Update to doxygen 1.7.5.1. Complete change of API doc layout.

git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@3978 dfc29bdd-3216-0410-991c-e03cc46cb475

scripts/doc/irrlicht/doxygen.cfg

-# Doxyfile 1.4.1
+# Doxyfile 1.7.5.1
 
 # This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project
+# doxygen (www.doxygen.org) for a project.
 #
-# All text after a hash (#) is considered a comment and will be ignored
+# All text after a hash (#) is considered a comment and will be ignored.
 # The format is:
 #       TAG = value [value, ...]
 # For lists items can also be appended using:
 #       TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (" ")
+# Values that contain spaces should be placed between quotes (" ").
 
 #---------------------------------------------------------------------------
 # Project related configuration options
 #---------------------------------------------------------------------------
 
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded 
-# by quotes) that should identify the project.
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
 
-PROJECT_NAME           = "Irrlicht Engine"
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or sequence of words) that should
+# identify the project. Note that if you do not use Doxywizard you need
+# to put quotes around the project name if it contains spaces.
+
+PROJECT_NAME           = "Irrlicht 3D Engine"
 
 # The PROJECT_NUMBER tag can be used to enter a project or revision number.
 # This could be handy for archiving the generated documentation or
@@ -25,6 +34,19 @@ PROJECT_NAME           = "Irrlicht Engine"
 
 PROJECT_NUMBER         =
 
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer
+# a quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify an logo or icon that is
+# included in the documentation. The maximum height of the logo should not
+# exceed 55 pixels and the maximum width should not exceed 200 pixels.
+# Doxygen will copy the logo to the output directory.
+
+PROJECT_LOGO           = logobig.png
+
 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
 # base path where the generated documentation will be put.
 # If a relative path is entered, it will be relative to the location
@@ -45,24 +67,15 @@ CREATE_SUBDIRS         = NO
 # documentation generated by doxygen is written. Doxygen will use this
 # information to generate all constant output in the proper language.
 # The default language is English, other supported languages are:
-# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, 
-# Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese, 
-# Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian, 
-# Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, 
-# Swedish, and Ukrainian.
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
 
 OUTPUT_LANGUAGE        = English
 
-# This tag can be used to specify the encoding used in the generated output. 
-# The encoding is not always determined by the language that is chosen, 
-# but also whether or not the output is meant for Windows or non-Windows users. 
-# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES 
-# forces the Windows encoding (this is the default for the Windows binary), 
-# whereas setting the tag to NO uses a Unix-style encoding (the default for 
-# all platforms other than Windows).
-
-USE_WINDOWS_ENCODING   = NO
-
 # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
 # include brief member descriptions after the members that are listed in
 # the file and class documentation (similar to JavaDoc).
@@ -127,7 +140,7 @@ STRIP_FROM_PATH        =
 STRIP_FROM_INC_PATH    =
 
 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
-# (but less readable) file names. This can be useful is your file systems 
+# (but less readable) file names. This can be useful if your file system
 # doesn't support long names like on DOS, Mac, or CD-ROM.
 
 SHORT_NAMES            = NO
@@ -135,11 +148,19 @@ SHORT_NAMES            = NO
 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
 # will interpret the first line (until the first dot) of a JavaDoc-style
 # comment as the brief description. If set to NO, the JavaDoc
-# comments will behave just like the Qt-style comments (thus requiring an 
-# explicit @brief command for a brief description.
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
 
 JAVADOC_AUTOBRIEF      = NO
 
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
 # treat a multi-line C++ special comment block (i.e. a block of //! or ///
 # comments) as a brief description. This used to be the default behaviour.
@@ -148,25 +169,17 @@ JAVADOC_AUTOBRIEF      = NO
 
 MULTILINE_CPP_IS_BRIEF = NO
 
-# If the DETAILS_AT_TOP tag is set to YES then Doxygen 
-# will output the detailed description near the top, like JavaDoc.
-# If set to NO, the detailed description appears after the member 
-# documentation.
-
-DETAILS_AT_TOP         = NO
-
 # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
 # member inherits the documentation from any documented member that it
 # re-implements.
 
 INHERIT_DOCS           = YES
 
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC 
-# tag is set to YES, then doxygen will reuse the documentation of the first 
-# member in the group (if any) for the other members of the group. By default 
-# all members of a group must be documented explicitly.
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
 
-DISTRIBUTE_GROUP_DOC   = NO
+SEPARATE_MEMBER_PAGES  = NO
 
 # The TAB_SIZE tag can be used to set the number of spaces in a tab.
 # Doxygen uses this value to replace tabs by spaces in code fragments.
@@ -189,13 +202,73 @@ ALIASES                =
 
 OPTIMIZE_OUTPUT_FOR_C  = NO
 
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources 
-# only. Doxygen will then generate output that is more tailored for Java. 
-# For instance, namespaces will be presented as packages, qualified scopes 
-# will look different, etc.
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
 
 OPTIMIZE_OUTPUT_JAVA   = NO
 
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also makes the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of
 # the same type (for instance a group of public functions) to be put as a
 # subgroup of that type (e.g. under the Public Functions section). Set it to
@@ -204,6 +277,48 @@ OPTIMIZE_OUTPUT_JAVA   = NO
 
 SUBGROUPING            = YES
 
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and
+# unions are shown inside the group in which they are included (e.g. using
+# @ingroup) instead of on a separate page (for HTML and Man pages) or
+# section (for LaTeX and RTF).
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and
+# unions with only public data fields will be shown inline in the documentation
+# of the scope in which they are defined (i.e. file, namespace, or group
+# documentation), provided this scope is documented. If set to NO (the default),
+# structs, classes, and unions are shown on a separate page (for HTML and Man
+# pages) or section (for LaTeX and RTF).
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penalty.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will roughly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
 #---------------------------------------------------------------------------
 # Build related configuration options
 #---------------------------------------------------------------------------
@@ -238,6 +353,14 @@ EXTRACT_LOCAL_CLASSES  = YES
 
 EXTRACT_LOCAL_METHODS  = NO
 
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespaces are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
 # undocumented members of documented classes, files or namespaces.
 # If set to NO (the default) these members will be included in the
@@ -294,6 +417,12 @@ HIDE_SCOPE_NAMES       = NO
 
 SHOW_INCLUDE_FILES     = YES
 
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
 # If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
 # is inserted in the documentation for inline members.
 
@@ -313,6 +442,22 @@ SORT_MEMBER_DOCS       = YES
 
 SORT_BRIEF_DOCS        = YES
 
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = YES
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
 # sorted by fully-qualified names, including namespaces. If set to
 # NO (the default), the class list will be sorted only by class name,
@@ -323,6 +468,15 @@ SORT_BRIEF_DOCS        = YES
 
 SORT_BY_SCOPE_NAME     = NO
 
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to
+# do proper type resolution of all parameters of a function it will reject a
+# match between the prototype and the implementation of a member function even
+# if there is only one candidate or it is obvious which candidate to choose
+# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
+# will still accept a match between prototype and implementation in such cases.
+
+STRICT_PROTO_MATCHING  = NO
+
 # The GENERATE_TODOLIST tag can be used to enable (YES) or
 # disable (NO) the todo list. This list is created by putting \todo
 # commands in the documentation.
@@ -353,10 +507,10 @@ GENERATE_DEPRECATEDLIST= YES
 ENABLED_SECTIONS       = irrlicht
 
 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines
-# the initial value of a variable or define consists of for it to appear in 
+# the initial value of a variable or macro consists of for it to appear in
 # the documentation. If the initializer consists of more lines than specified
 # here it will be hidden. Use a value of 0 to hide initializers completely.
-# The appearance of the initializer of individual variables and defines in the 
+# The appearance of the initializer of individual variables and macros in the
 # documentation can be controlled using \showinitializer or \hideinitializer
 # command in the documentation regardless of this setting.
 
