Revert "更新jpeglib与libpng"

This reverts commit 429190da.

irrlicht/source/Irrlicht/jpeglib/Makefile.am

@@ -51,11 +51,11 @@ CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
         jconfig.vms
 
 # Support scripts for configure
-CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing
+CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \
+        missing ar-lib
 
 # Miscellaneous support files
-OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \
-        libjpeg.map
+OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map
 
 # Test support files
 TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \

irrlicht/source/Irrlicht/jpeglib/ansi2knr.1

-.TH ANSI2KNR 1 "19 Jan 1996"
-.SH NAME
-ansi2knr \- convert ANSI C to Kernighan & Ritchie C
-.SH SYNOPSIS
-.I ansi2knr
-[--varargs] input_file [output_file]
-.SH DESCRIPTION
-If no output_file is supplied, output goes to stdout.
-.br
-There are no error messages.
-.sp
-.I ansi2knr
-recognizes function definitions by seeing a non-keyword identifier at the left
-margin, followed by a left parenthesis, with a right parenthesis as the last
-character on the line, and with a left brace as the first token on the
-following line (ignoring possible intervening comments).  It will recognize a
-multi-line header provided that no intervening line ends with a left or right
-brace or a semicolon.  These algorithms ignore whitespace and comments, except
-that the function name must be the first thing on the line.
-.sp
-The following constructs will confuse it:
-.br
-     - Any other construct that starts at the left margin and follows the
-above syntax (such as a macro or function call).
-.br
-     - Some macros that tinker with the syntax of the function header.
-.sp
-The --varargs switch is obsolete, and is recognized only for
-backwards compatibility.  The present version of
-.I ansi2knr
-will always attempt to convert a ... argument to va_alist and va_dcl.
-.SH AUTHOR
-L. Peter Deutsch <ghost@aladdin.com> wrote the original ansi2knr and
-continues to maintain the current version; most of the code in the current
-version is his work.  ansi2knr also includes contributions by Francois
-Pinard <pinard@iro.umontreal.ca> and Jim Avera <jima@netcom.com>.

irrlicht/source/Irrlicht/jpeglib/cjpeg.1

-.TH CJPEG 1 "28 August 2011"
+.TH CJPEG 1 "23 November 2013"
 .SH NAME
 cjpeg \- compress an image file to a JPEG file
 .SH SYNOPSIS
@@ -53,9 +53,12 @@ you'll get a smaller JPEG file that takes less time to process.
 Create RGB JPEG file.
 Using this switch suppresses the conversion from RGB
 colorspace input to the default YCbCr JPEG colorspace.
-Use this switch in combination with the
+You can use this switch in combination with the
 .BI \-block " N"
 switch (see below) for lossless JPEG coding.
+See also the
+.B \-rgb1
+switch below.
 .TP
 .B \-optimize
 Perform optimization of entropy encoding parameters.  Without this, default
@@ -166,8 +169,8 @@ Switches for advanced users:
 .B \-arithmetic
 Use arithmetic coding.
 .B Caution:
-arithmetic coded JPEG is not yet widely implemented, so many decoders will be
-unable to view an arithmetic coded JPEG file at all.
+arithmetic coded JPEG is not yet widely implemented, so many decoders will
+be unable to view an arithmetic coded JPEG file at all.
 .TP
 .BI \-block " N"
 Set DCT block size.  All N from 1 to 16 are possible.
@@ -181,6 +184,41 @@ An implementation of the JPEG SmartScale extension is required for this
 feature.  SmartScale enabled JPEG is not yet widely implemented, so many
 decoders will be unable to view a SmartScale extended JPEG file at all.
 .TP
+.B \-rgb1
+Create RGB JPEG file with reversible color transform.
+Works like the
+.B \-rgb
+switch (see above) and inserts a simple reversible color transform
+into the processing which significantly improves the compression.
+Use this switch in combination with the
+.BI \-block " N"
+switch (see above) for lossless JPEG coding.
+.B Caution:
+A decoder with inverse color transform support is required for
+this feature.  Reversible color transform support is not yet
+widely implemented, so many decoders will be unable to view
+a reversible color transformed JPEG file at all.
+.TP
+.B \-bgycc
+Create big gamut YCC JPEG file.
+In this type of encoding the color difference components are quantized
+further by a factor of 2 compared to the normal Cb/Cr values, thus creating
+space to allow larger color values with higher saturation than the normal
+gamut limits to be encoded.  In order to compensate for the loss of color
+fidelity compared to a normal YCC encoded file, the color quantization
+tables can be adjusted accordingly.  For example,
+.B cjpeg \-bgycc \-quality
+80,90 will give similar results as
+.B cjpeg \-quality
+80.
+.B Caution:
+For correct decompression a decoder with big gamut YCC support (JFIF
+version 2) is required.  An old decoder may or may not display a big
+gamut YCC encoded JPEG file, depending on JFIF version check and
+corresponding warning/error configuration.  In case of a granted
+decompression the old decoder will display the image with half
+saturated colors.
+.TP
 .B \-dct int
 Use integer DCT method (default).
 .TP
@@ -337,7 +375,8 @@ Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44.
 .SH AUTHOR
 Independent JPEG Group
 .SH BUGS
-GIF input files are no longer supported, to avoid the Unisys LZW patent.
+GIF input files are no longer supported, to avoid the Unisys LZW patent
+(now expired).
 (Conversion of GIF files to JPEG is usually a bad idea anyway.)
 .PP
 Not all variants of BMP and Targa file formats are supported.

