Add LZMA decompression (7zip compatible, without 7zip archive support).

Change bzip2 code to NO_STDIO to save some space.
Add some more flags to allow for system version of bzip2 etc.

git-svn-id: svn://svn.code.sf.net/p/irrlicht/code/trunk@3006 dfc29bdd-3216-0410-991c-e03cc46cb475

include/IrrCompileConfig.h

@@ -168,18 +168,6 @@ disable this feature, the engine behave as before (ansi). This is currently only
 for Windows based systems. */
 //#define _IRR_WCHAR_FILESYSTEM
 
-//! Define _IRR_COMPILE_WITH_ZLIB_ to enable compiling the engine using zlib.
-/** This enables the engine to read from compressed .zip archives. If you
-disable this feature, the engine can still read archives, but only uncompressed
-ones. */
-#define _IRR_COMPILE_WITH_ZLIB_
-
-//! Define _IRR_USE_NON_SYSTEM_ZLIB_ to let irrlicht use the zlib which comes with irrlicht.
-/** If this is commented out, Irrlicht will try to compile using the zlib installed in the system.
-	This is only used when _IRR_COMPILE_WITH_ZLIB_ is defined. */
-#define _IRR_USE_NON_SYSTEM_ZLIB_
-
-
 //! Define _IRR_COMPILE_WITH_JPEGLIB_ to enable compiling the engine using libjpeg.
 /** This enables the engine to read jpeg images. If you comment this out,
 the engine will no longer read .jpeg images. */
@@ -348,12 +336,37 @@ B3D, MS3D or X meshes */
 #define _IRR_COMPILE_WITH_TGA_WRITER_
 
 //! Define __IRR_COMPILE_WITH_ZIP_ARCHIVE_LOADER_ if you want to open ZIP and GZIP archives
+/** ZIP reading has several more options below to configure. */
 #define __IRR_COMPILE_WITH_ZIP_ARCHIVE_LOADER_
 #ifdef __IRR_COMPILE_WITH_ZIP_ARCHIVE_LOADER_
+//! Define _IRR_COMPILE_WITH_ZLIB_ to enable compiling the engine using zlib.
+/** This enables the engine to read from compressed .zip archives. If you
+disable this feature, the engine can still read archives, but only uncompressed
+ones. */
+#define _IRR_COMPILE_WITH_ZLIB_
+//! Define _IRR_USE_NON_SYSTEM_ZLIB_ to let irrlicht use the zlib which comes with irrlicht.
+/** If this is commented out, Irrlicht will try to compile using the zlib
+installed on the system. This is only used when _IRR_COMPILE_WITH_ZLIB_ is
+defined. */
+#define _IRR_USE_NON_SYSTEM_ZLIB_
 //! Define _IRR_COMPILE_WITH_ZIP_ENCRYPTION_ if you want to read AES-encrypted ZIP archives
 #define _IRR_COMPILE_WITH_ZIP_ENCRYPTION_
+//! Define _IRR_COMPILE_WITH_BZIP2_ if you want to support bzip2 compressed zip archives
+/** bzip2 is superior to the original zip file compression modes, but requires 
+a certain amount of memory for decompression and adds several files to the
+library. */
 #define _IRR_COMPILE_WITH_BZIP2_
+//! Define _IRR_USE_NON_SYSTEM_BZLIB_ to let irrlicht use the bzlib which comes with irrlicht.
+/** If this is commented out, Irrlicht will try to compile using the bzlib
+installed on the system. This is only used when _IRR_COMPILE_WITH_BZLIB_ is
+defined. */
+#define _IRR_USE_NON_SYSTEM_BZLIB_
+//! Define _IRR_COMPILE_WITH_LZMA_ if you want to use LZMA compressed zip files.
+/** LZMA is a very efficient compression code, known from 7zip. Irrlicht
+currently only supports zip archives, though. */
+#define _IRR_COMPILE_WITH_LZMA_
 #endif
+
 //! Define __IRR_COMPILE_WITH_MOUNT_ARCHIVE_LOADER_ if you want to mount folders as archives
 #define __IRR_COMPILE_WITH_MOUNT_ARCHIVE_LOADER_
 //! Define __IRR_COMPILE_WITH_PAK_ARCHIVE_LOADER_ if you want to open ID software PAK archives

source/Irrlicht/CZipReader.cpp

@@ -23,8 +23,23 @@
 	#include "aesGladman/fileenc.h"
 	#endif
 	#ifdef _IRR_COMPILE_WITH_BZIP2_
+	#ifndef _IRR_USE_NON_SYSTEM_BZLIB_
+	#include <bzlib.h>
+	#else
 	#include "bzip2/bzlib.h"
 	#endif
+	#endif
+	#ifdef _IRR_COMPILE_WITH_LZMA_
+	#include "lzma/LzmaDec.h"
+	#endif
+#endif
+
+#ifdef BZ_NO_STDIO
+// This method is used for error output from bzip2.
+extern "C" void bz_internal_error(int errorCode)
+{
+	irr::os::Printer::log("Error in bzip2 handling", irr::core::stringc(errorCode), irr::ELL_ERROR);
+}
 #endif
 
 namespace irr
@@ -348,7 +363,7 @@ bool CZipReader::scanGZipHeader()
 		os::Byteswap::byteswap(entry.header.DataDescriptor.UncompressedSize);
 #endif
 
-		//! now we've filled all the fields, this is just a standard deflate block
+		// now we've filled all the fields, this is just a standard deflate block
 		addItem(ZipFileName, entry.header.DataDescriptor.UncompressedSize, false, 0);
 		FileInfo.push_back(entry);
 	}
@@ -475,11 +490,18 @@ IReadFile* CZipReader::createAndOpenFile(const io::path& filename)
 	return 0;
 }
 
+//! Used for LZMA decompression. The lib has no default memory management
+namespace
+{
+	void *SzAlloc(void *p, size_t size) { p = p; return malloc(size); }
+	void SzFree(void *p, void *address) { p = p; free(address); }
+	ISzAlloc lzmaAlloc = { SzAlloc, SzFree };
+}
 