@@ -370,20 +524,51 @@ SHOW_USED_FILES        = YES
 
 # If the sources in your project are distributed over multiple directories
 # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation.
+# in the documentation. The default is NO.
 
 SHOW_DIRECTORIES       = NO
 
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
 # The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from the 
-# version control system). Doxygen will invoke the program by executing (via 
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
 # popen()) the command <command> <input-file>, where <command> is the value of
 # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
-# provided by doxygen. Whatever the progam writes to standard output 
+# provided by doxygen. Whatever the program writes to standard output
 # is used as the file version. See the manual for examples.
 
 FILE_VERSION_FILTER    =
 
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files
+# containing the references data. This must be a list of .bib files. The
+# .bib extension is automatically appended if omitted. Using this command
+# requires the bibtex tool to be installed. See also
+# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style
+# of the bibliography can be controlled using LATEX_BIB_STYLE.
+
+CITE_BIB_FILES         =
+
 #---------------------------------------------------------------------------
 # configuration options related to warning and progress messages
 #---------------------------------------------------------------------------
@@ -412,7 +597,7 @@ WARN_IF_UNDOCUMENTED   = YES
 
 WARN_IF_DOC_ERROR      = YES
 
-# This WARN_NO_PARAMDOC option can be abled to get warnings for 
+# The WARN_NO_PARAMDOC option can be enabled to get warnings for
 # functions that are documented, but have no documentation for their parameters
 # or return value. If set to NO (the default) doxygen will only warn about
 # wrong or incomplete parameter documentation, but not about the absence of
@@ -444,14 +629,24 @@ WARN_LOGFILE           =
 # directories like "/usr/src/myproject". Separate the files or directories
 # with spaces.
 
-INPUT                  = ../../../include/ tut.txt
+INPUT                  = ../../../include/ \
+                         tut.txt
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
 
 # If the value of the INPUT tag contains directories, you can use the
 # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
 # and *.h) to filter out the source-files in the directories. If left
 # blank the following patterns are tested:
-# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx 
-# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm
+# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh
+# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
+# *.f90 *.f *.for *.vhd *.vhdl
 
 FILE_PATTERNS          = *.h \
                          *.cpp
@@ -465,21 +660,32 @@ RECURSIVE              = NO
 # The EXCLUDE tag can be used to specify files and/or directories that should
 # excluded from the INPUT source files. This way you can easily exclude a
 # subdirectory from a directory tree whose root is specified with the INPUT tag.
+# Note that relative paths are relative to directory from which doxygen is run.
 
 EXCLUDE                = YES
 
 # The EXCLUDE_SYMLINKS tag can be used select whether or not files or
-# directories that are symbolic links (a Unix filesystem feature) are excluded 
+# directories that are symbolic links (a Unix file system feature) are excluded
 # from the input.
 
 EXCLUDE_SYMLINKS       = NO
 
 # If the value of the INPUT tag contains directories, you can use the
 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
 
 EXCLUDE_PATTERNS       =
 
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
 # The EXAMPLE_PATH tag can be used to specify one or more files or
 # directories that contain example code fragments that are included (see
 # the \include command).
@@ -511,17 +717,20 @@ IMAGE_PATH             = ../../../media
 # by executing (via popen()) the command <filter> <input-file>, where <filter>
 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
 # input file. Doxygen will then use the output that the filter program writes
-# to standard output.  If FILTER_PATTERNS is specified, this tag will be 
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
 # ignored.
 
 INPUT_FILTER           =
 
 # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis.  Doxygen will compare the file name with each pattern and apply the 
-# filter if there is a match.  The filters are a list of the form: 
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
 # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
-# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER 
-# is applied to all files.
+# info on how filters are used. If FILTER_PATTERNS is empty or if
+# non of the patterns match the file name, INPUT_FILTER is applied.
 
 FILTER_PATTERNS        =
 
@@ -531,6 +740,14 @@ FILTER_PATTERNS        =
 
 FILTER_SOURCE_FILES    = NO
 
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any)
+# and it is also possible to disable source filtering for a specific pattern
+# using *.ext= (so without naming a filter). This option only has effect when
+# FILTER_SOURCE_FILES is enabled.
+
+FILTER_SOURCE_PATTERNS =
+
 #---------------------------------------------------------------------------
 # configuration options related to source browsing
 #---------------------------------------------------------------------------
@@ -553,18 +770,34 @@ INLINE_SOURCES         = NO
 
 STRIP_CODE_COMMENTS    = YES
 
-# If the REFERENCED_BY_RELATION tag is set to YES (the default) 
+# If the REFERENCED_BY_RELATION tag is set to YES
 # then for each documented function all documented
 # functions referencing it will be listed.
 
 REFERENCED_BY_RELATION = YES
 
-# If the REFERENCES_RELATION tag is set to YES (the default) 
+# If the REFERENCES_RELATION tag is set to YES
 # then for each documented function all documented entities
 # called/used by that function will be listed.
 
 REFERENCES_RELATION    = YES
 
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
 # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
 # will generate a verbatim copy of the header file for each class for
 # which an include is specified. Set to NO to disable this.
@@ -617,7 +850,14 @@ HTML_FILE_EXTENSION    = .html
 
 # The HTML_HEADER tag can be used to specify a personal HTML header for
 # each generated HTML page. If it is left blank doxygen will generate a
-# standard header.
+# standard header. Note that when using a custom header you are responsible
+#  for the proper inclusion of any scripts and style sheets that doxygen
+# needs, which is dependent on the configuration options used.
+# It is adviced to generate a default header using "doxygen -w html
+# header.html footer.html stylesheet.css YourConfigFile" and then modify
+# that header. Note that the header is subject to change so you typically
+# have to redo this when upgrading to a newer version of doxygen or when
+# changing the value of configuration settings such as GENERATE_TREEVIEW!
 
 HTML_HEADER            = header.html
 
@@ -636,15 +876,100 @@ HTML_FOOTER            = footer.html
 
 HTML_STYLESHEET        = doxygen.css
 
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that
+# the files will be copied as-is; there are no commands or markers available.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 237
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
 # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
 # files or namespaces will be aligned in HTML using tables. If set to
 # NO a bullet list will be used.
 
-HTML_ALIGN_MEMBERS     = YES
+HTML_ALIGN_MEMBERS     = NO
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
 
 # If the GENERATE_HTMLHELP tag is set to YES, additional index files
 # will be generated that can be used as input for tools like the
-# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) 
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
 # of the generated HTML documentation.
 
 GENERATE_HTMLHELP      = NO
@@ -661,7 +986,7 @@ CHM_FILE               = irrlicht.chm
 # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
 # the HTML help compiler on the generated index.hhp.
 
-HHC_LOCATION           = C:\Development\irrlicht\scripts\doc\hhc.exe
+HHC_LOCATION           = ..\hhc.exe
 
 # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
 # controls if a separate .chi index file is generated (YES) or that
@@ -669,6 +994,12 @@ HHC_LOCATION           = C:\Development\irrlicht\scripts\doc\hhc.exe
 
 GENERATE_CHI           = NO
 
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
 # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
 # controls whether a binary table of contents is generated (YES) or a
 # normal table of contents (NO) in the .chm file.
@@ -680,25 +1011,103 @@ BINARY_TOC             = NO
 
 TOC_EXPAND             = YES
 
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
 # The DISABLE_INDEX tag can be used to turn on/off the condensed index at
 # top of each HTML page. The value NO (the default) enables the index and
 # the value YES disables it.
 