irrlicht/source/Irrlicht/jpeglib/cjpeg.c

@@ -2,7 +2,7 @@
  * cjpeg.c
  *
  * Copyright (C) 1991-1998, Thomas G. Lane.
- * Modified 2003-2011 by Guido Vollbeding.
+ * Modified 2003-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -172,6 +172,10 @@ usage (void)
 #ifdef DCT_SCALING_SUPPORTED
   fprintf(stderr, "  -block N       DCT block size (1..16; default is 8)\n");
 #endif
+#if JPEG_LIB_VERSION_MAJOR >= 9
+  fprintf(stderr, "  -rgb1          Create RGB JPEG file with reversible color transform\n");
+  fprintf(stderr, "  -bgycc         Create big gamut YCC JPEG file\n");
+#endif
 #ifdef DCT_ISLOW_SUPPORTED
   fprintf(stderr, "  -dct int       Use integer DCT method%s\n",
 	  (JDCT_DEFAULT == JDCT_ISLOW ? " (default)" : ""));
@@ -310,10 +314,27 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
       /* Force a monochrome JPEG file to be generated. */
       jpeg_set_colorspace(cinfo, JCS_GRAYSCALE);
 
-    } else if (keymatch(arg, "rgb", 3)) {
+    } else if (keymatch(arg, "rgb", 3) || keymatch(arg, "rgb1", 4)) {
       /* Force an RGB JPEG file to be generated. */
+#if JPEG_LIB_VERSION_MAJOR >= 9
+      /* Note: Entropy table assignment in jpeg_set_colorspace depends
+       * on color_transform.
+       */
+      cinfo->color_transform = arg[3] ? JCT_SUBTRACT_GREEN : JCT_NONE;
+#endif
       jpeg_set_colorspace(cinfo, JCS_RGB);
 
+    } else if (keymatch(arg, "bgycc", 5)) {
+      /* Force a big gamut YCC JPEG file to be generated. */
+#if JPEG_LIB_VERSION_MAJOR >= 9 && \
+      (JPEG_LIB_VERSION_MAJOR > 9 || JPEG_LIB_VERSION_MINOR >= 1)
+      jpeg_set_colorspace(cinfo, JCS_BG_YCC);
+#else
+      fprintf(stderr, "%s: sorry, BG_YCC colorspace not supported\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
     } else if (keymatch(arg, "maxmemory", 3)) {
       /* Maximum memory in Kb (or Mb with 'm'). */
       long lval;
@@ -328,7 +349,7 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
       cinfo->mem->max_memory_to_use = lval * 1000L;
 
     } else if (keymatch(arg, "nosmooth", 3)) {
-      /* Suppress fancy downsampling */
+      /* Suppress fancy downsampling. */
       cinfo->do_fancy_downsampling = FALSE;
 