 //! opens a file by index
 IReadFile* CZipReader::createAndOpenFile(u32 index)
 {
-	// Irrlicht supports 0, 8, 12, 99
+	// Irrlicht supports 0, 8, 12, 14, 99
 	//0 - The file is stored (no compression)
 	//1 - The file is Shrunk
 	//2 - The file is Reduced with compression factor 1
@@ -736,6 +758,67 @@ IReadFile* CZipReader::createAndOpenFile(u32 index)
 			return 0;
 			#endif
 		}
+	case 14:
+		{
+  			#ifdef _IRR_COMPILE_WITH_LZMA_
+
+			u32 uncompressedSize = e.header.DataDescriptor.UncompressedSize;
+			c8* pBuf = new c8[ uncompressedSize ];
+			if (!pBuf)
+			{
+				swprintf ( buf, 64, L"Not enough memory for decompressing %s", Files[index].FullName.c_str() );
+				os::Printer::log( buf, ELL_ERROR);
+				if (decrypted)
+					decrypted->drop();
+				return 0;
+			}
+
+			u8 *pcData = decryptedBuf;
+			if (!pcData)
+			{
+				pcData = new u8[decryptedSize];
+				if (!pcData)
+				{
+					swprintf ( buf, 64, L"Not enough memory for decompressing %s", Files[index].FullName.c_str() );
+					os::Printer::log( buf, ELL_ERROR);
+					delete [] pBuf;
+					return 0;
+				}
+
+				//memset(pcData, 0, decryptedSize);
+				File->seek(e.Offset);
+				File->read(pcData, decryptedSize);
+			}
+
+			ELzmaStatus status;
+			SizeT tmpDstSize = uncompressedSize;
+			SizeT tmpSrcSize = decryptedSize;
+
+			int err = LzmaDecode((Byte*)pBuf, &tmpDstSize,
+					pcData, &tmpSrcSize,
+					0, 0, LZMA_FINISH_END, &status, &lzmaAlloc);
+			uncompressedSize = tmpDstSize; // may be different to expected value
+
+			if (decrypted)
+				decrypted->drop();
+			else
+				delete[] pcData;
+
+			if (err != SZ_OK)
+			{
+				swprintf ( buf, 64, L"Error decompressing %s", Files[index].FullName.c_str() );
+				os::Printer::log( buf, ELL_ERROR);
+				delete [] pBuf;
+				return 0;
+			}
+			else
+				return io::createMemoryReadFile(pBuf, uncompressedSize, Files[index].FullName, true);
+
+			#else
+			os::Printer::log("lzma decompression not supported. File cannot be read.", ELL_ERROR);
+			return 0;
+			#endif
+		}
 	case 99:
 		// If we come here with an encrypted file, decryption support is missing
 		os::Printer::log("Decryption support not enabled. File cannot be read.", ELL_ERROR);

source/Irrlicht/Irrlicht9.0.vcproj

@@ -2622,6 +2622,18 @@
 				<Filter
 					Name="extern"
 					>
+					<File
+						RelativePath=".\lzma\LzmaDec.c"
+						>
+					</File>
+					<File
+						RelativePath=".\lzma\LzmaDec.h"
+						>
+					</File>
+					<File
+						RelativePath=".\lzma\Types.h"
+						>
+					</File>
 					<Filter
 						Name="zlib"
 						>

source/Irrlicht/bzip2/bzlib.h

@@ -26,6 +26,9 @@
 extern "C" {
 #endif
 
+// we don't need the FILE* interface
+#define BZ_NO_STDIO
+
 #define BZ_RUN               0
 #define BZ_FLUSH             1
 #define BZ_FINISH            2