 DISABLE_INDEX          = YES
 
-# This tag can be used to set the number of enum values (range [1..20]) 
-# that doxygen will group on one line in the generated HTML documentation.
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
+# (range [0,1..20]) that doxygen will group on one line in the generated HTML
+# documentation. Note that a value of 0 will completely suppress the enum
+# values from appearing in the overview section.
 
 ENUM_VALUES_PER_LINE   = 4
 
-# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
-# generated containing a tree-like index structure (just like the one that 
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
 # is generated for HTML Help). For this to work a browser that supports
-# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, 
-# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are 
-# probably better off using the HTML help feature.
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = YES
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
 
-GENERATE_TREEVIEW      = NO
+USE_INLINE_TREES       = NO
 
 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
 # used to set the initial width (in pixels) of the frame in which the tree
@@ -706,6 +1115,72 @@ GENERATE_TREEVIEW      = NO
 
 TREEVIEW_WIDTH         = 250
 
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
+# (see http://www.mathjax.org) which uses client side Javascript for the
+# rendering instead of using prerendered bitmaps. Use this if you do not
+# have LaTeX installed or if you want to formulas look prettier in the HTML
+# output. When enabled you also need to install MathJax separately and
+# configure the path to it using the MATHJAX_RELPATH option.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you need to specify the location relative to the
+# HTML output directory using the MATHJAX_RELPATH option. The destination
+# directory should contain the MathJax.js script. For instance, if the mathjax
+# directory is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the
+# mathjax.org site, so you can quickly see the result without installing
+# MathJax, but it is strongly recommended to install a local copy of MathJax
+# before deployment.
+
+MATHJAX_RELPATH        = http://www.mathjax.org/mathjax
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension
+# names that should be enabled during MathJax rendering.
+
+MATHJAX_EXTENSIONS     =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvantages are that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
 #---------------------------------------------------------------------------
 # configuration options related to the LaTeX output
 #---------------------------------------------------------------------------
@@ -723,6 +1198,9 @@ LATEX_OUTPUT           = latex
 
 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
 # invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
 
 LATEX_CMD_NAME         = latex
 
@@ -739,7 +1217,7 @@ MAKEINDEX_CMD_NAME     = makeindex
 COMPACT_LATEX          = NO
 
 # The PAPER_TYPE tag can be used to set the paper type that is used
-# by the printer. Possible values are: a4, a4wide, letter, legal and 
+# by the printer. Possible values are: a4, letter, legal and
 # executive. If left blank a4wide will be used.
 
 PAPER_TYPE             = a4wide
@@ -756,6 +1234,13 @@ EXTRA_PACKAGES         =
 
 LATEX_HEADER           =
 
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for
+# the generated latex document. The footer should contain everything after
+# the last chapter. If it is left blank doxygen will generate a
+# standard footer. Notice: only use this tag if you know what you are doing!
+
+LATEX_FOOTER           =
+
 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
 # is prepared for conversion to pdf (using ps2pdf). The pdf file will
 # contain links (just like the HTML output) instead of page references
@@ -782,6 +1267,19 @@ LATEX_BATCHMODE        = NO
 
 LATEX_HIDE_INDICES     = NO
 
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See
+# http://en.wikipedia.org/wiki/BibTeX for more info.
+
+LATEX_BIB_STYLE        = plain
+
 #---------------------------------------------------------------------------
 # configuration options related to the RTF output
 #---------------------------------------------------------------------------
@@ -918,8 +1416,10 @@ GENERATE_PERLMOD       = NO
 PERLMOD_LATEX          = NO
 
 # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
-# nicely formatted so it can be parsed by a human reader.  This is useful 
-# if you want to understand what is going on.  On the other hand, if this 
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
 # tag is set to NO the size of the Perl module output will be much smaller
 # and Perl will parse it just the same.
 
@@ -951,12 +1451,12 @@ MACRO_EXPANSION        = NO
 
 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
 # then the macro expansion is limited to the macros specified with the
-# PREDEFINED and EXPAND_AS_PREDEFINED tags.
+# PREDEFINED and EXPAND_AS_DEFINED tags.
 
 EXPAND_ONLY_PREDEF     = NO
 
 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
-# in the INCLUDE_PATH (see below) will be search if a #include is found.
+# pointed to by INCLUDE_PATH will be searched when a #include is found.
 
 SEARCH_INCLUDES        = YES
 
@@ -986,15 +1486,15 @@ PREDEFINED             =
 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
 # this tag can be used to specify a list of macro names that should be expanded.
 # The macro definition that is found in the sources will be used.
-# Use the PREDEFINED tag if you want to use a different macro definition.
+# Use the PREDEFINED tag if you want to use a different macro definition that
+# overrules the definition found in the source code.
 
 EXPAND_AS_DEFINED      =
 
 # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
-# doxygen's preprocessor will remove all function-like macros that are alone 
-# on a line, have an all uppercase name, and do not end with a semicolon. Such 
-# function macros are typically used for boiler-plate code, and will confuse 
-# the parser if not removed.
+# doxygen's preprocessor will remove all references to function-like macros
+# that are alone on a line, have an all uppercase name, and do not end with a
+# semicolon, because these will confuse the parser if not removed.
 
 SKIP_FUNCTION_MACROS   = YES
 
@@ -1006,8 +1506,10 @@ SKIP_FUNCTION_MACROS   = YES
 # Optionally an initial location of the external documentation
 # can be added for each tagfile. The format of a tag file without
 # this location is as follows:
+#
 # TAGFILES = file1 file2 ...
 # Adding location for the tag files is done as follows:
+#
 # TAGFILES = file1=loc1 "file2 = loc2" ...
 # where "loc1" and "loc2" can be relative or absolute paths or
 # URLs. If a location is present for each tag, the installdox tool
@@ -1048,12 +1550,20 @@ PERL_PATH              = /usr/bin/perl
 # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
 # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
 # or super classes. Setting the tag to NO turns the diagrams off. Note that
-# this option is superseded by the HAVE_DOT option below. This is only a 
-# fallback. It is recommended to install and use dot, since it yields more 
-# powerful graphs.
+# this option also works with HAVE_DOT disabled, but it is recommended to
+# install and use dot, since it yields more powerful graphs.
 
 CLASS_DIAGRAMS         = YES
 
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
 # If set to YES, the inheritance and collaboration graphs will hide
 # inheritance and usage relations if the target is undocumented
 # or is not a class.
@@ -1067,6 +1577,34 @@ HIDE_UNDOC_RELATIONS   = YES
 
 HAVE_DOT               = NO
 
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will use the Helvetica font for all dot files that
+# doxygen generates. When you want a differently looking font you can specify
+# the font name using DOT_FONTNAME. You need to make sure dot is able to find
+# the font, which can be done by putting it in a standard location or by setting
+# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
+# directory containing the font.
+
+DOT_FONTNAME           = Helvetica
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the Helvetica font.
+# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to
+# set the path where dot can find it.
+
+DOT_FONTPATH           =
+
 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
 # will generate a graph for each documented class showing the direct and
 # indirect inheritance relations. Setting this tag to YES will force the
@@ -1111,16 +1649,24 @@ INCLUDE_GRAPH          = YES
 
 INCLUDED_BY_GRAPH      = YES
 
-# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will 
-# generate a call dependency graph for every global function or class method. 
-# Note that enabling this option will significantly increase the time of a run. 
-# So in most cases it will be better to enable call graphs for selected 
-# functions only using the \callgraph command.
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
 
 CALL_GRAPH             = NO
 
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
-# will graphical hierarchy of all classes instead of a textual one.
+# will generate a graphical hierarchy of all classes instead of a textual one.
 
