]
+	}
+	poly1305_auth_armv6(out, mPtr, uint32(len(m)), key)
+}

vendor/golang.org/x/crypto/poly1305/sum_noasm.go

+// Copyright 2018 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build s390x,!go1.11 !arm,!amd64,!s390x gccgo appengine nacl
+
+package poly1305
+
+// Sum generates an authenticator for msg using a one-time key and puts the
+// 16-byte result into out. Authenticating two different messages with the same
+// key allows an attacker to forge messages at will.
+func Sum(out *[TagSize]byte, msg []byte, key *[32]byte) {
+	sumGeneric(out, msg, key)
+}

vendor/golang.org/x/crypto/poly1305/sum_ref.go

+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package poly1305
+
+import "encoding/binary"
+
+// sumGeneric generates an authenticator for msg using a one-time key and
+// puts the 16-byte result into out. This is the generic implementation of
+// Sum and should be called if no assembly implementation is available.
+func sumGeneric(out *[TagSize]byte, msg []byte, key *[32]byte) {
+	var (
+		h0, h1, h2, h3, h4 uint32 // the hash accumulators
+		r0, r1, r2, r3, r4 uint64 // the r part of the key
+	)
+
+	r0 = uint64(binary.LittleEndian.Uint32(key[0:]) & 0x3ffffff)
+	r1 = uint64((binary.LittleEndian.Uint32(key[3:]) >> 2) & 0x3ffff03)
+	r2 = uint64((binary.LittleEndian.Uint32(key[6:]) >> 4) & 0x3ffc0ff)
+	r3 = uint64((binary.LittleEndian.Uint32(key[9:]) >> 6) & 0x3f03fff)
+	r4 = uint64((binary.LittleEndian.Uint32(key[12:]) >> 8) & 0x00fffff)
+
+	R1, R2, R3, R4 := r1*5, r2*5, r3*5, r4*5
+
+	for len(msg) >= TagSize {
+		// h += msg
+		h0 += binary.LittleEndian.Uint32(msg[0:]) & 0x3ffffff
+		h1 += (binary.LittleEndian.Uint32(msg[3:]) >> 2) & 0x3ffffff
+		h2 += (binary.LittleEndian.Uint32(msg[6:]) >> 4) & 0x3ffffff
+		h3 += (binary.LittleEndian.Uint32(msg[9:]) >> 6) & 0x3ffffff
+		h4 += (binary.LittleEndian.Uint32(msg[12:]) >> 8) | (1 << 24)
+
+		// h *= r
+		d0 := (uint64(h0) * r0) + (uint64(h1) * R4) + (uint64(h2) * R3) + (uint64(h3) * R2) + (uint64(h4) * R1)
+		d1 := (d0 >> 26) + (uint64(h0) * r1) + (uint64(h1) * r0) + (uint64(h2) * R4) + (uint64(h3) * R3) + (uint64(h4) * R2)
+		d2 := (d1 >> 26) + (uint64(h0) * r2) + (uint64(h1) * r1) + (uint64(h2) * r0) + (uint64(h3) * R4) + (uint64(h4) * R3)
+		d3 := (d2 >> 26) + (uint64(h0) * r3) + (uint64(h1) * r2) + (uint64(h2) * r1) + (uint64(h3) * r0) + (uint64(h4) * R4)
+		d4 := (d3 >> 26) + (uint64(h0) * r4) + (uint64(h1) * r3) + (uint64(h2) * r2) + (uint64(h3) * r1) + (uint64(h4) * r0)
+
+		// h %= p
+		h0 = uint32(d0) & 0x3ffffff
+		h1 = uint32(d1) & 0x3ffffff
+		h2 = uint32(d2) & 0x3ffffff
+		h3 = uint32(d3) & 0x3ffffff
+		h4 = uint32(d4) & 0x3ffffff
+
+		h0 += uint32(d4>>26) * 5
+		h1 += h0 >> 26
+		h0 = h0 & 0x3ffffff
+