source/Irrlicht/lzma/LzmaDec.c

+/* LzmaDec.c -- LZMA Decoder
+2008-11-06 : Igor Pavlov : Public domain */
+
+#include "LzmaDec.h"
+
+#include <string.h>
+
+#define kNumTopBits 24
+#define kTopValue ((UInt32)1 << kNumTopBits)
+
+#define kNumBitModelTotalBits 11
+#define kBitModelTotal (1 << kNumBitModelTotalBits)
+#define kNumMoveBits 5
+
+#define RC_INIT_SIZE 5
+
+#define NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | (*buf++); }
+
+#define IF_BIT_0(p) ttt = *(p); NORMALIZE; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
+#define UPDATE_0(p) range = bound; *(p) = (CLzmaProb)(ttt + ((kBitModelTotal - ttt) >> kNumMoveBits));
+#define UPDATE_1(p) range -= bound; code -= bound; *(p) = (CLzmaProb)(ttt - (ttt >> kNumMoveBits));
+#define GET_BIT2(p, i, A0, A1) IF_BIT_0(p) \
+  { UPDATE_0(p); i = (i + i); A0; } else \
+  { UPDATE_1(p); i = (i + i) + 1; A1; }
+#define GET_BIT(p, i) GET_BIT2(p, i, ; , ;)
+
+#define TREE_GET_BIT(probs, i) { GET_BIT((probs + i), i); }
+#define TREE_DECODE(probs, limit, i) \
+  { i = 1; do { TREE_GET_BIT(probs, i); } while (i < limit); i -= limit; }
+
+/* #define _LZMA_SIZE_OPT */
+
+#ifdef _LZMA_SIZE_OPT
+#define TREE_6_DECODE(probs, i) TREE_DECODE(probs, (1 << 6), i)
+#else
+#define TREE_6_DECODE(probs, i) \
+  { i = 1; \
+  TREE_GET_BIT(probs, i); \
+  TREE_GET_BIT(probs, i); \
+  TREE_GET_BIT(probs, i); \
+  TREE_GET_BIT(probs, i); \
+  TREE_GET_BIT(probs, i); \
+  TREE_GET_BIT(probs, i); \
+  i -= 0x40; }
+#endif
+
+#define NORMALIZE_CHECK if (range < kTopValue) { if (buf >= bufLimit) return DUMMY_ERROR; range <<= 8; code = (code << 8) | (*buf++); }
+
+#define IF_BIT_0_CHECK(p) ttt = *(p); NORMALIZE_CHECK; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
+#define UPDATE_0_CHECK range = bound;
+#define UPDATE_1_CHECK range -= bound; code -= bound;
+#define GET_BIT2_CHECK(p, i, A0, A1) IF_BIT_0_CHECK(p) \
+  { UPDATE_0_CHECK; i = (i + i); A0; } else \
+  { UPDATE_1_CHECK; i = (i + i) + 1; A1; }
+#define GET_BIT_CHECK(p, i) GET_BIT2_CHECK(p, i, ; , ;)
+#define TREE_DECODE_CHECK(probs, limit, i) \
+  { i = 1; do { GET_BIT_CHECK(probs + i, i) } while (i < limit); i -= limit; }
+
+
+#define kNumPosBitsMax 4
+#define kNumPosStatesMax (1 << kNumPosBitsMax)
+
+#define kLenNumLowBits 3
+#define kLenNumLowSymbols (1 << kLenNumLowBits)
+#define kLenNumMidBits 3
+#define kLenNumMidSymbols (1 << kLenNumMidBits)
+#define kLenNumHighBits 8
+#define kLenNumHighSymbols (1 << kLenNumHighBits)
+
+#define LenChoice 0
+#define LenChoice2 (LenChoice + 1)
+#define LenLow (LenChoice2 + 1)
+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
+#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
+
+
+#define kNumStates 12
+#define kNumLitStates 7
+
+#define kStartPosModelIndex 4
+#define kEndPosModelIndex 14
+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
+
+#define kNumPosSlotBits 6
+#define kNumLenToPosStates 4
+
+#define kNumAlignBits 4
+#define kAlignTableSize (1 << kNumAlignBits)
+
+#define kMatchMinLen 2
+#define kMatchSpecLenStart (kMatchMinLen + kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
+
+#define IsMatch 0
+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
+#define IsRepG0 (IsRep + kNumStates)
+#define IsRepG1 (IsRepG0 + kNumStates)
+#define IsRepG2 (IsRepG1 + kNumStates)
+#define IsRep0Long (IsRepG2 + kNumStates)
+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
+#define LenCoder (Align + kAlignTableSize)
+#define RepLenCoder (LenCoder + kNumLenProbs)
+#define Literal (RepLenCoder + kNumLenProbs)
+
+#define LZMA_BASE_SIZE 1846
+#define LZMA_LIT_SIZE 768
+
+#define LzmaProps_GetNumProbs(p) ((UInt32)LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((p)->lc + (p)->lp)))
+
+#if Literal != LZMA_BASE_SIZE
+StopCompilingDueBUG
+#endif
+
+static const Byte kLiteralNextStates[kNumStates * 2] =
+{
+  0, 0, 0, 0, 1, 2, 3,  4,  5,  6,  4,  5,
+  7, 7, 7, 7, 7, 7, 7, 10, 10, 10, 10, 10
+};
+
+#define LZMA_DIC_MIN (1 << 12)
+
+/* First LZMA-symbol is always decoded.
+And it decodes new LZMA-symbols while (buf < bufLimit), but "buf" is without last normalization
+Out:
+  Result:
+    SZ_OK - OK
+    SZ_ERROR_DATA - Error
+  p->remainLen:
+    < kMatchSpecLenStart : normal remain
+    = kMatchSpecLenStart : finished
+    = kMatchSpecLenStart + 1 : Flush marker
+    = kMatchSpecLenStart + 2 : State Init Marker
+*/
+
+static int MY_FAST_CALL LzmaDec_DecodeReal(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
+{
+  CLzmaProb *probs = p->probs;
+
+  unsigned state = p->state;
+  UInt32 rep0 = p->reps[0], rep1 = p->reps[1], rep2 = p->reps[2], rep3 = p->reps[3];
+  unsigned pbMask = ((unsigned)1 << (p->prop.pb)) - 1;
+  unsigned lpMask = ((unsigned)1 << (p->prop.lp)) - 1;
+  unsigned lc = p->prop.lc;
+
+  Byte *dic = p->dic;
+  SizeT dicBufSize = p->dicBufSize;
+  SizeT dicPos = p->dicPos;
+  
+  UInt32 processedPos = p->processedPos;
+  UInt32 checkDicSize = p->checkDicSize;
+  unsigned len = 0;
+
+  const Byte *buf = p->buf;
+  UInt32 range = p->range;
+  UInt32 code = p->code;
+
+  do
+  {
+    CLzmaProb *prob;
+    UInt32 bound;
+    unsigned ttt;
+    unsigned posState = processedPos & pbMask;
+
+    prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
+    IF_BIT_0(prob)
+    {
+      unsigned symbol;
+      UPDATE_0(prob);
+      prob = probs + Literal;
+      if (checkDicSize != 0 || processedPos != 0)
+        prob += (LZMA_LIT_SIZE * (((processedPos & lpMask) << lc) +
+        (dic[(dicPos == 0 ? dicBufSize : dicPos) - 1] >> (8 - lc))));
+
+      if (state < kNumLitStates)
+      {
+        symbol = 1;
+        do { GET_BIT(prob + symbol, symbol) } while (symbol < 0x100);
+      }
+      else
+      {
+        unsigned matchByte = p->dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
+        unsigned offs = 0x100;
+        symbol = 1;
+        do
+        {
+          unsigned bit;
+          CLzmaProb *probLit;
+          matchByte <<= 1;
+          bit = (matchByte & offs);
+          probLit = prob + offs + bit + symbol;
+          GET_BIT2(probLit, symbol, offs &= ~bit, offs &= bit)
+        }
+        while (symbol < 0x100);
+      }
+      dic[dicPos++] = (Byte)symbol;
+      processedPos++;
+
+      state = kLiteralNextStates[state];
+      /* if (state < 4) state = 0; else if (state < 10) state -= 3; else state -= 6; */
+      continue;
+    }
+    else
+    {
+      UPDATE_1(prob);
+      prob = probs + IsRep + state;
+      IF_BIT_0(prob)
+      {
+        UPDATE_0(prob);
+        state += kNumStates;
+        prob = probs + LenCoder;
+      }
+      else
+      {
+        UPDATE_1(prob);
+        if (checkDicSize == 0 && processedPos == 0)
+          return SZ_ERROR_DATA;
+        prob = probs + IsRepG0 + state;
+        IF_BIT_0(prob)
+        {
+          UPDATE_0(prob);
+          prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
+          IF_BIT_0(prob)
+          {
+            UPDATE_0(prob);
+            dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