 GRAPHICAL_HIERARCHY    = YES
 
@@ -1132,11 +1678,22 @@ GRAPHICAL_HIERARCHY    = YES
 DIRECTORY_GRAPH        = YES
 
 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot. Possible values are png, jpg, or gif
-# If left blank png will be used.
+# generated by dot. Possible values are svg, png, jpg, or gif.
+# If left blank png will be used. If you choose svg you need to set
+# HTML_FILE_EXTENSION to xhtml in order to make the SVG files
+# visible in IE 9+ (other browsers do not have this requirement).
 
 DOT_IMAGE_FORMAT       = png
 
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+# Note that this requires a modern browser other than Internet Explorer.
+# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you
+# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files
+# visible. Older versions of IE do not have SVG support.
+
+INTERACTIVE_SVG        = NO
+
 # The tag DOT_PATH can be used to specify the path where the dot tool can be
 # found. If left blank, it is assumed the dot tool can be found in the path.
 
@@ -1148,39 +1705,37 @@ DOT_PATH               =
 
 DOTFILE_DIRS           =
 
-# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width 
-# (in pixels) of the graphs generated by dot. If a graph becomes larger than 
-# this value, doxygen will try to truncate the graph, so that it fits within 
-# the specified constraint. Beware that most browsers cannot cope with very 
-# large images.
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the
+# \mscfile command).
 
-MAX_DOT_GRAPH_WIDTH    = 1024
+MSCFILE_DIRS           =
 
-# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height 
-# (in pixels) of the graphs generated by dot. If a graph becomes larger than 
-# this value, doxygen will try to truncate the graph, so that it fits within 
-# the specified constraint. Beware that most browsers cannot cope with very 
-# large images.
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
 
-MAX_DOT_GRAPH_HEIGHT   = 1024
+DOT_GRAPH_MAX_NODES    = 50
 
 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
 # graphs generated by dot. A depth value of 3 means that only nodes reachable
 # from the root by following a path via at most 3 edges will be shown. Nodes
 # that lay further from the root node will be omitted. Note that setting this
 # option to 1 or 2 may greatly reduce the computation time needed for large
-# code bases. Also note that a graph may be further truncated if the graph's 
-# image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH 
-# and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default), 
-# the graph is not depth-constrained.
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
 
 MAX_DOT_GRAPH_DEPTH    = 0
 
 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, which results in a white background. 
-# Warning: Depending on the platform used, enabling this option may lead to 
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to 
-# read).
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
 
 DOT_TRANSPARENT        = NO
 
@@ -1202,12 +1757,3 @@ GENERATE_LEGEND        = YES
 # the various graphs.
 
 DOT_CLEANUP            = YES
-
-#---------------------------------------------------------------------------
-# Configuration::additions related to the search engine   
-#---------------------------------------------------------------------------
-
-# The SEARCHENGINE tag specifies whether or not a search engine should be 
-# used. If set to NO the values of all tags below this one will be ignored.
-
-SEARCHENGINE           = NO

scripts/doc/irrlicht/doxygen.css

-table.irrlicht {
-	width: 100%;
-	background-color: #9395C1;
-	text-align: center;
-	margin: 0px;
-	padding: 0px;
-	border-spacing: 4px 2px;
-	border-color: #b0b0b0;
-	border-width: 1px;
-	border-style: solid;
+/* The standard CSS for doxygen */
+
+body, table, div, p, dl {
+	font-family: Lucida Grande, Verdana, Geneva, Arial, sans-serif;
+	font-size: 12px;
 }
 
-table.memname { 
-     background-color: #f5f5f5;
-     border: 1px solid #b0b0b0;
+/* @group Heading Levels */
+
+h1 {
+	font-size: 150%;
 }
 