+		msg = msg[TagSize:]
+	}
+
+	if len(msg) > 0 {
+		var block [TagSize]byte
+		off := copy(block[:], msg)
+		block[off] = 0x01
+
+		// h += msg
+		h0 += binary.LittleEndian.Uint32(block[0:]) & 0x3ffffff
+		h1 += (binary.LittleEndian.Uint32(block[3:]) >> 2) & 0x3ffffff
+		h2 += (binary.LittleEndian.Uint32(block[6:]) >> 4) & 0x3ffffff
+		h3 += (binary.LittleEndian.Uint32(block[9:]) >> 6) & 0x3ffffff
+		h4 += (binary.LittleEndian.Uint32(block[12:]) >> 8)
+
+		// h *= r
+		d0 := (uint64(h0) * r0) + (uint64(h1) * R4) + (uint64(h2) * R3) + (uint64(h3) * R2) + (uint64(h4) * R1)
+		d1 := (d0 >> 26) + (uint64(h0) * r1) + (uint64(h1) * r0) + (uint64(h2) * R4) + (uint64(h3) * R3) + (uint64(h4) * R2)
+		d2 := (d1 >> 26) + (uint64(h0) * r2) + (uint64(h1) * r1) + (uint64(h2) * r0) + (uint64(h3) * R4) + (uint64(h4) * R3)
+		d3 := (d2 >> 26) + (uint64(h0) * r3) + (uint64(h1) * r2) + (uint64(h2) * r1) + (uint64(h3) * r0) + (uint64(h4) * R4)
+		d4 := (d3 >> 26) + (uint64(h0) * r4) + (uint64(h1) * r3) + (uint64(h2) * r2) + (uint64(h3) * r1) + (uint64(h4) * r0)
+
+		// h %= p
+		h0 = uint32(d0) & 0x3ffffff
+		h1 = uint32(d1) & 0x3ffffff
+		h2 = uint32(d2) & 0x3ffffff
+		h3 = uint32(d3) & 0x3ffffff
+		h4 = uint32(d4) & 0x3ffffff
+
+		h0 += uint32(d4>>26) * 5
+		h1 += h0 >> 26
+		h0 = h0 & 0x3ffffff
+	}
+
+	// h %= p reduction
+	h2 += h1 >> 26
+	h1 &= 0x3ffffff
+	h3 += h2 >> 26
+	h2 &= 0x3ffffff
+	h4 += h3 >> 26
+	h3 &= 0x3ffffff
+	h0 += 5 * (h4 >> 26)
+	h4 &= 0x3ffffff
+	h1 += h0 >> 26
+	h0 &= 0x3ffffff
+
+	// h - p
+	t0 := h0 + 5
+	t1 := h1 + (t0 >> 26)
+	t2 := h2 + (t1 >> 26)
+	t3 := h3 + (t2 >> 26)
+	t4 := h4 + (t3 >> 26) - (1 << 26)
+	t0 &= 0x3ffffff
+	t1 &= 0x3ffffff
+	t2 &= 0x3ffffff
+	t3 &= 0x3ffffff
+
+	// select h if h < p else h - p
+	t_mask := (t4 >> 31) - 1
+	h_mask := ^t_mask
+	h0 = (h0 & h_mask) | (t0 & t_mask)
+	h1 = (h1 & h_mask) | (t1 & t_mask)
+	h2 = (h2 & h_mask) | (t2 & t_mask)
+	h3 = (h3 & h_mask) | (t3 & t_mask)
+	h4 = (h4 & h_mask) | (t4 & t_mask)
+
+	// h %= 2^128
+	h0 |= h1 << 26
+	h1 = ((h1 >> 6) | (h2 << 20))
+	h2 = ((h2 >> 12) | (h3 << 14))
+	h3 = ((h3 >> 18) | (h4 << 8))
+
+	// s: the s part of the key
+	// tag = (h + s) % (2^128)
+	t := uint64(h0) + uint64(binary.LittleEndian.Uint32(key[16:]))
+	h0 = uint32(t)
+	t = uint64(h1) + uint64(binary.LittleEndian.Uint32(key[20:])) + (t >> 32)
+	h1 = uint32(t)
+	t = uint64(h2) + uint64(binary.LittleEndian.Uint32(key[24:])) + (t >> 32)
+	h2 = uint32(t)
+	t = uint64(h3) + uint64(binary.LittleEndian.Uint32(key[28:])) + (t >> 32)
+	h3 = uint32(t)
+
+	binary.LittleEndian.PutUint32(out[0:], h0)
+	binary.LittleEndian.PutUint32(out[4:], h1)
+	binary.LittleEndian.PutUint32(out[8:], h2)
+	binary.LittleEndian.PutUint32(out[12:], h3)
+}