+            dicPos++;
+            processedPos++;
+            state = state < kNumLitStates ? 9 : 11;
+            continue;
+          }
+          UPDATE_1(prob);
+        }
+        else
+        {
+          UInt32 distance;
+          UPDATE_1(prob);
+          prob = probs + IsRepG1 + state;
+          IF_BIT_0(prob)
+          {
+            UPDATE_0(prob);
+            distance = rep1;
+          }
+          else
+          {
+            UPDATE_1(prob);
+            prob = probs + IsRepG2 + state;
+            IF_BIT_0(prob)
+            {
+              UPDATE_0(prob);
+              distance = rep2;
+            }
+            else
+            {
+              UPDATE_1(prob);
+              distance = rep3;
+              rep3 = rep2;
+            }
+            rep2 = rep1;
+          }
+          rep1 = rep0;
+          rep0 = distance;
+        }
+        state = state < kNumLitStates ? 8 : 11;
+        prob = probs + RepLenCoder;
+      }
+      {
+        unsigned limit, offset;
+        CLzmaProb *probLen = prob + LenChoice;
+        IF_BIT_0(probLen)
+        {
+          UPDATE_0(probLen);
+          probLen = prob + LenLow + (posState << kLenNumLowBits);
+          offset = 0;
+          limit = (1 << kLenNumLowBits);
+        }
+        else
+        {
+          UPDATE_1(probLen);
+          probLen = prob + LenChoice2;
+          IF_BIT_0(probLen)
+          {
+            UPDATE_0(probLen);
+            probLen = prob + LenMid + (posState << kLenNumMidBits);
+            offset = kLenNumLowSymbols;
+            limit = (1 << kLenNumMidBits);
+          }
+          else
+          {
+            UPDATE_1(probLen);
+            probLen = prob + LenHigh;
+            offset = kLenNumLowSymbols + kLenNumMidSymbols;
+            limit = (1 << kLenNumHighBits);
+          }
+        }
+        TREE_DECODE(probLen, limit, len);
+        len += offset;
+      }
+
+      if (state >= kNumStates)
+      {
+        UInt32 distance;
+        prob = probs + PosSlot +
+            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << kNumPosSlotBits);
+        TREE_6_DECODE(prob, distance);
+        if (distance >= kStartPosModelIndex)
+        {
+          unsigned posSlot = (unsigned)distance;
+          int numDirectBits = (int)(((distance >> 1) - 1));
+          distance = (2 | (distance & 1));
+          if (posSlot < kEndPosModelIndex)
+          {
+            distance <<= numDirectBits;
+            prob = probs + SpecPos + distance - posSlot - 1;
+            {
+              UInt32 mask = 1;
+              unsigned i = 1;
+              do
+              {
+                GET_BIT2(prob + i, i, ; , distance |= mask);
+                mask <<= 1;
+              }
+              while (--numDirectBits != 0);
+            }
+          }
+          else
+          {
+            numDirectBits -= kNumAlignBits;
+            do
+            {
+              NORMALIZE
+              range >>= 1;
+              
+              {
+                UInt32 t;
+                code -= range;
+                t = (0 - ((UInt32)code >> 31)); /* (UInt32)((Int32)code >> 31) */
+                distance = (distance << 1) + (t + 1);
+                code += range & t;
+              }
+              /*
+              distance <<= 1;
+              if (code >= range)
+              {
+                code -= range;
+                distance |= 1;
+              }
+              */
+            }
+            while (--numDirectBits != 0);
+            prob = probs + Align;
+            distance <<= kNumAlignBits;
+            {
+              unsigned i = 1;
+              GET_BIT2(prob + i, i, ; , distance |= 1);
+              GET_BIT2(prob + i, i, ; , distance |= 2);
+              GET_BIT2(prob + i, i, ; , distance |= 4);
+              GET_BIT2(prob + i, i, ; , distance |= 8);
+            }
+            if (distance == (UInt32)0xFFFFFFFF)
+            {
+              len += kMatchSpecLenStart;
+              state -= kNumStates;
+              break;
+            }
+          }
+        }
+        rep3 = rep2;
+        rep2 = rep1;
+        rep1 = rep0;
+        rep0 = distance + 1;
+        if (checkDicSize == 0)
+        {
+          if (distance >= processedPos)
+            return SZ_ERROR_DATA;
+        }
+        else if (distance >= checkDicSize)
+          return SZ_ERROR_DATA;
+        state = (state < kNumStates + kNumLitStates) ? kNumLitStates : kNumLitStates + 3;
+        /* state = kLiteralNextStates[state]; */
+      }
+
+      len += kMatchMinLen;
+
+      if (limit == dicPos)
+        return SZ_ERROR_DATA;
+      {
+        SizeT rem = limit - dicPos;
+        unsigned curLen = ((rem < len) ? (unsigned)rem : len);
+        SizeT pos = (dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0);
+
+        processedPos += curLen;
+
+        len -= curLen;
+        if (pos + curLen <= dicBufSize)
+        {
+          Byte *dest = dic + dicPos;
+          ptrdiff_t src = (ptrdiff_t)pos - (ptrdiff_t)dicPos;
+          const Byte *lim = dest + curLen;
+          dicPos += curLen;
+          do
+            *(dest) = (Byte)*(dest + src);
+          while (++dest != lim);
+        }
+        else
+        {
+          do
+          {
+            dic[dicPos++] = dic[pos];
+            if (++pos == dicBufSize)
+              pos = 0;
+          }
+          while (--curLen != 0);
+        }
+      }
+    }
+  }
+  while (dicPos < limit && buf < bufLimit);
+  NORMALIZE;
+  p->buf = buf;
+  p->range = range;
+  p->code = code;
+  p->remainLen = len;
+  p->dicPos = dicPos;
+  p->processedPos = processedPos;
+  p->reps[0] = rep0;
+  p->reps[1] = rep1;
+  p->reps[2] = rep2;
+  p->reps[3] = rep3;
+  p->state = state;
+
+  return SZ_OK;
+}
+
+static void MY_FAST_CALL LzmaDec_WriteRem(CLzmaDec *p, SizeT limit)
+{
+  if (p->remainLen != 0 && p->remainLen < kMatchSpecLenStart)
+  {
+    Byte *dic = p->dic;
+    SizeT dicPos = p->dicPos;
+    SizeT dicBufSize = p->dicBufSize;
+    unsigned len = p->remainLen;
+    UInt32 rep0 = p->reps[0];
+    if (limit - dicPos < len)
+      len = (unsigned)(limit - dicPos);
+
+    if (p->checkDicSize == 0 && p->prop.dicSize - p->processedPos <= len)
+      p->checkDicSize = p->prop.dicSize;
+
+    p->processedPos += len;
+    p->remainLen -= len;
+    while (len-- != 0)
+    {
+      dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
+      dicPos++;
+    }
+    p->dicPos = dicPos;
+  }
+}
+
+static int MY_FAST_CALL LzmaDec_DecodeReal2(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
+{
+  do
+  {
+    SizeT limit2 = limit;
+    if (p->checkDicSize == 0)
+    {
+      UInt32 rem = p->prop.dicSize - p->processedPos;
+      if (limit - p->dicPos > rem)
+        limit2 = p->dicPos + rem;
+    }
+    RINOK(LzmaDec_DecodeReal(p, limit2, bufLimit));
+    if (p->processedPos >= p->prop.dicSize)
+      p->checkDicSize = p->prop.dicSize;
+    LzmaDec_WriteRem(p, limit);
+  }
+  while (p->dicPos < limit && p->buf < bufLimit && p->remainLen < kMatchSpecLenStart);