-BODY,H1,H2,H3,H4,H5,H6,P,CENTER,TD,TH,UL,DL,DIV {
-	font-family: Geneva, Arial, Helvetica, sans-serif;
+.title {
+	font-size: 150%;
+	font-weight: bold;
+	margin: 10px 2px;
 }
-BODY,TD {
-       font-size: 90%;
+
+h2 {
+	font-size: 120%;
 }
-H1 {
-	text-align: center;
-       font-size: 160%;
+
+h3 {
+	font-size: 100%;
 }
-H2 {
-       font-size: 120%;
+
+dt {
+	font-weight: bold;
 }
-H3 {
-       font-size: 110%;
+
+div.multicol {
+	-moz-column-gap: 1em;
+	-webkit-column-gap: 1em;
+	-moz-column-count: 3;
+	-webkit-column-count: 3;
 }
-CAPTION { font-weight: bold }
-DIV.qindex {
-	width: 100%;
-	background-color: #eeeeff;
-	border: 1px solid #b0b0b0;
+
+p.startli, p.startdd, p.starttd {
+	margin-top: 2px;
+}
+
+p.endli {
+	margin-bottom: 0px;
+}
+
+p.enddd {
+	margin-bottom: 4px;
+}
+
+p.endtd {
+	margin-bottom: 2px;
+}
+
+/* @end */
+
+caption {
+	font-weight: bold;
+}
+
+span.legend {
+        font-size: 70%;
         text-align: center;
-	margin: 2px;
-	padding: 2px;
-	line-height: 140%;
 }
-DIV.nav {
-	width: 100%;
-	background-color: #eeeeff;
-	border: 1px solid #b0b0b0;
+
+h3.version {
+        font-size: 90%;
         text-align: center;
-	margin: 2px;
-	padding: 2px;
+}
+
+div.qindex, div.navtab{
+	background-color: #EBEFF6;
+	border: 1px solid #A3B4D7;
+	text-align: center;
+}
+
+div.qindex, div.navpath {
+	width: 100%;
 	line-height: 140%;
 }
-A.qindex {
-       text-decoration: none;
-       font-weight: bold;
-       color: #1A419D;
+
+div.navtab {
+	margin-right: 15px;
 }
-A.qindex:visited {
+
+/* @group Link Styling */
+
+a {
+	color: #3D578C;
+	font-weight: normal;
 	text-decoration: none;
-       font-weight: bold;
-       color: #1A419D
 }
-A.qindex:hover {
-	text-decoration: none;
-	background-color: #ddddff;
+
+.contents a:visited {
+	color: #4665A2;
 }
-A.qindexHL {
-	text-decoration: none;
+
+a:hover {
+	text-decoration: underline;
+}
+
+a.qindex {
+	font-weight: bold;
+}
+
+a.qindexHL {
 	font-weight: bold;
-	background-color: #6666cc;
+	background-color: #9CAFD4;
 	color: #ffffff;
-	border: 1px double #9295C2;
+	border: 1px double #869DCA;
 }
-A.qindexHL:hover {
-	text-decoration: none;
-	background-color: #6666cc;
+
+.contents a.qindexHL:visited {
         color: #ffffff;
 }
-A.qindexHL:visited { text-decoration: none; background-color: #6666cc; color: #ffffff }
-A.el { text-decoration: none; font-weight: bold }
-A.elRef { font-weight: bold }
-A.code:link { text-decoration: none; font-weight: normal; color: #0000FF}
-A.code:visited { text-decoration: none; font-weight: normal; color: #0000FF}
-A.codeRef:link { font-weight: normal; color: #0000FF}
-A.codeRef:visited { font-weight: normal; color: #0000FF}
-A:hover { text-decoration: none; background-color: #f2f2ff }
-DL.el { margin-left: -1cm }
+
+a.el {
+	font-weight: bold;
+}
+
+a.elRef {
+}
+
+a.code {
+	color: #4665A2;
+}
+
+a.codeRef {
+	color: #4665A2;
+}
+
+/* @end */
+
+dl.el {
+	margin-left: -1cm;
+}
+
 .fragment {
-       font-family: monospace
+	font-family: monospace, fixed;
+	font-size: 105%;
 }
-PRE.fragment {
-	border: 1px solid #CCCCCC;
-	background-color: #f5f5f5;
-	margin-top: 4px;
-	margin-bottom: 4px;
-	margin-left: 2px;
-	margin-right: 8px;
-	padding-left: 6px;
-	padding-right: 6px;
-	padding-top: 4px;
-	padding-bottom: 4px;
+
+pre.fragment {
+	border: 1px solid #C4CFE5;
+	background-color: #FBFCFD;
+	padding: 4px 6px;
+	margin: 4px 8px 4px 2px;
+	overflow: auto;
+	word-wrap: break-word;
+	font-size:  9pt;
+	line-height: 125%;
 }
-DIV.ah { background-color: black; font-weight: bold; color: #ffffff; margin-bottom: 3px; margin-top: 3px }
-TD.md { background-color: #F4F4FB; font-weight: bold; }
-TD.mdPrefix {
-       background-color: #F4F4FB;
-       color: #606060;
-	font-size: 80%;
+
+div.ah {
+	background-color: black;
+	font-weight: bold;
+	color: #ffffff;
+	margin-bottom: 3px;
+	margin-top: 3px;
+	padding: 0.2em;
+	border: solid thin #333;
+	border-radius: 0.5em;
+	-webkit-border-radius: .5em;
+	-moz-border-radius: .5em;
+	box-shadow: 2px 2px 3px #999;
+	-webkit-box-shadow: 2px 2px 3px #999;
+	-moz-box-shadow: rgba(0, 0, 0, 0.15) 2px 2px 2px;
+	background-image: -webkit-gradient(linear, left top, left bottom, from(#eee), to(#000),color-stop(0.3, #444));
+	background-image: -moz-linear-gradient(center top, #eee 0%, #444 40%, #000);
 }
-TD.mdname1 { background-color: #F4F4FB; font-weight: bold; color: #602020; }
-TD.mdname { background-color: #F4F4FB; font-weight: bold; color: #602020; width: 600px; }
-DIV.groupHeader {
+
+div.groupHeader {
 	margin-left: 16px;
 	margin-top: 12px;
-       margin-bottom: 6px;
 	font-weight: bold;
 }
-DIV.groupText { margin-left: 16px; font-style: italic; font-size: 90% }
-BODY {
-	background: white;
+
+div.groupText {
+	margin-left: 16px;
+	font-style: italic;
+}
+
+body {
+	background-color: white;
 	color: black;
-	margin-right: 20px;
-	margin-left: 20px;
+        margin: 0;
+}
+
+div.contents {
+	margin-top: 10px;
+	margin-left: 8px;
+	margin-right: 8px;
 }
-TD.indexkey {
-	background-color: #eeeeff;
+
+td.indexkey {
+	background-color: #EBEFF6;
 	font-weight: bold;
-	padding-right  : 10px;
-	padding-top    : 2px;
-	padding-left   : 10px;
-	padding-bottom : 2px;
-	margin-left    : 0px;
-	margin-right   : 0px;
-	margin-top     : 2px;
-	margin-bottom  : 2px;
-	border: 1px solid #CCCCCC;
-}
-TD.indexvalue {
-	background-color: #eeeeff;
-	font-style: italic;
-	padding-right  : 10px;
-	padding-top    : 2px;
-	padding-left   : 10px;
-	padding-bottom : 2px;
-	margin-left    : 0px;
-	margin-right   : 0px;
-	margin-top     : 2px;
-	margin-bottom  : 2px;
-	border: 1px solid #CCCCCC;
-}
-TR.memlist {
-   background-color: #f0f0f0; 
-}
-P.formulaDsp { text-align: center; }
-IMG.formulaDsp { }
-IMG.formulaInl { vertical-align: middle; }
-SPAN.keyword       { color: #008000 }
-SPAN.keywordtype   { color: #604020 }
-SPAN.keywordflow   { color: #e08000 }
-SPAN.comment       { color: #800000 }
-SPAN.preprocessor  { color: #806020 }
-SPAN.stringliteral { color: #002080 }
-SPAN.charliteral   { color: #008080 }
-.mdTable {
-	border: 1px solid #868686;
-	background-color: #F4F4FB;
-}
-.mdRow {
-	padding: 8px 10px;
-}
-.mdescLeft {
+	border: 1px solid #C4CFE5;
+	margin: 2px 0px 2px 0;
+	padding: 2px 10px;
+}
+
+td.indexvalue {
+	background-color: #EBEFF6;
+	border: 1px solid #C4CFE5;
+	padding: 2px 10px;
+	margin: 2px 0px;
+}
+
+tr.memlist {
+	background-color: #EEF1F7;
+}
+
+p.formulaDsp {
+	text-align: center;
+}
+
+img.formulaDsp {
+	
+}
+
+img.formulaInl {
+	vertical-align: middle;
+}
+
+div.center {
+	text-align: center;
+        margin-top: 0px;
+        margin-bottom: 0px;
+        padding: 0px;
+}
+
+div.center img {
+	border: 0px;
+}
+
+address.footer {
+	text-align: right;
+	padding-right: 12px;
+}
+
+img.footer {
+	border: 0px;
+	vertical-align: middle;
+}
+
+/* @group Code Colorization */
+
+span.keyword {
+	color: #008000
+}
+
+span.keywordtype {
+	color: #604020
+}
+
+span.keywordflow {
+	color: #e08000
+}
+
+span.comment {
+	color: #800000
+}
+
+span.preprocessor {
+	color: #806020
+}
+
+span.stringliteral {
+	color: #002080
+}
+
+span.charliteral {
+	color: #008080
+}
+
+span.vhdldigit { 
+	color: #ff00ff 
+}
+
+span.vhdlchar { 
+	color: #000000 
+}
+
+span.vhdlkeyword { 
+	color: #700070 
+}
+
+span.vhdllogic { 
+	color: #ff0000 
+}
+
+/* @end */
+
+/*
+.search {
+	color: #003399;
+	font-weight: bold;
+}
+
+form.search {
+	margin-bottom: 0px;
+	margin-top: 0px;
+}