     } else if (keymatch(arg, "optimize", 1) || keymatch(arg, "optimise", 1)) {
@@ -414,7 +435,7 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
       /* Scale the image by a fraction M/N. */
       if (++argn >= argc)	/* advance to next argument */
 	usage();
-      if (sscanf(argv[argn], "%d/%d",
+      if (sscanf(argv[argn], "%u/%u",
 		 &cinfo->scale_num, &cinfo->scale_denom) != 2)
 	usage();
 

irrlicht/source/Irrlicht/jpeglib/configure.ac

@@ -5,7 +5,7 @@
 # Configure script for IJG libjpeg
 #
 
-AC_INIT([libjpeg], [8.4.0])
+AC_INIT([libjpeg], [9.1.0])
 
 # Directory where autotools helper scripts lives.
 AC_CONFIG_AUX_DIR([.])
@@ -21,16 +21,13 @@ AC_CANONICAL_TARGET
 
 # Initialize Automake
 # Don't require all the GNU mandated files
-AM_INIT_AUTOMAKE([-Wall -Werror -Wno-obsolete ansi2knr no-dist foreign])
+AM_INIT_AUTOMAKE([-Wall -Werror no-dist foreign])
 
 # Make --enable-silent-rules the default.
 # To get verbose build output you may configure
 # with --disable-silent-rules or use "make V=1".
 AM_SILENT_RULES([yes])
 
-# This is required when using the de-ANSI-fication feature.
-AM_C_PROTOTYPES
-
 # Add configure option --enable-maintainer-mode which enables
 # dependency checking and generation useful to package maintainers.
 # This is made an option to avoid confusing end users.
@@ -43,6 +40,7 @@ AC_PROG_CPP
 AC_PROG_INSTALL
 AC_PROG_MAKE_SET
 AC_PROG_LN_S
+AM_PROG_AR
 
 # Check if LD supports linker scripts,
 # and define automake conditional HAVE_LD_VERSION_SCRIPT if so.
@@ -225,6 +223,10 @@ int possibly_dupli_function () { return 1; }
 # Run-time checks
 AC_MSG_CHECKING([to see if char is signed])
 AC_TRY_RUN([
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#include <stdio.h>
 #ifdef HAVE_PROTOTYPES
 int is_char_signed (int arg)
 #else
@@ -254,6 +256,10 @@ int main() {
 
 AC_MSG_CHECKING([to see if right shift is signed])
 AC_TRY_RUN([
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#include <stdio.h>
 #ifdef HAVE_PROTOTYPES
 int is_shifting_signed (long arg)
 #else
@@ -288,6 +294,9 @@ int main() {
 
 AC_MSG_CHECKING([to see if fopen accepts b spec])
 AC_TRY_RUN([
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
 #include <stdio.h>
 int main() {
   if (fopen("conftestdata", "wb") != NULL)

irrlicht/source/Irrlicht/jpeglib/djpeg.1

-.TH DJPEG 1 "3 October 2009"
+.TH DJPEG 1 "23 November 2013"
 .SH NAME
 djpeg \- decompress a JPEG file to an image file
 .SH SYNOPSIS
@@ -246,7 +246,7 @@ Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44.
 .SH AUTHOR
 Independent JPEG Group
 .SH BUGS
-To avoid the Unisys LZW patent,
+To avoid the Unisys LZW patent (now expired),
 .B djpeg
 produces uncompressed GIF files.  These are larger than they should be, but
 are readable by standard GIF decoders.

irrlicht/source/Irrlicht/jpeglib/djpeg.c

@@ -2,7 +2,7 @@
  * djpeg.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
- * Modified 2009 by Guido Vollbeding.
+ * Modified 2009-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -298,7 +298,7 @@ parse_switches (j_decompress_ptr cinfo, int argc, char **argv,
       cinfo->mem->max_memory_to_use = lval * 1000L;
 
     } else if (keymatch(arg, "nosmooth", 3)) {
-      /* Suppress fancy upsampling */
+      /* Suppress fancy upsampling. */
       cinfo->do_fancy_upsampling = FALSE;
 
     } else if (keymatch(arg, "onepass", 3)) {
@@ -327,7 +327,7 @@ parse_switches (j_decompress_ptr cinfo, int argc, char **argv,
       /* Scale the output image by a fraction M/N. */
       if (++argn >= argc)	/* advance to next argument */
 	usage();
-      if (sscanf(argv[argn], "%d/%d",
+      if (sscanf(argv[argn], "%u/%u",
 		 &cinfo->scale_num, &cinfo->scale_denom) < 1)
 	usage();
 

irrlicht/source/Irrlicht/jpeglib/filelist.txt

 IJG JPEG LIBRARY:  FILE LIST
 
-Copyright (C) 1994-2009, Thomas G. Lane, Guido Vollbeding.
+Copyright (C) 1994-2013, Thomas G. Lane, Guido Vollbeding.
 This file is part of the Independent JPEG Group's software.
 For conditions of distribution and use, see the accompanying README file.
 