+
+  if (p->remainLen > kMatchSpecLenStart)
+  {
+    p->remainLen = kMatchSpecLenStart;
+  }
+  return 0;
+}
+
+typedef enum
+{
+  DUMMY_ERROR, /* unexpected end of input stream */
+  DUMMY_LIT,
+  DUMMY_MATCH,
+  DUMMY_REP
+} ELzmaDummy;
+
+static ELzmaDummy LzmaDec_TryDummy(const CLzmaDec *p, const Byte *buf, SizeT inSize)
+{
+  UInt32 range = p->range;
+  UInt32 code = p->code;
+  const Byte *bufLimit = buf + inSize;
+  CLzmaProb *probs = p->probs;
+  unsigned state = p->state;
+  ELzmaDummy res;
+
+  {
+    CLzmaProb *prob;
+    UInt32 bound;
+    unsigned ttt;
+    unsigned posState = (p->processedPos) & ((1 << p->prop.pb) - 1);
+
+    prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
+    IF_BIT_0_CHECK(prob)
+    {
+      UPDATE_0_CHECK
+
+      /* if (bufLimit - buf >= 7) return DUMMY_LIT; */
+
+      prob = probs + Literal;
+      if (p->checkDicSize != 0 || p->processedPos != 0)
+        prob += (LZMA_LIT_SIZE *
+          ((((p->processedPos) & ((1 << (p->prop.lp)) - 1)) << p->prop.lc) +
+          (p->dic[(p->dicPos == 0 ? p->dicBufSize : p->dicPos) - 1] >> (8 - p->prop.lc))));
+
+      if (state < kNumLitStates)
+      {
+        unsigned symbol = 1;
+        do { GET_BIT_CHECK(prob + symbol, symbol) } while (symbol < 0x100);
+      }
+      else
+      {
+        unsigned matchByte = p->dic[p->dicPos - p->reps[0] +
+            ((p->dicPos < p->reps[0]) ? p->dicBufSize : 0)];
+        unsigned offs = 0x100;
+        unsigned symbol = 1;
+        do
+        {
+          unsigned bit;
+          CLzmaProb *probLit;
+          matchByte <<= 1;
+          bit = (matchByte & offs);
+          probLit = prob + offs + bit + symbol;
+          GET_BIT2_CHECK(probLit, symbol, offs &= ~bit, offs &= bit)
+        }
+        while (symbol < 0x100);
+      }
+      res = DUMMY_LIT;
+    }
+    else
+    {
+      unsigned len;
+      UPDATE_1_CHECK;
+
+      prob = probs + IsRep + state;
+      IF_BIT_0_CHECK(prob)
+      {
+        UPDATE_0_CHECK;
+        state = 0;
+        prob = probs + LenCoder;
+        res = DUMMY_MATCH;
+      }
+      else
+      {
+        UPDATE_1_CHECK;
+        res = DUMMY_REP;
+        prob = probs + IsRepG0 + state;
+        IF_BIT_0_CHECK(prob)
+        {
+          UPDATE_0_CHECK;
+          prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
+          IF_BIT_0_CHECK(prob)
+          {
+            UPDATE_0_CHECK;
+            NORMALIZE_CHECK;
+            return DUMMY_REP;
+          }
+          else
+          {
+            UPDATE_1_CHECK;
+          }
+        }
+        else
+        {
+          UPDATE_1_CHECK;
+          prob = probs + IsRepG1 + state;
+          IF_BIT_0_CHECK(prob)
+          {
+            UPDATE_0_CHECK;
+          }
+          else
+          {
+            UPDATE_1_CHECK;
+            prob = probs + IsRepG2 + state;
+            IF_BIT_0_CHECK(prob)
+            {
+              UPDATE_0_CHECK;
+            }
+            else
+            {
+              UPDATE_1_CHECK;
+            }
+          }
+        }
+        state = kNumStates;
+        prob = probs + RepLenCoder;
+      }
+      {
+        unsigned limit, offset;
+        CLzmaProb *probLen = prob + LenChoice;
+        IF_BIT_0_CHECK(probLen)
+        {
+          UPDATE_0_CHECK;
+          probLen = prob + LenLow + (posState << kLenNumLowBits);
+          offset = 0;
+          limit = 1 << kLenNumLowBits;
+        }
+        else
+        {
+          UPDATE_1_CHECK;
+          probLen = prob + LenChoice2;
+          IF_BIT_0_CHECK(probLen)
+          {
+            UPDATE_0_CHECK;
+            probLen = prob + LenMid + (posState << kLenNumMidBits);
+            offset = kLenNumLowSymbols;
+            limit = 1 << kLenNumMidBits;
+          }
+          else
+          {
+            UPDATE_1_CHECK;
+            probLen = prob + LenHigh;
+            offset = kLenNumLowSymbols + kLenNumMidSymbols;
+            limit = 1 << kLenNumHighBits;
+          }
+        }
+        TREE_DECODE_CHECK(probLen, limit, len);
+        len += offset;
+      }
+
+      if (state < 4)
+      {
+        unsigned posSlot;
+        prob = probs + PosSlot +
+            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
+            kNumPosSlotBits);
+        TREE_DECODE_CHECK(prob, 1 << kNumPosSlotBits, posSlot);
+        if (posSlot >= kStartPosModelIndex)
+        {
+          int numDirectBits = ((posSlot >> 1) - 1);
+
+          /* if (bufLimit - buf >= 8) return DUMMY_MATCH; */
+
+          if (posSlot < kEndPosModelIndex)
+          {
+            prob = probs + SpecPos + ((2 | (posSlot & 1)) << numDirectBits) - posSlot - 1;
+          }
+          else
+          {
+            numDirectBits -= kNumAlignBits;
+            do
+            {
+              NORMALIZE_CHECK
+              range >>= 1;
+              code -= range & (((code - range) >> 31) - 1);
+              /* if (code >= range) code -= range; */
+            }
+            while (--numDirectBits != 0);
+            prob = probs + Align;
+            numDirectBits = kNumAlignBits;
+          }
+          {
+            unsigned i = 1;
+            do
+            {
+              GET_BIT_CHECK(prob + i, i);
+            }
+            while (--numDirectBits != 0);
+          }
+        }
+      }
+    }
+  }
+  NORMALIZE_CHECK;
+  return res;
+}
+
+
+static void LzmaDec_InitRc(CLzmaDec *p, const Byte *data)
+{
+  p->code = ((UInt32)data[1] << 24) | ((UInt32)data[2] << 16) | ((UInt32)data[3] << 8) | ((UInt32)data[4]);
+  p->range = 0xFFFFFFFF;
+  p->needFlush = 0;
+}
+
+void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
+{
+  p->needFlush = 1;
+  p->remainLen = 0;
+  p->tempBufSize = 0;
+
+  if (initDic)
+  {
+    p->processedPos = 0;
+    p->checkDicSize = 0;
+    p->needInitState = 1;
+  }
+  if (initState)
+    p->needInitState = 1;
+}
+
+void LzmaDec_Init(CLzmaDec *p)
+{
+  p->dicPos = 0;
+  LzmaDec_InitDicAndState(p, True, True);
+}
+
+static void LzmaDec_InitStateReal(CLzmaDec *p)
+{
+  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (p->prop.lc + p->prop.lp));
+  UInt32 i;
+  CLzmaProb *probs = p->probs;
+  for (i = 0; i < numProbs; i++)
+    probs[i] = kBitModelTotal >> 1;
+  p->reps[0] = p->reps[1] = p->reps[2] = p->reps[3] = 1;
+  p->state = 0;
+  p->needInitState = 0;
+}
+
+SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
+    ELzmaFinishMode finishMode, ELzmaStatus *status)
+{
+  SizeT inSize = *srcLen;
+  (*srcLen) = 0;
+  LzmaDec_WriteRem(p, dicLimit);
+  
+  *status = LZMA_STATUS_NOT_SPECIFIED;
+
+  while (p->remainLen != kMatchSpecLenStart)
+  {
+      int checkEndMarkNow;
+
+      if (p->needFlush != 0)
+      {
+        for (; inSize > 0 && p->tempBufSize < RC_INIT_SIZE; (*srcLen)++, inSize--)
+          p->tempBuf[p->tempBufSize++] = *src++;
+        if (p->tempBufSize < RC_INIT_SIZE)
+        {
+          *status = LZMA_STATUS_NEEDS_MORE_INPUT;
+          return SZ_OK;
+        }