+
+input.search {
+	font-size: 75%;
+	color: #000080;
+	font-weight: normal;
+	background-color: #e8eef2;
+}
+*/
+
+td.tiny {
+	font-size: 75%;
+}
+
+.dirtab {
+	padding: 4px;
+	border-collapse: collapse;
+	border: 1px solid #A3B4D7;
+}
+
+th.dirtab {
+	background: #EBEFF6;
+	font-weight: bold;
+}
+
+hr {
+	height: 0px;
+	border: none;
+	border-top: 1px solid #4A6AAA;
+}
+
+hr.footer {
+	height: 1px;
+}
+
+/* @group Member Descriptions */
+
+table.memberdecls {
+	border-spacing: 0px;
+	padding: 0px;
+}
+
+.mdescLeft, .mdescRight,
+.memItemLeft, .memItemRight,
+.memTemplItemLeft, .memTemplItemRight, .memTemplParams {
+	background-color: #F9FAFC;
+	border: none;
+	margin: 4px;
+	padding: 1px 0 0 8px;
+}
+
+.mdescLeft, .mdescRight {
 	padding: 0px 8px 4px 8px;
+	color: #555;
+}
+
+.memItemLeft, .memItemRight, .memTemplParams {
+	border-top: 1px solid #C4CFE5;
+}
+
+.memItemLeft, .memTemplItemLeft {
+        white-space: nowrap;
+}
+
+.memItemRight {
+	width: 100%;
+}
+
+.memTemplParams {
+	color: #4665A2;
+        white-space: nowrap;
+}
+
+/* @end */
+
+/* @group Member Details */
+
+/* Styles for detailed member documentation */
+
+.memtemplate {
 	font-size: 80%;
+	color: #4665A2;
+	font-weight: normal;
+	margin-left: 9px;
+}
+
+.memnav {
+	background-color: #EBEFF6;
+	border: 1px solid #A3B4D7;
+	text-align: center;
+	margin: 2px;
+	margin-right: 15px;
+	padding: 2px;
+}
+
+.mempage {
+	width: 100%;
+}
+
+.memitem {
+	padding: 0;
+	margin-bottom: 10px;
+	margin-right: 5px;
+}
+
+.memname {
+        white-space: nowrap;
+        font-weight: bold;
+        margin-left: 6px;
+}
+
+.memproto, dl.reflist dt {
+        border-top: 1px solid #A8B8D9;
+        border-left: 1px solid #A8B8D9;
+        border-right: 1px solid #A8B8D9;
+        padding: 6px 0px 6px 0px;
+        color: #253555;
+        font-weight: bold;
+        text-shadow: 0px 1px 1px rgba(255, 255, 255, 0.9);
+        /* opera specific markup */
+        box-shadow: 5px 5px 5px rgba(0, 0, 0, 0.15);
+        border-top-right-radius: 8px;
+        border-top-left-radius: 8px;
+        /* firefox specific markup */
+        -moz-box-shadow: rgba(0, 0, 0, 0.15) 5px 5px 5px;
+        -moz-border-radius-topright: 8px;
+        -moz-border-radius-topleft: 8px;
+        /* webkit specific markup */
+        -webkit-box-shadow: 5px 5px 5px rgba(0, 0, 0, 0.15);
+        -webkit-border-top-right-radius: 8px;
+        -webkit-border-top-left-radius: 8px;
+        background-image:url('nav_f.png');
+        background-repeat:repeat-x;
+        background-color: #E2E8F2;
+
+}
+
+.memdoc, dl.reflist dd {
+        border-bottom: 1px solid #A8B8D9;      
+        border-left: 1px solid #A8B8D9;      
+        border-right: 1px solid #A8B8D9; 
+        padding: 2px 5px;
+        background-color: #FBFCFD;
+        border-top-width: 0;
+        /* opera specific markup */
+        border-bottom-left-radius: 8px;
+        border-bottom-right-radius: 8px;
+        box-shadow: 5px 5px 5px rgba(0, 0, 0, 0.15);
+        /* firefox specific markup */
+        -moz-border-radius-bottomleft: 8px;
+        -moz-border-radius-bottomright: 8px;
+        -moz-box-shadow: rgba(0, 0, 0, 0.15) 5px 5px 5px;
+        background-image: -moz-linear-gradient(center top, #FFFFFF 0%, #FFFFFF 60%, #F7F8FB 95%, #EEF1F7);
+        /* webkit specific markup */
+        -webkit-border-bottom-left-radius: 8px;
+        -webkit-border-bottom-right-radius: 8px;
+        -webkit-box-shadow: 5px 5px 5px rgba(0, 0, 0, 0.15);
+        background-image: -webkit-gradient(linear,center top,center bottom,from(#FFFFFF), color-stop(0.6,#FFFFFF), color-stop(0.60,#FFFFFF), color-stop(0.95,#F7F8FB), to(#EEF1F7));
+}
+
+dl.reflist dt {
+        padding: 5px;
+}
+
+dl.reflist dd {
+        margin: 0px 0px 10px 0px;
+        padding: 5px;
+}
+
+.paramkey {
+	text-align: right;
+}
+
+.paramtype {
+	white-space: nowrap;
+}
+
+.paramname {
+	color: #602020;
+	white-space: nowrap;
+}
+.paramname em {
+	font-style: normal;
+}
+
+.params, .retval, .exception, .tparams {
+        border-spacing: 6px 2px;
+}       
+
+.params .paramname, .retval .paramname {
+        font-weight: bold;
+        vertical-align: top;
+}
+        
+.params .paramtype {
         font-style: italic;
-	background-color: #FAFAFA;
-	border-top: 1px none #E0E0E0;
-	border-right: 1px none #E0E0E0;
-	border-bottom: 1px none #E0E0E0;
-	border-left: 1px none #E0E0E0;
+        vertical-align: top;
+}       
+        
+.params .paramdir {
+        font-family: "courier new",courier,monospace;
+        vertical-align: top;
+}
+
+
+
+
+/* @end */
+
+/* @group Directory (tree) */
+
+/* for the tree view */
+
+.ftvtree {
+	font-family: sans-serif;
 	margin: 0px;
 }
-.mdescRight {
-       padding: 0px 8px 4px 8px;
-	font-size: 80%;
-	font-style: italic;
-	background-color: #FAFAFA;
-	border-top: 1px none #E0E0E0;
-	border-right: 1px none #E0E0E0;
-	border-bottom: 1px none #E0E0E0;
-	border-left: 1px none #E0E0E0;
+
+/* these are for tree view when used as main index */
+
+.directory {
+	font-size: 9pt;
+	font-weight: bold;
+	margin: 5px;
+}
+
+.directory h3 {
 	margin: 0px;
+	margin-top: 1em;
+	font-size: 11pt;
 }
-.memItemLeft {
-	padding: 1px 0px 0px 8px;
-	margin: 4px;
-	border-top-width: 1px;
-	border-right-width: 1px;
-	border-bottom-width: 1px;
-	border-left-width: 1px;
-	border-top-color: #E0E0E0;
-	border-right-color: #E0E0E0;
-	border-bottom-color: #E0E0E0;
-	border-left-color: #E0E0E0;
-	border-top-style: solid;
-	border-right-style: none;
-	border-bottom-style: none;
-	border-left-style: none;
-	background-color: #FAFAFA;
-	font-size: 80%;
+
+/*
+The following two styles can be used to replace the root node title
+with an image of your choice.  Simply uncomment the next two styles,
+specify the name of your image and be sure to set 'height' to the
+proper pixel height of your image.
+*/
+
+/*
+.directory h3.swap {
+	height: 61px;
+	background-repeat: no-repeat;
+	background-image: url("yourimage.gif");
 }
-.memItemRight {
-	padding: 1px 8px 0px 8px;
-	margin: 4px;
-	border-top-width: 1px;
-	border-right-width: 1px;
-	border-bottom-width: 1px;
-	border-left-width: 1px;
-	border-top-color: #E0E0E0;
-	border-right-color: #E0E0E0;
-	border-bottom-color: #E0E0E0;
-	border-left-color: #E0E0E0;
-	border-top-style: solid;
-	border-right-style: none;
-	border-bottom-style: none;
-	border-left-style: none;
-	background-color: #FAFAFA;
-	font-size: 80%;
+.directory h3.swap span {
+	display: none;
 }
-.memTemplItemLeft {
-	padding: 1px 0px 0px 8px;
-	margin: 4px;
-	border-top-width: 1px;
-	border-right-width: 1px;
-	border-bottom-width: 1px;
-	border-left-width: 1px;
-	border-top-color: #E0E0E0;
-	border-right-color: #E0E0E0;
-	border-bottom-color: #E0E0E0;
-	border-left-color: #E0E0E0;
-	border-top-style: none;
-	border-right-style: none;
-	border-bottom-style: none;
-	border-left-style: none;
-	background-color: #FAFAFA;
-	font-size: 80%;
+*/
+
+.directory > h3 {
+	margin-top: 0;
 }
-.memTemplItemRight {
-	padding: 1px 8px 0px 8px;
-	margin: 4px;
-	border-top-width: 1px;
-	border-right-width: 1px;
-	border-bottom-width: 1px;
-	border-left-width: 1px;
-	border-top-color: #E0E0E0;
-	border-right-color: #E0E0E0;
-	border-bottom-color: #E0E0E0;
-	border-left-color: #E0E0E0;
-	border-top-style: none;
-	border-right-style: none;
-	border-bottom-style: none;
-	border-left-style: none;
-	background-color: #FAFAFA;
-	font-size: 80%;
+