@@ -197,6 +197,8 @@ config.guess
 config.sub
 depcomp
 missing
+ar-lib
+compile
 install-sh	Install shell script for those Unix systems lacking one.
 Makefile.in	Makefile input for configure.
 Makefile.am	Source file for use with Automake to generate Makefile.in.
@@ -206,8 +208,6 @@ mak*.*		Sample makefiles for particular systems.
 jconfig.*	Sample jconfig.h for particular systems.
 libjpeg.map	Script to generate shared library with versioned symbols.
 aclocal.m4	M4 macro definitions for use with Autoconf.
-ansi2knr.c	De-ANSIfier for pre-ANSI C compilers (courtesy of
-		L. Peter Deutsch and Aladdin Enterprises).
 
 Test files (see install.txt for test procedure):
 

irrlicht/source/Irrlicht/jpeglib/install-sh

 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2011-01-19.21; # UTC
+scriptversion=2011-11-20.07; # UTC
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -35,7 +35,7 @@ scriptversion=2011-01-19.21; # UTC
 # FSF changes to this file are in the public domain.
 #
 # Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
+# 'make' implicit rules from creating a file called install from it
 # when there is no Makefile.
 #
 # This script is compatible with the BSD install script, but was written
@@ -156,7 +156,7 @@ while test $# -ne 0; do
     -s) stripcmd=$stripprog;;
 
     -t) dst_arg=$2
-	# Protect names problematic for `test' and other utilities.
+	# Protect names problematic for 'test' and other utilities.
 	case $dst_arg in
 	  -* | [=\(\)!]) dst_arg=./$dst_arg;;
 	esac
@@ -190,7 +190,7 @@ if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
     fi
     shift # arg
     dst_arg=$arg
-    # Protect names problematic for `test' and other utilities.
+    # Protect names problematic for 'test' and other utilities.
     case $dst_arg in
       -* | [=\(\)!]) dst_arg=./$dst_arg;;
     esac
@@ -202,7 +202,7 @@ if test $# -eq 0; then
     echo "$0: no input file specified." >&2
     exit 1
   fi
-  # It's OK to call `install-sh -d' without argument.
+  # It's OK to call 'install-sh -d' without argument.
   # This can happen when creating conditional directories.
   exit 0
 fi
@@ -240,7 +240,7 @@ fi
 
 for src
 do
-  # Protect names problematic for `test' and other utilities.
+  # Protect names problematic for 'test' and other utilities.
   case $src in
     -* | [=\(\)!]) src=./$src;;
   esac
@@ -354,7 +354,7 @@ do
 	      if test -z "$dir_arg" || {
 		   # Check for POSIX incompatibilities with -m.
 		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writeable bit of parent directory when it shouldn't.
+		   # other-writable bit of parent directory when it shouldn't.
 		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
 		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
 		   case $ls_ld_tmpdir in

irrlicht/source/Irrlicht/jpeglib/install.txt

 INSTALLATION INSTRUCTIONS for the Independent JPEG Group's JPEG software
 
-Copyright (C) 1991-2011, Thomas G. Lane, Guido Vollbeding.
+Copyright (C) 1991-2013, Thomas G. Lane, Guido Vollbeding.
 This file is part of the Independent JPEG Group's software.
 For conditions of distribution and use, see the accompanying README file.
 
@@ -418,54 +418,58 @@ support as follows:
 	    the directory containing the URT "librle.a" file (typically the
 	    "lib" subdirectory of the URT distribution).
 