+        if (p->tempBuf[0] != 0)
+          return SZ_ERROR_DATA;
+
+        LzmaDec_InitRc(p, p->tempBuf);
+        p->tempBufSize = 0;
+      }
+
+      checkEndMarkNow = 0;
+      if (p->dicPos >= dicLimit)
+      {
+        if (p->remainLen == 0 && p->code == 0)
+        {
+          *status = LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK;
+          return SZ_OK;
+        }
+        if (finishMode == LZMA_FINISH_ANY)
+        {
+          *status = LZMA_STATUS_NOT_FINISHED;
+          return SZ_OK;
+        }
+        if (p->remainLen != 0)
+        {
+          *status = LZMA_STATUS_NOT_FINISHED;
+          return SZ_ERROR_DATA;
+        }
+        checkEndMarkNow = 1;
+      }
+
+      if (p->needInitState)
+        LzmaDec_InitStateReal(p);
+  
+      if (p->tempBufSize == 0)
+      {
+        SizeT processed;
+        const Byte *bufLimit;
+        if (inSize < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
+        {
+          int dummyRes = LzmaDec_TryDummy(p, src, inSize);
+          if (dummyRes == DUMMY_ERROR)
+          {
+            memcpy(p->tempBuf, src, inSize);
+            p->tempBufSize = (unsigned)inSize;
+            (*srcLen) += inSize;
+            *status = LZMA_STATUS_NEEDS_MORE_INPUT;
+            return SZ_OK;
+          }
+          if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
+          {
+            *status = LZMA_STATUS_NOT_FINISHED;
+            return SZ_ERROR_DATA;
+          }
+          bufLimit = src;
+        }
+        else
+          bufLimit = src + inSize - LZMA_REQUIRED_INPUT_MAX;
+        p->buf = src;
+        if (LzmaDec_DecodeReal2(p, dicLimit, bufLimit) != 0)
+          return SZ_ERROR_DATA;
+        processed = (SizeT)(p->buf - src);
+        (*srcLen) += processed;
+        src += processed;
+        inSize -= processed;
+      }
+      else
+      {
+        unsigned rem = p->tempBufSize, lookAhead = 0;
+        while (rem < LZMA_REQUIRED_INPUT_MAX && lookAhead < inSize)
+          p->tempBuf[rem++] = src[lookAhead++];
+        p->tempBufSize = rem;
+        if (rem < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
+        {
+          int dummyRes = LzmaDec_TryDummy(p, p->tempBuf, rem);
+          if (dummyRes == DUMMY_ERROR)
+          {
+            (*srcLen) += lookAhead;
+            *status = LZMA_STATUS_NEEDS_MORE_INPUT;
+            return SZ_OK;
+          }
+          if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
+          {
+            *status = LZMA_STATUS_NOT_FINISHED;
+            return SZ_ERROR_DATA;
+          }
+        }
+        p->buf = p->tempBuf;
+        if (LzmaDec_DecodeReal2(p, dicLimit, p->buf) != 0)
+          return SZ_ERROR_DATA;
+        lookAhead -= (rem - (unsigned)(p->buf - p->tempBuf));
+        (*srcLen) += lookAhead;
+        src += lookAhead;
+        inSize -= lookAhead;
+        p->tempBufSize = 0;
+      }
+  }
+  if (p->code == 0)
+    *status = LZMA_STATUS_FINISHED_WITH_MARK;
+  return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA;
+}
+
+SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status)
+{
+  SizeT outSize = *destLen;
+  SizeT inSize = *srcLen;
+  *srcLen = *destLen = 0;
+  for (;;)
+  {
+    SizeT inSizeCur = inSize, outSizeCur, dicPos;
+    ELzmaFinishMode curFinishMode;
+    SRes res;
+    if (p->dicPos == p->dicBufSize)
+      p->dicPos = 0;
+    dicPos = p->dicPos;
+    if (outSize > p->dicBufSize - dicPos)
+    {
+      outSizeCur = p->dicBufSize;
+      curFinishMode = LZMA_FINISH_ANY;
+    }
+    else
+    {
+      outSizeCur = dicPos + outSize;
+      curFinishMode = finishMode;
+    }
+
+    res = LzmaDec_DecodeToDic(p, outSizeCur, src, &inSizeCur, curFinishMode, status);
+    src += inSizeCur;
+    inSize -= inSizeCur;
+    *srcLen += inSizeCur;
+    outSizeCur = p->dicPos - dicPos;
+    memcpy(dest, p->dic + dicPos, outSizeCur);
+    dest += outSizeCur;
+    outSize -= outSizeCur;
+    *destLen += outSizeCur;
+    if (res != 0)
+      return res;
+    if (outSizeCur == 0 || outSize == 0)
+      return SZ_OK;
+  }
+}
+
+void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
+{
+  alloc->Free(alloc, p->probs);
+  p->probs = 0;
+}
+
+static void LzmaDec_FreeDict(CLzmaDec *p, ISzAlloc *alloc)
+{
+  alloc->Free(alloc, p->dic);
+  p->dic = 0;
+}
+
+void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc)
+{
+  LzmaDec_FreeProbs(p, alloc);
+  LzmaDec_FreeDict(p, alloc);
+}
+
+SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
+{
+  UInt32 dicSize;
+  Byte d;
+  
+  if (size < LZMA_PROPS_SIZE)
+    return SZ_ERROR_UNSUPPORTED;
+  else
+    dicSize = data[1] | ((UInt32)data[2] << 8) | ((UInt32)data[3] << 16) | ((UInt32)data[4] << 24);
+ 
+  if (dicSize < LZMA_DIC_MIN)
+    dicSize = LZMA_DIC_MIN;
+  p->dicSize = dicSize;
+
+  d = data[0];
+  if (d >= (9 * 5 * 5))
+    return SZ_ERROR_UNSUPPORTED;
+
+  p->lc = d % 9;
+  d /= 9;
+  p->pb = d / 5;
+  p->lp = d % 5;
+
+  return SZ_OK;
+}
+
+static SRes LzmaDec_AllocateProbs2(CLzmaDec *p, const CLzmaProps *propNew, ISzAlloc *alloc)
+{
+  UInt32 numProbs = LzmaProps_GetNumProbs(propNew);
+  if (p->probs == 0 || numProbs != p->numProbs)
+  {
+    LzmaDec_FreeProbs(p, alloc);
+    p->probs = (CLzmaProb *)alloc->Alloc(alloc, numProbs * sizeof(CLzmaProb));
+    p->numProbs = numProbs;
+    if (p->probs == 0)
+      return SZ_ERROR_MEM;
+  }
+  return SZ_OK;
+}
+
+SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
+{
+  CLzmaProps propNew;
+  RINOK(LzmaProps_Decode(&propNew, props, propsSize));
+  RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
+  p->prop = propNew;
+  return SZ_OK;
+}
+
+SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
+{
+  CLzmaProps propNew;
+  SizeT dicBufSize;
+  RINOK(LzmaProps_Decode(&propNew, props, propsSize));
+  RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
+  dicBufSize = propNew.dicSize;
+  if (p->dic == 0 || dicBufSize != p->dicBufSize)
+  {
+    LzmaDec_FreeDict(p, alloc);
+    p->dic = (Byte *)alloc->Alloc(alloc, dicBufSize);
+    if (p->dic == 0)
+    {
+      LzmaDec_FreeProbs(p, alloc);
+      return SZ_ERROR_MEM;
+    }
+  }
+  p->dicBufSize = dicBufSize;
+  p->prop = propNew;
+  return SZ_OK;
+}
+
+SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
+    const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
+    ELzmaStatus *status, ISzAlloc *alloc)
+{
+  CLzmaDec p;
+  SRes res;
+  SizeT inSize = *srcLen;
+  SizeT outSize = *destLen;
+  *srcLen = *destLen = 0;
+  if (inSize < RC_INIT_SIZE)
+    return SZ_ERROR_INPUT_EOF;
+
+  LzmaDec_Construct(&p);
+  res = LzmaDec_AllocateProbs(&p, propData, propSize, alloc);
+  if (res != 0)
+    return res;
+  p.dic = dest;
+  p.dicBufSize = outSize;
+
+  LzmaDec_Init(&p);
+  
+  *srcLen = inSize;
+  res = LzmaDec_DecodeToDic(&p, outSize, src, srcLen, finishMode, status);
+
+  if (res == SZ_OK && *status == LZMA_STATUS_NEEDS_MORE_INPUT)
+    res = SZ_ERROR_INPUT_EOF;
+
+  (*destLen) = p.dicPos;
+  LzmaDec_FreeProbs(&p, alloc);
+  return res;
+}