vendor/golang.org/x/crypto/poly1305/sum_s390x.go

+// Copyright 2018 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build s390x,go1.11,!gccgo,!appengine
+
+package poly1305
+
+// hasVectorFacility reports whether the machine supports
+// the vector facility (vx).
+func hasVectorFacility() bool
+
+// hasVMSLFacility reports whether the machine supports
+// Vector Multiply Sum Logical (VMSL).
+func hasVMSLFacility() bool
+
+var hasVX = hasVectorFacility()
+var hasVMSL = hasVMSLFacility()
+
+// poly1305vx is an assembly implementation of Poly1305 that uses vector
+// instructions. It must only be called if the vector facility (vx) is
+// available.
+//go:noescape
+func poly1305vx(out *[16]byte, m *byte, mlen uint64, key *[32]byte)
+
+// poly1305vmsl is an assembly implementation of Poly1305 that uses vector
+// instructions, including VMSL. It must only be called if the vector facility (vx) is
+// available and if VMSL is supported.
+//go:noescape
+func poly1305vmsl(out *[16]byte, m *byte, mlen uint64, key *[32]byte)
+
+// Sum generates an authenticator for m using a one-time key and puts the
+// 16-byte result into out. Authenticating two different messages with the same
+// key allows an attacker to forge messages at will.
+func Sum(out *[16]byte, m []byte, key *[32]byte) {
+	if hasVX {
+		var mPtr *byte
+		if len(m) > 0 {
+			mPtr = &m[0]
+		}
+		if hasVMSL && len(m) > 256 {
+			poly1305vmsl(out, mPtr, uint64(len(m)), key)
+		} else {
+			poly1305vx(out, mPtr, uint64(len(m)), key)
+		}
+	} else {
+		sumGeneric(out, m, key)
+	}
+}

vendor/golang.org/x/crypto/salsa20/salsa/salsa20_amd64.go

+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build amd64,!appengine,!gccgo
+
+package salsa
+
+// This function is implemented in salsa2020_amd64.s.
+
+//go:noescape
+
+func salsa2020XORKeyStream(out, in *byte, n uint64, nonce, key *byte)
+
+// XORKeyStream crypts bytes from in to out using the given key and counters.
+// In and out must overlap entirely or not at all. Counter
+// contains the raw salsa20 counter bytes (both nonce and block counter).
+func XORKeyStream(out, in []byte, counter *[16]byte, key *[32]byte) {
+	if len(in) == 0 {
+		return
+	}
+	_ = out[len(in)-1]
+	salsa2020XORKeyStream(&out[0], &in[0], uint64(len(in)), &counter[0], &key[0])
+}