-Support for 12-bit-deep pixel data:
+Support for 9-bit to 12-bit deep pixel data:
 
-The JPEG standard allows either 8-bit or 12-bit data precision.  (For color,
-this means 8 or 12 bits per channel, of course.)  If you need to work with
-deeper than 8-bit data, you can compile the IJG code for 12-bit operation.
+The IJG code currently allows 8, 9, 10, 11, or 12 bits sample data precision.
+(For color, this means 8 to 12 bits per channel, of course.)  If you need to
+work with deeper than 8-bit data, you can compile the IJG code for 9-bit to
+12-bit operation.
 To do so:
-  1. In jmorecfg.h, define BITS_IN_JSAMPLE as 12 rather than 8.
+  1. In jmorecfg.h, define BITS_IN_JSAMPLE as 9, 10, 11, or 12 rather than 8.
   2. In jconfig.h, undefine BMP_SUPPORTED, RLE_SUPPORTED, and TARGA_SUPPORTED,
-     because the code for those formats doesn't handle 12-bit data and won't
-     even compile.  (The PPM code does work, as explained below.  The GIF
-     code works too; it scales 8-bit GIF data to and from 12-bit depth
-     automatically.)
+     because the code for those formats doesn't handle deeper than 8-bit data
+     and won't even compile.  (The PPM code does work, as explained below.
+     The GIF code works too; it scales 8-bit GIF data to and from 12-bit
+     depth automatically.)
   3. Compile.  Don't expect "make test" to pass, since the supplied test
      files are for 8-bit data.
 
-Currently, 12-bit support does not work on 16-bit-int machines.
+Currently, 9-bit to 12-bit support does not work on 16-bit-int machines.
 
-Note that a 12-bit version will not read 8-bit JPEG files, nor vice versa;
-so you'll want to keep around a regular 8-bit compilation as well.
-(Run-time selection of data depth, to allow a single copy that does both,
-is possible but would probably slow things down considerably; it's very low
-on our to-do list.)
+Run-time selection and conversion of data precision are currently not
+supported and may be added later.
+Exception:  The transcoding part (jpegtran) supports all settings in a
+single instance, since it operates on the level of DCT coefficients and
+not sample values.
 
-The PPM reader (rdppm.c) can read 12-bit data from either text-format or
-binary-format PPM and PGM files.  Binary-format PPM/PGM files which have a
-maxval greater than 255 are assumed to use 2 bytes per sample, MSB first
-(big-endian order).  As of early 1995, 2-byte binary format is not
+The PPM reader (rdppm.c) can read deeper than 8-bit data from either
+text-format or binary-format PPM and PGM files.  Binary-format PPM/PGM files
+which have a maxval greater than 255 are assumed to use 2 bytes per sample,
+MSB first (big-endian order).  As of early 1995, 2-byte binary format is not
 officially supported by the PBMPLUS library, but it is expected that a
 future release of PBMPLUS will support it.  Note that the PPM reader will
 read files of any maxval regardless of the BITS_IN_JSAMPLE setting; incoming
-data is automatically rescaled to either maxval=255 or maxval=4095 as
-appropriate for the cjpeg bit depth.
+data is automatically rescaled to maxval=MAXJSAMPLE as appropriate for the
+cjpeg bit depth.
 
 The PPM writer (wrppm.c) will normally write 2-byte binary PPM or PGM
-format, maxval 4095, when compiled with BITS_IN_JSAMPLE=12.  Since this
+format, maxval=MAXJSAMPLE, when compiled with BITS_IN_JSAMPLE>8.  Since this
 format is not yet widely supported, you can disable it by compiling wrppm.c
 with PPM_NORAWWORD defined; then the data is scaled down to 8 bits to make a
 standard 1-byte/sample PPM or PGM file.  (Yes, this means still another copy
 of djpeg to keep around.  But hopefully you won't need it for very long.
 Poskanzer's supposed to get that new PBMPLUS release out Real Soon Now.)
 
-Of course, if you are working with 12-bit data, you probably have it stored
-in some other, nonstandard format.  In that case you'll probably want to
-write your own I/O modules to read and write your format.
+Of course, if you are working with 9-bit to 12-bit data, you probably have
+it stored in some other, nonstandard format.  In that case you'll probably
+want to write your own I/O modules to read and write your format.
 
-Note that a 12-bit version of cjpeg always runs in "-optimize" mode, in
-order to generate valid Huffman tables.  This is necessary because our
-default Huffman tables only cover 8-bit data.
+Note:
+The standard Huffman tables are only valid for 8-bit data precision.  If
+you selected more than 8-bit data precision, cjpeg uses arithmetic coding
+by default.  The Huffman encoder normally uses entropy optimization to
+compute usable tables for higher precision.  Otherwise, you'll have to
+supply different default Huffman tables.
 