source/Irrlicht/lzma/LzmaDec.h

+/* LzmaDec.h -- LZMA Decoder
+2008-10-04 : Igor Pavlov : Public domain */
+
+#ifndef __LZMADEC_H
+#define __LZMADEC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "Types.h"
+
+/* #define _LZMA_PROB32 */
+/* _LZMA_PROB32 can increase the speed on some CPUs,
+   but memory usage for CLzmaDec::probs will be doubled in that case */
+
+#ifdef _LZMA_PROB32
+#define CLzmaProb UInt32
+#else
+#define CLzmaProb UInt16
+#endif
+
+
+/* ---------- LZMA Properties ---------- */
+
+#define LZMA_PROPS_SIZE 5
+
+typedef struct _CLzmaProps
+{
+  unsigned lc, lp, pb;
+  UInt32 dicSize;
+} CLzmaProps;
+
+/* LzmaProps_Decode - decodes properties
+Returns:
+  SZ_OK
+  SZ_ERROR_UNSUPPORTED - Unsupported properties
+*/
+
+SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size);
+
+
+/* ---------- LZMA Decoder state ---------- */
+
+/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case.
+   Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */
+
+#define LZMA_REQUIRED_INPUT_MAX 20
+
+typedef struct
+{
+  CLzmaProps prop;
+  CLzmaProb *probs;
+  Byte *dic;
+  const Byte *buf;
+  UInt32 range, code;
+  SizeT dicPos;
+  SizeT dicBufSize;
+  UInt32 processedPos;
+  UInt32 checkDicSize;
+  unsigned state;
+  UInt32 reps[4];
+  unsigned remainLen;
+  int needFlush;
+  int needInitState;
+  UInt32 numProbs;
+  unsigned tempBufSize;
+  Byte tempBuf[LZMA_REQUIRED_INPUT_MAX];
+} CLzmaDec;
+
+#define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; }
+
+void LzmaDec_Init(CLzmaDec *p);
+
+/* There are two types of LZMA streams:
+     0) Stream with end mark. That end mark adds about 6 bytes to compressed size.
+     1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */
+
+typedef enum
+{
+  LZMA_FINISH_ANY,   /* finish at any point */
+  LZMA_FINISH_END    /* block must be finished at the end */
+} ELzmaFinishMode;
+
+/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!!
+
+   You must use LZMA_FINISH_END, when you know that current output buffer
+   covers last bytes of block. In other cases you must use LZMA_FINISH_ANY.
+
+   If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK,
+   and output value of destLen will be less than output buffer size limit.
+   You can check status result also.
+
+   You can use multiple checks to test data integrity after full decompression:
+     1) Check Result and "status" variable.
+     2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize.
+     3) Check that output(srcLen) = compressedSize, if you know real compressedSize.
+        You must use correct finish mode in that case. */
+
+typedef enum
+{
+  LZMA_STATUS_NOT_SPECIFIED,               /* use main error code instead */
+  LZMA_STATUS_FINISHED_WITH_MARK,          /* stream was finished with end mark. */
+  LZMA_STATUS_NOT_FINISHED,                /* stream was not finished */
+  LZMA_STATUS_NEEDS_MORE_INPUT,            /* you must provide more input bytes */
+  LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK  /* there is probability that stream was finished without end mark */
+} ELzmaStatus;
+
+/* ELzmaStatus is used only as output value for function call */
+
+
+/* ---------- Interfaces ---------- */
+
+/* There are 3 levels of interfaces:
+     1) Dictionary Interface
+     2) Buffer Interface
+     3) One Call Interface
+   You can select any of these interfaces, but don't mix functions from different
+   groups for same object. */
+
+
+/* There are two variants to allocate state for Dictionary Interface:
+     1) LzmaDec_Allocate / LzmaDec_Free
+     2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs
+   You can use variant 2, if you set dictionary buffer manually.
+   For Buffer Interface you must always use variant 1.
+
+LzmaDec_Allocate* can return:
+  SZ_OK
+  SZ_ERROR_MEM         - Memory allocation error
+  SZ_ERROR_UNSUPPORTED - Unsupported properties
+*/
+   
+SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc);
+void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc);
+
+SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc);
+void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc);
+
+/* ---------- Dictionary Interface ---------- */
+
+/* You can use it, if you want to eliminate the overhead for data copying from
+   dictionary to some other external buffer.
+   You must work with CLzmaDec variables directly in this interface.
+
+   STEPS:
+     LzmaDec_Constr()
+     LzmaDec_Allocate()
+     for (each new stream)
+     {
+       LzmaDec_Init()
+       while (it needs more decompression)
+       {
+         LzmaDec_DecodeToDic()
+         use data from CLzmaDec::dic and update CLzmaDec::dicPos
+       }
+     }
+     LzmaDec_Free()
+*/
+
+/* LzmaDec_DecodeToDic
+   
+   The decoding to internal dictionary buffer (CLzmaDec::dic).
+   You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!
+
+finishMode:
+  It has meaning only if the decoding reaches output limit (dicLimit).
+  LZMA_FINISH_ANY - Decode just dicLimit bytes.
+  LZMA_FINISH_END - Stream must be finished after dicLimit.
+
+Returns:
+  SZ_OK
+    status:
+      LZMA_STATUS_FINISHED_WITH_MARK
+      LZMA_STATUS_NOT_FINISHED
+      LZMA_STATUS_NEEDS_MORE_INPUT
+      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
+  SZ_ERROR_DATA - Data error
+*/
+
+SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit,
+    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
+
+
+/* ---------- Buffer Interface ---------- */
+
+/* It's zlib-like interface.
+   See LzmaDec_DecodeToDic description for information about STEPS and return results,
+   but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
+   to work with CLzmaDec variables manually.
+
+finishMode:
+  It has meaning only if the decoding reaches output limit (*destLen).
+  LZMA_FINISH_ANY - Decode just destLen bytes.
+  LZMA_FINISH_END - Stream must be finished after (*destLen).
+*/
+
+SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
+    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
+
+
+/* ---------- One Call Interface ---------- */
+
+/* LzmaDecode
+
+finishMode:
+  It has meaning only if the decoding reaches output limit (*destLen).
+  LZMA_FINISH_ANY - Decode just destLen bytes.
+  LZMA_FINISH_END - Stream must be finished after (*destLen).
+
+Returns:
+  SZ_OK
+    status:
+      LZMA_STATUS_FINISHED_WITH_MARK
+      LZMA_STATUS_NOT_FINISHED
+      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
+  SZ_ERROR_DATA - Data error
+  SZ_ERROR_MEM  - Memory allocation error
+  SZ_ERROR_UNSUPPORTED - Unsupported properties
+  SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src).
+*/
+
+SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
+    const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
+    ELzmaStatus *status, ISzAlloc *alloc);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