+.directory p {
+	margin: 0px;
+	white-space: nowrap;
 }
-.memTemplParams {
-	padding: 1px 0px 0px 8px;
-	margin: 4px;
-	border-top-width: 1px;
-	border-right-width: 1px;
-	border-bottom-width: 1px;
-	border-left-width: 1px;
-	border-top-color: #E0E0E0;
-	border-right-color: #E0E0E0;
-	border-bottom-color: #E0E0E0;
-	border-left-color: #E0E0E0;
-	border-top-style: solid;
-	border-right-style: none;
-	border-bottom-style: none;
-	border-left-style: none;
-       color: #606060;
-	background-color: #FAFAFA;
-	font-size: 80%;
+
+.directory div {
+	display: none;
+	margin: 0px;
+}
+
+.directory img {
+	vertical-align: -30%;
 }
-.search     { color: #003399;
+
+/* these are for tree view when not used as main index */
+
+.directory-alt {
+	font-size: 100%;
 	font-weight: bold;
 }
-FORM.search {
-              margin-bottom: 0px;
-              margin-top: 0px;
+
+.directory-alt h3 {
+	margin: 0px;
+	margin-top: 1em;
+	font-size: 11pt;
 }
-INPUT.search { font-size: 75%;
-               color: #000080;
-               font-weight: normal;
-               background-color: #eeeeff;
+
+.directory-alt > h3 {
+	margin-top: 0;
 }
-TD.tiny      { font-size: 75%;
+
+.directory-alt p {
+	margin: 0px;
+	white-space: nowrap;
 }
-a {
-	color: #252E78;
+
+.directory-alt div {
+	display: none;
+	margin: 0px;
 }
-a:visited {
-	color: #3D2185;
+
+.directory-alt img {
+	vertical-align: -30%;
 }
-.dirtab { padding: 4px;
-          border-collapse: collapse;
-          border: 1px solid #b0b0b0;
+
+/* @end */
+
+div.dynheader {
+        margin-top: 8px;
+}
+
+address {
+	font-style: normal;
+	color: #2A3D61;
+}
+
+table.doxtable {
+	border-collapse:collapse;
+}
+
+table.doxtable td, table.doxtable th {
+	border: 1px solid #2D4068;
+	padding: 3px 7px 2px;
+}
+
+table.doxtable th {
+	background-color: #374F7F;
+	color: #FFFFFF;
+	font-size: 110%;
+	padding-bottom: 4px;
+	padding-top: 5px;
+	text-align:left;
+}
+
+table.fieldtable {
+        width: 100%;
+        margin-bottom: 10px;
+        border: 1px solid #A8B8D9;
+        border-spacing: 0px;
+        -moz-border-radius: 4px;
+        -webkit-border-radius: 4px;
+        border-radius: 4px;
+        -moz-box-shadow: rgba(0, 0, 0, 0.15) 2px 2px 2px;
+        -webkit-box-shadow: 2px 2px 2px rgba(0, 0, 0, 0.15);
+        box-shadow: 2px 2px 2px rgba(0, 0, 0, 0.15);
 }
-TH.dirtab { background: #eeeeff;
+
+.fieldtable td, .fieldtable th {
+        padding: 3px 7px 2px;
+}
+
+.fieldtable td.fieldtype, .fieldtable td.fieldname {
+        white-space: nowrap;
+        border-right: 1px solid #A8B8D9;
+        border-bottom: 1px solid #A8B8D9;
+        vertical-align: top;
+}
+
+.fieldtable td.fielddoc {
+        border-bottom: 1px solid #A8B8D9;
+        width: 100%;
+}
+
+.fieldtable tr:last-child td {
+        border-bottom: none;
+}
+
+.fieldtable th {
+        background-image:url('nav_f.png');
+        background-repeat:repeat-x;
+        background-color: #E2E8F2;
+        font-size: 90%;
+        color: #253555;
+        padding-bottom: 4px;
+        padding-top: 5px;
+        text-align:left;
+        -moz-border-radius-topleft: 4px;
+        -moz-border-radius-topright: 4px;
+        -webkit-border-top-left-radius: 4px;
+        -webkit-border-top-right-radius: 4px;
+        border-top-left-radius: 4px;
+        border-top-right-radius: 4px;
+        border-bottom: 1px solid #A8B8D9;
+}
+
+
+.tabsearch {
+	top: 0px;
+	left: 10px;
+	height: 36px;
+	background-image: url('tab_b.png');
+	z-index: 101;
+	overflow: hidden;
+	font-size: 13px;
+}
+
+.navpath ul
+{
+	font-size: 11px;
+	background-image:url('tab_b.png');
+	background-repeat:repeat-x;
+	height:30px;
+	line-height:30px;
+	color:#8AA0CC;
+	border:solid 1px #C2CDE4;
+	overflow:hidden;
+	margin:0px;
+	padding:0px;
+}
+
+.navpath li
+{
+	list-style-type:none;
+	float:left;
+	padding-left:10px;
+	padding-right:15px;
+	background-image:url('bc_s.png');
+	background-repeat:no-repeat;
+	background-position:right;
+	color:#364D7C;
+}
+
+.navpath li.navelem a
+{
+	height:32px;
+	display:block;
+	text-decoration: none;
+	outline: none;
+}
+
+.navpath li.navelem a:hover
+{
+	color:#6884BD;
+}
+
+.navpath li.footer
+{
+        list-style-type:none;
+        float:right;
+        padding-left:10px;
+        padding-right:15px;
+        background-image:none;
+        background-repeat:no-repeat;
+        background-position:right;
+        color:#364D7C;
+        font-size: 8pt;
+}
+
+
+div.summary
+{
+	float: right;
+	font-size: 8pt;
+	padding-right: 5px;
+	width: 50%;
+	text-align: right;
+}       
+
+div.summary a
+{
+	white-space: nowrap;
+}
+
+div.ingroups
+{
+	margin-left: 5px;
+	font-size: 8pt;
+	padding-left: 5px;
+	width: 50%;
+	text-align: left;
+}
+
+div.ingroups a
+{
+	white-space: nowrap;
+}
+
+div.header
+{
+        background-image:url('nav_h.png');
+        background-repeat:repeat-x;
+	background-color: #F9FAFC;
+	margin:  0px;
+	border-bottom: 1px solid #C4CFE5;
+}
+
+div.headertitle
+{
+	padding: 5px 5px 5px 7px;
+}
+
+dl
+{
+        padding: 0 0 0 10px;
+}
+
+dl.note, dl.warning, dl.attention, dl.pre, dl.post, dl.invariant, dl.deprecated, dl.todo, dl.test, dl.bug
+{
+        border-left:4px solid;
+        padding: 0 0 0 6px;
+}
+
+dl.note
+{
+        border-color: #D0C000;
+}
+
+dl.warning, dl.attention
+{
+        border-color: #FF0000;
+}
+
+dl.pre, dl.post, dl.invariant
+{
+        border-color: #00D000;
+}
+
+dl.deprecated
+{
+        border-color: #505050;
+}
+
+dl.todo
+{
+        border-color: #00C0E0;
+}
+
+dl.test
+{
+        border-color: #3030E0;
+}
+
+dl.bug
+{
+        border-color: #C08050;
+}
+
+#projectlogo
+{
+	text-align: center;
+	vertical-align: bottom;
+	border-collapse: separate;
+}
+ 
+#projectlogo img
+{ 
+	border: 0px none;
+}
+ 
+#projectname
+{
+	font: 300% Tahoma, Arial,sans-serif;
+	margin: 0px;
+	padding: 2px 0px;
+}
+    
+#projectbrief
+{
+	font: 120% Tahoma, Arial,sans-serif;
+	margin: 0px;
+	padding: 0px;
+}
+
+#projectnumber
+{
+	font: 50% Tahoma, Arial,sans-serif;
+	margin: 0px;
+	padding: 0px;
+}
+
+#titlearea
+{
+	padding: 0px;
+	margin: 0px;
+	width: 100%;
+	border-bottom: 1px solid #5373B4;
+}
+
+.image
+{
+        text-align: center;
+}
+
+.dotgraph
+{
+        text-align: center;
+}
+
+.mscgraph
+{
+        text-align: center;
+}
+
+.caption
+{
 	font-weight: bold;
 }
-HR { height: 1px;
-     border: none;
-     border-top: 1px solid black;
+
+div.zoom
+{
+	border: 1px solid #90A5CE;
+}
+
+dl.citelist {
+        margin-bottom:50px;
+}
+
+dl.citelist dt {
+        color:#334975;
+        float:left;
+        font-weight:bold;
+        margin-right:10px;
+        padding:5px;
+}
+
+dl.citelist dd {
+        margin:2px 0;
+        padding:5px 0;
 }
+
+@media print
+{
+  #top { display: none; }
+  #side-nav { display: none; }
+  #nav-path { display: none; }
+  body { overflow:visible; }
+  h1, h2, h3, h4, h5, h6 { page-break-after: avoid; }
+  .summary { display: none; }
+  .memitem { page-break-inside: avoid; }
+  #doc-content
+  {
+    margin-left:0 !important;
+    height:auto !important;
+    width:auto !important;
+    overflow:inherit;
+    display:inline;
+  }
+  pre.fragment
+  {
+    overflow: visible;
+    text-wrap: unrestricted;
+    white-space: -moz-pre-wrap; /* Moz */
+    white-space: -pre-wrap; /* Opera 4-6 */
+    white-space: -o-pre-wrap; /* Opera 7 */
+    white-space: pre-wrap; /* CSS3  */
+    word-wrap: break-word; /* IE 5.5+ */
+  }
+}
+