 Removing code:
 
@@ -848,17 +852,23 @@ with /Oo-.
 Microsoft Windows (all versions), generic comments:
 
 Some Windows system include files define typedef boolean as "unsigned char".
-The IJG code also defines typedef boolean, but we make it "int" by default.
+The IJG code also defines typedef boolean, but we make it an "enum" by default.
 This doesn't affect the IJG programs because we don't import those Windows
 include files.  But if you use the JPEG library in your own program, and some
 of your program's files import one definition of boolean while some import the
 other, you can get all sorts of mysterious problems.  A good preventive step
 is to make the IJG library use "unsigned char" for boolean.  To do that,
 add something like this to your jconfig.h file:
-	/* Define "boolean" as unsigned char, not int, per Windows custom */
+	/* Define "boolean" as unsigned char, not enum, per Windows custom */
 	#ifndef __RPCNDR_H__	/* don't conflict if rpcndr.h already read */
 	typedef unsigned char boolean;
 	#endif
+	#ifndef FALSE		/* in case these macros already exist */
+	#define FALSE	0	/* values of boolean */
+	#endif
+	#ifndef TRUE
+	#define TRUE	1
+	#endif
 	#define HAVE_BOOLEAN	/* prevent jmorecfg.h from redefining it */
 (This is already in jconfig.vc, by the way.)
 

irrlicht/source/Irrlicht/jpeglib/jcapistd.c

@@ -2,6 +2,7 @@
  * jcapistd.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -145,7 +146,7 @@ jpeg_write_raw_data (j_compress_ptr cinfo, JSAMPIMAGE data,
     (*cinfo->master->pass_startup) (cinfo);
 
   /* Verify that at least one iMCU row has been passed. */
-  lines_per_iMCU_row = cinfo->max_v_samp_factor * DCTSIZE;
+  lines_per_iMCU_row = cinfo->max_v_samp_factor * cinfo->min_DCT_v_scaled_size;
   if (num_lines < lines_per_iMCU_row)
     ERREXIT(cinfo, JERR_BUFFER_SIZE);
 

irrlicht/source/Irrlicht/jpeglib/jcarith.c

 /*
  * jcarith.c
  *
- * Developed 1997-2011 by Guido Vollbeding.
+ * Developed 1997-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -362,7 +362,6 @@ METHODDEF(boolean)
 encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
 {
   arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
-  JBLOCKROW block;
   unsigned char *st;
   int blkn, ci, tbl;
   int v, v2, m;
@@ -381,14 +380,13 @@ encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
 
   /* Encode the MCU data blocks */
   for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
-    block = MCU_data[blkn];
     ci = cinfo->MCU_membership[blkn];
     tbl = cinfo->cur_comp_info[ci]->dc_tbl_no;
 
     /* Compute the DC value after the required point transform by Al.
      * This is simply an arithmetic right shift.
      */
-    m = IRIGHT_SHIFT((int) ((*block)[0]), cinfo->Al);
+    m = IRIGHT_SHIFT((int) (MCU_data[blkn][0][0]), cinfo->Al);
 
     /* Sections F.1.4.1 & F.1.4.4.1: Encoding of DC coefficients */
 
@@ -453,11 +451,11 @@ METHODDEF(boolean)
 encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
 {
   arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  const int * natural_order;
   JBLOCKROW block;
   unsigned char *st;
   int tbl, k, ke;
   int v, v2, m;
-  const int * natural_order;
 
   /* Emit restart marker if needed */
   if (cinfo->restart_interval) {
@@ -479,7 +477,8 @@ encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
   /* Sections F.1.4.2 & F.1.4.4.2: Encoding of AC coefficients */
 
   /* Establish EOB (end-of-block) index */
-  for (ke = cinfo->Se; ke > 0; ke--)
+  ke = cinfo->Se;
+  do {
     /* We must apply the point transform by Al.  For AC coefficients this
      * is an integer division with rounding towards 0.  To do this portably
      * in C, we shift after obtaining the absolute value.
@@ -490,13 +489,14 @@ encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
       v = -v;
       if (v >>= cinfo->Al) break;
     }
+  } while (--ke);
 