source/Irrlicht/lzma/Types.h

+/* Types.h -- Basic types
+2008-11-23 : Igor Pavlov : Public domain */
+
+#ifndef __7Z_TYPES_H
+#define __7Z_TYPES_H
+
+#include <stddef.h>
+
+#ifdef _WIN32
+#include <windows.h>
+#endif
+
+#define SZ_OK 0
+
+#define SZ_ERROR_DATA 1
+#define SZ_ERROR_MEM 2
+#define SZ_ERROR_CRC 3
+#define SZ_ERROR_UNSUPPORTED 4
+#define SZ_ERROR_PARAM 5
+#define SZ_ERROR_INPUT_EOF 6
+#define SZ_ERROR_OUTPUT_EOF 7
+#define SZ_ERROR_READ 8
+#define SZ_ERROR_WRITE 9
+#define SZ_ERROR_PROGRESS 10
+#define SZ_ERROR_FAIL 11
+#define SZ_ERROR_THREAD 12
+
+#define SZ_ERROR_ARCHIVE 16
+#define SZ_ERROR_NO_ARCHIVE 17
+
+typedef int SRes;
+
+#ifdef _WIN32
+typedef DWORD WRes;
+#else
+typedef int WRes;
+#endif
+
+#ifndef RINOK
+#define RINOK(x) { int __result__ = (x); if (__result__ != 0) return __result__; }
+#endif
+
+typedef unsigned char Byte;
+typedef short Int16;
+typedef unsigned short UInt16;
+
+#ifdef _LZMA_UINT32_IS_ULONG
+typedef long Int32;
+typedef unsigned long UInt32;
+#else
+typedef int Int32;
+typedef unsigned int UInt32;
+#endif
+
+#ifdef _SZ_NO_INT_64
+
+/* define _SZ_NO_INT_64, if your compiler doesn't support 64-bit integers.
+   NOTES: Some code will work incorrectly in that case! */
+
+typedef long Int64;
+typedef unsigned long UInt64;
+
+#else
+
+#if defined(_MSC_VER) || defined(__BORLANDC__)
+typedef __int64 Int64;
+typedef unsigned __int64 UInt64;
+#else
+typedef long long int Int64;
+typedef unsigned long long int UInt64;
+#endif
+
+#endif
+
+#ifdef _LZMA_NO_SYSTEM_SIZE_T
+typedef UInt32 SizeT;
+#else
+typedef size_t SizeT;
+#endif
+
+typedef int Bool;
+#define True 1
+#define False 0
+
+
+#ifdef _MSC_VER
+
+#if _MSC_VER >= 1300
+#define MY_NO_INLINE __declspec(noinline)
+#else
+#define MY_NO_INLINE
+#endif
+
+#define MY_CDECL __cdecl
+#define MY_STD_CALL __stdcall
+#define MY_FAST_CALL MY_NO_INLINE __fastcall
+
+#else
+
+#define MY_CDECL
+#define MY_STD_CALL
+#define MY_FAST_CALL
+
+#endif
+
+
+/* The following interfaces use first parameter as pointer to structure */
+
+typedef struct
+{
+  SRes (*Read)(void *p, void *buf, size_t *size);
+    /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
+       (output(*size) < input(*size)) is allowed */
+} ISeqInStream;
+
+/* it can return SZ_ERROR_INPUT_EOF */
+SRes SeqInStream_Read(ISeqInStream *stream, void *buf, size_t size);
+SRes SeqInStream_Read2(ISeqInStream *stream, void *buf, size_t size, SRes errorType);
+SRes SeqInStream_ReadByte(ISeqInStream *stream, Byte *buf);
+
+typedef struct
+{
+  size_t (*Write)(void *p, const void *buf, size_t size);
+    /* Returns: result - the number of actually written bytes.
+       (result < size) means error */
+} ISeqOutStream;
+
+typedef enum
+{
+  SZ_SEEK_SET = 0,
+  SZ_SEEK_CUR = 1,
+  SZ_SEEK_END = 2
+} ESzSeek;
+
+typedef struct
+{
+  SRes (*Read)(void *p, void *buf, size_t *size);  /* same as ISeqInStream::Read */
+  SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
+} ISeekInStream;
+
+typedef struct
+{
+  SRes (*Look)(void *p, void **buf, size_t *size);
+    /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
+       (output(*size) > input(*size)) is not allowed
+       (output(*size) < input(*size)) is allowed */
+  SRes (*Skip)(void *p, size_t offset);
+    /* offset must be <= output(*size) of Look */
+
+  SRes (*Read)(void *p, void *buf, size_t *size);
+    /* reads directly (without buffer). It's same as ISeqInStream::Read */
+  SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
+} ILookInStream;
+
+SRes LookInStream_LookRead(ILookInStream *stream, void *buf, size_t *size);
+SRes LookInStream_SeekTo(ILookInStream *stream, UInt64 offset);
+
+/* reads via ILookInStream::Read */
+SRes LookInStream_Read2(ILookInStream *stream, void *buf, size_t size, SRes errorType);
+SRes LookInStream_Read(ILookInStream *stream, void *buf, size_t size);
+
+#define LookToRead_BUF_SIZE (1 << 14)
+
+typedef struct
+{
+  ILookInStream s;
+  ISeekInStream *realStream;
+  size_t pos;
+  size_t size;
+  Byte buf[LookToRead_BUF_SIZE];
+} CLookToRead;
+
+void LookToRead_CreateVTable(CLookToRead *p, int lookahead);
+void LookToRead_Init(CLookToRead *p);
+
+typedef struct
+{
+  ISeqInStream s;
+  ILookInStream *realStream;
+} CSecToLook;
+
+void SecToLook_CreateVTable(CSecToLook *p);
+
+typedef struct
+{
+  ISeqInStream s;
+  ILookInStream *realStream;
+} CSecToRead;
+
+void SecToRead_CreateVTable(CSecToRead *p);
+
+typedef struct
+{
+  SRes (*Progress)(void *p, UInt64 inSize, UInt64 outSize);
+    /* Returns: result. (result != SZ_OK) means break.
+       Value (UInt64)(Int64)-1 for size means unknown value. */
+} ICompressProgress;
+
+typedef struct
+{
+  void *(*Alloc)(void *p, size_t size);
+  void (*Free)(void *p, void *address); /* address can be 0 */
+} ISzAlloc;
+
+#define IAlloc_Alloc(p, size) (p)->Alloc((p), size)
+#define IAlloc_Free(p, a) (p)->Free((p), a)
+
+#endif