scripts/doc/irrlicht/footer.html

-<hr size="1">
-<address style="align: right;">
-<small> </small>
-</address>
-<table width="100%" border="0" cellspacing="0" cellpadding="2">
-  <tr> 
-    <td width="0"> <div align="left"><small><a href="http://irrlicht.sourceforge.net" target="_blank"><img src="irrlicht.png" alt="The Irrlicht Engine" align="middle" border=0 width=88 height=31></a></small></div></td>
-    <td> <div align="left"><small><em><font size="2">The <a href="http://irrlicht.sourceforge.net" target="_blank">Irrlicht 
-        Engine</a> Documentation &copy; 2003-2010 by Nikolaus Gebhardt. Generated 
-        on $datetime by <a href="http://www.doxygen.org" target="_blank">Doxygen</a> 
-        ($doxygenversion)</font></em></small></div></td>
-  </tr>
-</table>
-<address style="align: right;">
-</address>
+<!--BEGIN GENERATE_TREEVIEW-->
+    <li class="footer">
+<a href="http://irrlicht.sourceforge.net" target="_blank">Irrlicht 
+Engine</a> Documentation &copy; 2003-2011 by Nikolaus Gebhardt. Generated
+on $datetime by <a href="http://www.doxygen.org/index.html" target="_blank">Doxygen</a> ($doxygenversion)
+</li>
+   </ul>
+ </div>
+<!--END GENERATE_TREEVIEW-->
+<!--BEGIN !GENERATE_TREEVIEW-->
+<hr class="footer"/>
+<address class="footer">
+<small>
+<a href="http://irrlicht.sourceforge.net" target="_blank">Irrlicht 
+Engine</a> Documentation &copy; 2003-2011 by Nikolaus Gebhardt. Generated
+on $datetime by <a href="http://www.doxygen.org/index.html" target="_blank">Doxygen</a> ($doxygenversion)
+</small></address>
+<!--END !GENERATE_TREEVIEW-->
 </body>
 </html>

scripts/doc/irrlicht/header.html

-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<html><head><meta http-equiv="Content-Type" content="text/html;charset=iso-8859-1">
-<title>$title</title>
-<link href="doxygen.css" rel="stylesheet" type="text/css">
-</head><body>
-<table class="irrlicht" >
-  <tr valign="middle"> 
-    <td><font size="2"><a class="qindex" href="index.html"><font color="#FFFFFF">Home</font></a> 
-      | <a class="qindex" href="namespaces.html"><font color="#FFFFFF">Namespaces</font></a> 
-      | <a class="qindex" href="hierarchy.html"><font color="#FFFFFF">Hierarchy</font></a> 
-      | <a class="qindex" href="classes.html"><font color="#FFFFFF">Alphabetical 
-      List</font></a> | <a class="qindex" href="annotated.html"><font color="#FFFFFF"> 
-      Class list</font></a> | <a class="qindex" href="files.html"><font color="#FFFFFF">Files</font></a> 
-      | <a class="qindex" href="namespacemembers.html"><font color="#FFFFFF"> 
-      Namespace&nbsp;Members</font></a> | <a class="qindex" href="functions.html"><font color="#FFFFFF">Class 
-      members</font></a> | <a class="qindex" href="globals.html"><font color="#FFFFFF">File 
-      members</font></a> | <a class="qindex" href="pages.html"><font color="#FFFFFF">Tutorials</font></a></font> </td>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
+<!--BEGIN PROJECT_NAME--><title>$projectname: $title</title><!--END PROJECT_NAME-->
+<!--BEGIN !PROJECT_NAME--><title>$title</title><!--END !PROJECT_NAME-->
+<link href="doxygen.css" rel="stylesheet" type="text/css" />
+$treeview
+$search
+$mathjax
+</head>
+<body>
+<div id="top"><!-- do not remove this div! -->
+
+<!--BEGIN TITLEAREA-->
+<div id="titlearea">
+<table cellspacing="0" cellpadding="0">
+ <tbody>
+ <tr style="height: 56px;">
+  <!--BEGIN PROJECT_LOGO-->
+  <td id="projectlogo"><img alt="Logo" src="$relpath$$projectlogo"/></td>
+  <!--END PROJECT_LOGO-->
+  <!--BEGIN PROJECT_NAME-->
+  <td style="padding-left: 0.5em;">
+   <div id="projectname">$projectname
+   <!--BEGIN PROJECT_NUMBER-->&#160;<span id="projectnumber">$projectnumber</span><!--END PROJECT_NUMBER-->
+   </div>
+   <!--BEGIN PROJECT_BRIEF--><div id="projectbrief">$projectbrief</div><!--END PROJECT_BRIEF-->
+  </td>
+  <!--END PROJECT_NAME-->
+  <!--BEGIN !PROJECT_NAME-->
+   <!--BEGIN PROJECT_BRIEF-->
+    <td style="padding-left: 0.5em;">
+    <div id="projectbrief">$projectbrief</div>
+    </td>
+   <!--END PROJECT_BRIEF-->
+  <!--END !PROJECT_NAME-->
+  <!--BEGIN DISABLE_INDEX-->
+   <!--BEGIN SEARCHENGINE-->
+   <td>$searchbox</td>
+   <!--END SEARCHENGINE-->
+  <!--END DISABLE_INDEX-->
  </tr>
+ </tbody>
 </table>
+</div>
+<!--END TITLEAREA-->