   /* Figure F.5: Encode_AC_Coefficients */
-  for (k = cinfo->Ss; k <= ke; k++) {
-    st = entropy->ac_stats[tbl] + 3 * (k - 1);
+  for (k = cinfo->Ss - 1; k < ke;) {
+    st = entropy->ac_stats[tbl] + 3 * k;
     arith_encode(cinfo, st, 0);		/* EOB decision */
     for (;;) {
-      if ((v = (*block)[natural_order[k]]) >= 0) {
+      if ((v = (*block)[natural_order[++k]]) >= 0) {
 	if (v >>= cinfo->Al) {
 	  arith_encode(cinfo, st + 1, 1);
 	  arith_encode(cinfo, entropy->fixed_bin, 0);
@@ -510,7 +510,8 @@ encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
 	  break;
 	}
       }
-      arith_encode(cinfo, st + 1, 0); st += 3; k++;
+      arith_encode(cinfo, st + 1, 0);
+      st += 3;
     }
     st += 2;
     /* Figure F.8: Encoding the magnitude category of v */
@@ -537,9 +538,9 @@ encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
     while (m >>= 1)
       arith_encode(cinfo, st, (m & v) ? 1 : 0);
   }
-  /* Encode EOB decision only if k <= cinfo->Se */
-  if (k <= cinfo->Se) {
-    st = entropy->ac_stats[tbl] + 3 * (k - 1);
+  /* Encode EOB decision only if k < cinfo->Se */
+  if (k < cinfo->Se) {
+    st = entropy->ac_stats[tbl] + 3 * k;
     arith_encode(cinfo, st, 1);
   }
 
@@ -549,6 +550,8 @@ encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
 
 /*
  * MCU encoding for DC successive approximation refinement scan.
+ * Note: we assume such scans can be multi-component,
+ * although the spec is not very clear on the point.
  */
 
 METHODDEF(boolean)
@@ -590,11 +593,11 @@ METHODDEF(boolean)
 encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
 {
   arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  const int * natural_order;
   JBLOCKROW block;
   unsigned char *st;
   int tbl, k, ke, kex;
   int v;
-  const int * natural_order;
 
   /* Emit restart marker if needed */
   if (cinfo->restart_interval) {
@@ -616,7 +619,8 @@ encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
   /* Section G.1.3.3: Encoding of AC coefficients */
 
   /* Establish EOB (end-of-block) index */
-  for (ke = cinfo->Se; ke > 0; ke--)
+  ke = cinfo->Se;
+  do {
     /* We must apply the point transform by Al.  For AC coefficients this
      * is an integer division with rounding towards 0.  To do this portably
      * in C, we shift after obtaining the absolute value.
@@ -627,6 +631,7 @@ encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
       v = -v;
       if (v >>= cinfo->Al) break;
     }
+  } while (--ke);
 
   /* Establish EOBx (previous stage end-of-block) index */
   for (kex = ke; kex > 0; kex--)
@@ -638,12 +643,12 @@ encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
     }
 
   /* Figure G.10: Encode_AC_Coefficients_SA */
-  for (k = cinfo->Ss; k <= ke; k++) {
-    st = entropy->ac_stats[tbl] + 3 * (k - 1);
-    if (k > kex)
+  for (k = cinfo->Ss - 1; k < ke;) {
+    st = entropy->ac_stats[tbl] + 3 * k;
+    if (k >= kex)
       arith_encode(cinfo, st, 0);	/* EOB decision */
     for (;;) {
-      if ((v = (*block)[natural_order[k]]) >= 0) {
+      if ((v = (*block)[natural_order[++k]]) >= 0) {
 	if (v >>= cinfo->Al) {
 	  if (v >> 1)			/* previously nonzero coef */
 	    arith_encode(cinfo, st + 2, (v & 1));
@@ -665,12 +670,13 @@ encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
 	  break;
 	}
       }
-      arith_encode(cinfo, st + 1, 0); st += 3; k++;
+      arith_encode(cinfo, st + 1, 0);
+      st += 3;
     }
   }
-  /* Encode EOB decision only if k <= cinfo->Se */
-  if (k <= cinfo->Se) {
-    st = entropy->ac_stats[tbl] + 3 * (k - 1);
+  /* Encode EOB decision only if k < cinfo->Se */
+  if (k < cinfo->Se) {
+    st = entropy->ac_stats[tbl] + 3 * k;
     arith_encode(cinfo, st, 1);
   }
 