vendor/golang.org/x/crypto/salsa20/salsa20.go

+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+/*
+Package salsa20 implements the Salsa20 stream cipher as specified in https://cr.yp.to/snuffle/spec.pdf.
+
+Salsa20 differs from many other stream ciphers in that it is message orientated
+rather than byte orientated. Keystream blocks are not preserved between calls,
+therefore each side must encrypt/decrypt data with the same segmentation.
+
+Another aspect of this difference is that part of the counter is exposed as
+a nonce in each call. Encrypting two different messages with the same (key,
+nonce) pair leads to trivial plaintext recovery. This is analogous to
+encrypting two different messages with the same key with a traditional stream
+cipher.
+
+This package also implements XSalsa20: a version of Salsa20 with a 24-byte
+nonce as specified in https://cr.yp.to/snuffle/xsalsa-20081128.pdf. Simply
+passing a 24-byte slice as the nonce triggers XSalsa20.
+*/
+package salsa20 // import "golang.org/x/crypto/salsa20"
+
+// TODO(agl): implement XORKeyStream12 and XORKeyStream8 - the reduced round variants of Salsa20.
+
+import (
+	"golang.org/x/crypto/internal/subtle"
+	"golang.org/x/crypto/salsa20/salsa"
+)
+
+// XORKeyStream crypts bytes from in to out using the given key and nonce.
+// In and out must overlap entirely or not at all. Nonce must
+// be either 8 or 24 bytes long.
+func XORKeyStream(out, in []byte, nonce []byte, key *[32]byte) {
+	if len(out) < len(in) {
+		panic("salsa20: output smaller than input")
+	}
+	if subtle.InexactOverlap(out[:len(in)], in) {
+		panic("salsa20: invalid buffer overlap")
+	}
+
+	var subNonce [16]byte
+
+	if len(nonce) == 24 {
+		var subKey [32]byte
+		var hNonce [16]byte
+		copy(hNonce[:], nonce[:16])
+		salsa.HSalsa20(&subKey, &hNonce, key, &salsa.Sigma)
+		copy(subNonce[:], nonce[16:])
+		key = &subKey
+	} else if len(nonce) == 8 {
+		copy(subNonce[:], nonce[:])
+	} else {
+		panic("salsa20: nonce must be 8 or 24 bytes")
+	}
+
+	salsa.XORKeyStream(out, in, &subNonce, key)
+}

vendor/golang.org/x/crypto/ssh/doc.go

+// Copyright 2011 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+/*
+Package ssh implements an SSH client and server.
+
+SSH is a transport security protocol, an authentication protocol and a
+family of application protocols. The most typical application level
+protocol is a remote shell and this is specifically implemented.  However,
+the multiplexed nature of SSH is exposed to users that wish to support
+others.
+
+References:
+  [PROTOCOL.certkeys]: http://cvsweb.openbsd.org/cgi-bin/cvsweb/src/usr.bin/ssh/PROTOCOL.certkeys?rev=HEAD
+  [SSH-PARAMETERS]:    http://www.iana.org/assignments/ssh-parameters/ssh-parameters.xml#ssh-parameters-1
+
+This package does not fall under the stability promise of the Go language itself,
+so its API may be changed when pressing needs arise.
+*/
+package ssh // import "golang.org/x/crypto/ssh"

vendor/golang.org/x/net/bpf/setter.go

+// Copyright 2017 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package bpf
+
+// A Setter is a type which can attach a compiled BPF filter to itself.
+type Setter interface {
+	SetBPF(filter []RawInstruction) error
+}

vendor/golang.org/x/net/http2/Makefile

+curlimage:
+	docker build -t gohttp2/curl .
+

vendor/golang.org/x/net/http2/README

+This is a work-in-progress HTTP/2 implementation for Go.
+
+It will eventually live in the Go standard library and won't require
+any changes to your code to use.  It will just be automatic.
+
+Status:
+
+* The server support is pretty good. A few things are missing
+  but are being worked on.
+* The client work has just started but shares a lot of code
+  is coming along much quicker.
+
+Docs are at https://godoc.org/golang.org/x/net/http2
+
+Demo test server at https://http2.golang.org/
+
+Help & bug reports welcome!
+
+Contributing: https://golang.org/doc/contribute.html
+Bugs:         https://golang.org/issue/new?title=x/net/http2:+