@@ -686,12 +692,13 @@ METHODDEF(boolean)
 encode_mcu (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
 {
   arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
-  jpeg_component_info * compptr;
+  const int * natural_order;
   JBLOCKROW block;
   unsigned char *st;
-  int blkn, ci, tbl, k, ke;
+  int tbl, k, ke;
   int v, v2, m;
-  const int * natural_order;
+  int blkn, ci;
+  jpeg_component_info * compptr;
 
   /* Emit restart marker if needed */
   if (cinfo->restart_interval) {
@@ -922,7 +929,7 @@ jinit_arith_encoder (j_compress_ptr cinfo)
   entropy = (arith_entropy_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				SIZEOF(arith_entropy_encoder));
-  cinfo->entropy = (struct jpeg_entropy_encoder *) entropy;
+  cinfo->entropy = &entropy->pub;
   entropy->pub.start_pass = start_pass;
   entropy->pub.finish_pass = finish_pass;
 

irrlicht/source/Irrlicht/jpeglib/jcinit.c

@@ -2,6 +2,7 @@
  * jcinit.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 2003-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -29,6 +30,24 @@
 GLOBAL(void)
 jinit_compress_master (j_compress_ptr cinfo)
 {
+  long samplesperrow;
+  JDIMENSION jd_samplesperrow;
+
+  /* For now, precision must match compiled-in value... */
+  if (cinfo->data_precision != BITS_IN_JSAMPLE)
+    ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision);
+
+  /* Sanity check on image dimensions */
+  if (cinfo->image_height <= 0 || cinfo->image_width <= 0 ||
+      cinfo->input_components <= 0)
+    ERREXIT(cinfo, JERR_EMPTY_IMAGE);
+
+  /* Width of an input scanline must be representable as JDIMENSION. */
+  samplesperrow = (long) cinfo->image_width * (long) cinfo->input_components;
+  jd_samplesperrow = (JDIMENSION) samplesperrow;
+  if ((long) jd_samplesperrow != samplesperrow)
+    ERREXIT(cinfo, JERR_WIDTH_OVERFLOW);
+
   /* Initialize master control (includes parameter checking/processing) */
   jinit_c_master_control(cinfo, FALSE /* full compression */);
 

irrlicht/source/Irrlicht/jpeglib/jconfig.cfg

@@ -17,11 +17,17 @@
 /* Define this if you get warnings about undefined structures. */
 #undef INCOMPLETE_TYPES_BROKEN
 
-/* Define "boolean" as unsigned char, not int, on Windows systems. */
+/* Define "boolean" as unsigned char, not enum, on Windows systems. */
 #ifdef _WIN32
 #ifndef __RPCNDR_H__		/* don't conflict if rpcndr.h already read */
 typedef unsigned char boolean;
 #endif
+#ifndef FALSE			/* in case these macros already exist */
+#define FALSE	0		/* values of boolean */
+#endif
+#ifndef TRUE
+#define TRUE	1
+#endif
 #define HAVE_BOOLEAN		/* prevent jmorecfg.h from redefining it */
 #endif
 

irrlicht/source/Irrlicht/jpeglib/jconfig.h

@@ -15,13 +15,6 @@
 #undef NEED_SHORT_EXTERNAL_NAMES
 #undef INCOMPLETE_TYPES_BROKEN
 
-/* Define "boolean" as unsigned char, not int, per Windows custom */
-#ifndef __RPCNDR_H__		/* don't conflict if rpcndr.h already read */
-typedef unsigned char boolean;
-#endif
-#define HAVE_BOOLEAN		/* prevent jmorecfg.h from redefining it */
-
-
 #ifdef JPEG_INTERNALS
 
 #undef RIGHT_SHIFT_IS_UNSIGNED

irrlicht/source/Irrlicht/jpeglib/jdapistd.c

@@ -2,6 +2,7 @@
  * jdapistd.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2002-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *

irrlicht/source/Irrlicht/jpeglib/libjpeg.map

-LIBJPEG_8.0 {
+LIBJPEG_9.0 {
   global:
     *;
 };